Transcript
Xedio 3.02.08 - ReleaseNotes.doc
Authors: Benoit Géhénot, Christophe Wittevrongel Release Date: Version: May 2011 1.0
Release Notes Package 03.02.08
1 TABLE OF CONTENT 1
Table of content ............................................................................................................. 1
2
New Features (since Xedio 3.01.10) ......................................................................... 2 2.1
AVC-Intra 100 Support..................................................................................................... 2
2.2
IMX-D10 MXF OP1a (SMPTE) ....................................................................................... 2
2.3
Xedio Add-On (Direct Access to XT/XS) ......................................................................... 2
2.4
Xedio Playout Organizer Enhancements ......................................................................... 2
2.5
CleanEdit Player/Recorder Focus Color Configuration ................................................ 3
3
New Features (since Xedio 3.02.04) ......................................................................... 4 3.1
Xedio Add-On (re)configuration wizard ......................................................................... 4
3.2
Xedio Filter/Search Enhancements .................................................................................. 4
3.3
New Xedio “Light” Skin .................................................................................................... 4
4
Proxy Video Codecs ..................................................................................................... 4
5
SD Video Codecs ........................................................................................................... 5
6
HD Video Codecs .......................................................................................................... 5
7
CDM[2] software encoder Codecs ........................................................................... 6
8
Xedio Encoder software Codecs (3.2 only) ........................................................... 6
9
Xedio encoder SW/HW compatibility chart ........................................................... 7
10
Software compatibility chart................................................................................... 7
11
Partial Restore – Front Porch Digital (DIVArchive) ............................................. 7
12
EDL Export to Post-Production (AVID & FCP) ....................................................... 7
12.1
Export to Final Cut Pro..................................................................................................... 7
12.2
Export EDL to Avid Media Composer ............................................................................ 8
13
Requirements for Xedio Editing Workstations .................................................... 8
14
Major bug fixes (since Xedio 3.01.10) .................................................................. 9
ReleasePage Notes 2 Package 03.02.08
31/05/2011 Page 2 of 14
15
Known Bugs & Limitations ...................................................................................... 11
16
Releases/Features Nearing or Reaching End Of Life ..................................... 12
16.1
CleanEdit[Suite] ≤ 02.06.................................................................................................. 12
16.2
Microsoft SQL Server 2000 ............................................................................................ 12
16.3
Xedio CleanEdit – Cue Point Manager tab ................................................................... 12
16.4
CleanEdit[Suite] 2.07.xx .................................................................................................. 13
16.5
EVS MediaXChange ........................................................................................................ 13
17
Upgrade process from CleanEdit[Suite] v2.x ................................................... 13
18
Upgrade process from CleanEdit[Suite] v2.x AND Xedio 3.00.X ................ 13
19
Failover ........................................................................................................................ 13
20
Important Notes ........................................................................................................ 14
2 NEW FEATURES (SINCE XEDIO 3.01.10) 2.1 AVC-Intra 100 Support AVC-Intra 100 (1080i 50 & 59,94) is now supported by Xedio (browsing, editing, encoding, playout on Xedio i/o) in the following formats: MXF (EVS, OP1a SMPTE, P2 OPAtom and Avid OPAtom), QuickTime (Movie, Reference), Direct Rendering to XT/XS (through GbE)
2.2 IMX-D10 MXF OP1a (SMPTE) In addition to the MXF OP1a with XDCAM flavor, Xedio now supports IMX-D10 (30/40/50) MXF OP1a SMPTE.
2.3 Xedio Add-On (Direct Access to XT/XS1) 2.3.1.1 Multicam LinX code (123) not mandatory From Xedio Add-On 3.02 (i.e. Direct Access to XT/XS based on LinX/XTGW/SW Player) it‟s not mandatory anymore to activate the following code at Multicam level: Code 123 (LSM/Server/SpotBox LinX)
2.4 Xedio Playout Organizer Enhancements 2.4.1.1 CTRL+Double Click = Play as soon as possible Within Xedio Playout Organizer, CTRL-Double Click over an item (media or edit) in a playlist cues/preloads immediately this item and starts playing this item as soon as possible. This 1
Based on LinX, XT Gateway and EVS Software Player technologies
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 3 Package 03.02.08
31/05/2011 Page 3 of 14
item which was played before the CTRL-Double Click is freezed during this short period of time
2.4.1.2 ALT+Double Click = Cue Only Within Xedio Playout Organizer, CTRL-Double Click over an item (media or edit) in a playlist cues/preloads immediately this item (but not automatically played)
2.4.1.3 + Button
The + button adds only the selected items (not the whole search results) A Confirmation windows appears “x items will be added in the current playlist. Are you sure you want to proceed ?”
2.5 CleanEdit Player/Recorder Focus Color Configuration Xedio Manager (Software Parameter Profiles) now provides a new parameter to set the color of the rectangle above the job/shuttle withing Xedio CleanEdit (Player/Recorder Focus).
Figure 1 – Xedio Manager – CleanEdit Parameter Profiles – Acitve Windows Color
Figure 2 – CleanEdit Active Window Color
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 4 Package 03.02.08
31/05/2011 Page 4 of 14
3 NEW FEATURES (SINCE XEDIO 3.02.04) 3.1 Xedio Add-On (re)configuration wizard
This wizard can be used to easily configure or reconfigure your Xedio Add-On configuration (e.g. HD/SD, add a XT/XS server, …) in order to match customer premises configuration (XT, network, …).
3.2 Xedio Filter/Search Enhancements
Quick Text Search can now be applied together with an Advanced filter (AND). If the current user has no Saved filter (other than “Filter 0”), a filter “today” is automatically added to the Saved Filter (“creation date” is today). The most relevant fields (e.g. Creation Date, Class, Label, …) are listed first in the drop-down list.
3.3 New Xedio “Light” Skin A new skin (look‟n‟feel) is now available for all Xedio applications.
4 PROXY VIDEO CODECS Standards : PAL/NTSC EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 5 Package 03.02.08
31/05/2011 Page 5 of 14
Supported file formats: Long gop MPEG-1 TS/PS, Sony XDCAM proxy, Panasonic P2 proxy Rendering formats:
Long gop MPEG-1 TS/PS
5 SD VIDEO CODECS Standards : PAL/NTSC Supported file formats: Long gop MPEG TS/PS (MPEG1/2), Sony XDCAM (DV25, IMX-D10 30/40/50), MXF OP1a SMPTE (DVCPRO50, IMX30/40/50) Panasonic P2 (DVCPRO25/50), AVI (DVCPRO25/50), Quicktime Mov (DVCPRO25/50, IMX30/40/50), Quicktime ref (DVCPRO25/50, IMX30/40/50), Raw DV-DIFF (DVCPRO25/50), AVID OpAtom (DVCPRO50, IMX30/40/50), EVS (MJPEG, DVCPRO50, IMX30/40/50) and proxy, PCM wav audio files, Full screen stills (BMP, TGA, TIFF, JPEG), stills with one key (TGA, TIFF) for graphics/logos, stills sequence with two keys (TIFF) for transition effects. Rendering formats:
Long gop MPEG TS/PS (MPEG1/2), Sony XDCAM (DV25, IMX-D10 30/40/50), MXF OP1a SMPTE (DVCPRO50), Panasonic P2 (DVCPRO25/50), AVI (DVCPRO25/50), Quicktime Mov (DVCPRO25/50, IMX30/40/50), AVID OpAtom (DVCPRO50, IMX30/40/50), EVS (MJPEG, DVCPRO50, IMX30/40/50), PCM wav audio files, WM9.
6 HD VIDEO CODECS Standards : 1080i 50/59.94 Hz Supported file formats: Long gop MPEG TS/PS (MPEG-2 4:2:2 @ 50Mbps), Sony XDCAM HD2 (420/422) and proxy, Sony XDCAM Ex, MXF OP1a SMPTE (Avid DNxHD® DVCPROHD, AVC-Intra 100), Panasonic P2 (DCVPROHD, AVC-Intra 50/100), Quicktime Mov (ProRes LT, Avid DNxHD®, DVCPROHD, AVC-Intra 100), Quicktime ref (DVCPROHD, ProRes LT, AVC-Intra 100), AVID OpAtom (DNxHD®, DVCPROHD, AVC-Intra 100), EVS MXF(MJPEGHD, DNxHD®, DVCPROHD, AVC-Intra 100), stills (BMP, TGA, TIFF, JPEG), stills with one key (TGA, TIFF) for graphics/logos, stills sequence with two keys (TIFF) for transition effects. Rendering formats:
2
Long gop MPEG TS/PS (MPEG-2 4:2:2 @ 50Mbps), Sony XDCAM HD (420/422), MXF OP1a SMPTE (Avid DNxHD® DVCPROHD, AVC-Intra 100), Panasonic P2 (AVC-Intra 50/100, DCVPROHD), Quicktime Mov (Avid DNxHD®, ProRes, DVCPROHD, AVC-Intra 100), Quicktime ref (DVCPROHD, AVC-Intra 100), AVID OpAtom (DNxHD®, DVCPROHD, AVC-Intra 100), EVS MXF(MJPEG, DNxHD®, DVCPROHD, AVC-Intra 100).
Optical & SxS
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 6 Package 03.02.08
31/05/2011 Page 6 of 14
7 CDM[2] SOFTWARE ENCODER CODECS Standards : PAL/NTSC
7.1.1 Proxy codecs Encoding formats:
Long gop MPEG-1 TS
7.1.2 SD codecs Encoding formats:
Long gop MPEG-2 TS, Sony XDCAM OP1a Quicktime Ref (DVCPRO25/50, IMX30/40/50).
(DVCAM, IMX30/40/50),
8 XEDIO ENCODER SOFTWARE CODECS (3.2 ONLY) 8.1.1 Proxy codecs Standards : PAL/NTSC Encoding formats:
MPEG-1 (PS/Multistream)
8.1.2 SD codecs Standards : PAL/NTSC Encoding formats:
Long gop MPEG-2 (TS), Sony XDCAM OP1a (DVCAM, Quicktime Ref (DVCPRO25/50, IMX30/40/50), Avid OPAtom
IMX30/40/50), (DVCPRO50,
IMX30/40/50)
8.1.3 HD codecs Standards : 1080i (50/59.94 Hz) Encoding formats: Long gop MPEG-2 (TS), QuickTime Reference (DVCPROHD), Avid OPAtom (DVCPROHD)
Remarks regarding to all codecs:
All video and audio file formats above are supported with a maximum of 16 audio, for specific format only, @ 48KHz, in stereo pairs.
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 7 Package 03.02.08
31/05/2011 Page 7 of 14
9 XEDIO ENCODER SW/HW COMPATIBILITY CHART Xedio Encoder SW 3.02.10 3.01.16
Hardware
Validated
Xedio Encoder (PCX3) CDM2 (AVH)
OK - MPEG1 (PS or TS @1,5 Mb/s) - MPEG2@15Mb/s (4:2:2) with “OnLinePerf” value decreased (to 1) on Pmobile - MPEG2@12Mb/s (4:2:0) with “OnLinePerf” value set to max (15)
10 SOFTWARE COMPATIBILITY CHART Xedio 3.02.08 has been qualified on : - Multicam - IPDirector - XTAccess - XFile - MediaXChange - Xnet Monitor - Viz Artist™/Viz Engine™ - FinalCut Pro - Avid Media Composer - Front Porch Digital DIVArchive
10.04.26 5.91.50 1.15.28 2.14.10 1.16.04 (unchanged) 1.01.24 3.3 (see limitations in section 15) 7.0 (for EDL export using Keres) 5.0 (for EDL export using Keres) 6.23 and 6.34,5
Please contact Xedio Product Managers if you need to run Xedio with any other version.
11 PARTIAL RESTORE – FRONT PORCH DIGITAL (DIVARCHIVE) FPD DIVArchive Partial Restore has been validated in High Definition only for the following formats in 1080i 50Hz: Sony XDCAM HD 4:2:2, ® Avid DNxHD (MXF OP1a SMPTE & EVS, Quicktime), DVCPROHD (MXF OP1a SMPTE & EVS, Quicktime) Please contact Xedio Product Managers if you need to use Partial Restore with another codec or format.
12 EDL EXPORT TO POST-PRODUCTION (AVID & FCP) 12.1 Export to Final Cut Pro Xedio PLST to FCP module allow to create an FCP EDL from Xedio Edit. This module supports: 3
Partial Restore supported in MPEG-2 TS (SD only) and XDCAM HD4:2:2 Partial Restore supported in MPEG-2 TS (SD only), XDCAM HD4:2:2, DVCPROHD (QT MOV, MXF EVS and MXF OP1a), DNxHD (MXF OP1a and MXF EVS) and ProRes LT (QT Mov & Ref) 4
5
6.3 not compatible with space/blank in label (See Defect XTD3981)
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 8 Package 03.02.08
31/05/2011 Page 8 of 14
Video Transitions (fade, wipe, wipe fade, Dip, Cut) Audio Transitions ( mode, Cross Fade) Film effect & Flip Video effects (Mirror, Color Fade, Grey) Split Audio Voice-Overs Media Files can be exported to FCP storage (with guardbands) OR thesefiles can stay on Xedio storage & are shared with FCP.
12.1.1 Supported File Codec/Format 12.1.1.1
Standard Definition
Standards : PAL/NTSC Supported file formats: Quicktime Mov (IMX30/40/50), Quicktime ref (DV50, IMX30/40/50)
12.1.1.2
High Definition
Standards : 1080i 50/59.94 Hz Supported file formats: Quicktime Mov (DVCPROHD), Quicktime ref (DVCPROHD)
12.2 Export EDL to Avid Media Composer Xedio PLST to Avid Media Composer module allows to create an Avid AAF EDL + OPAtom + WAV files from Xedio Edit. This module supports: Split Audio Voice-Overs Video Transitions: Cut, Mix, Wipe, Border Wipe and Dip to Color Video Effects: Grey, Horizontal Mirror Audio Transitions: only cut & Cross Fade centered ehavior al. Audio Level Media Files are rewrapped to OPAtom and copied to Avid dedicated storage (with guardbands). No superposition of effects available. If you use an unsupported effect/transition: this will not prevent the tool to work. Simply, the effect/transition will not be taken over in Avid Media Composer.
12.2.1 Supported File Codec/Format 12.2.1.1
Standard Definition
Standards : PAL/NTSC Supported file formats: Sony XDCAM MXF (IMX-D10 30/40/50), MXF OP1a SMPTE (DVCPRO50)
13 REQUIREMENTS FOR XEDIO EDITING WORKSTATIONS Operating System: Windows XP Pro SP3 (32 bits) VGA display resolution: min. 1280x1024
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
ReleasePage Notes 9 Package 03.02.08
31/05/2011 Page 9 of 14
SD & Proxy Editing: min. Core 2 Duo 2GHz CPU (1GB RAM) HD Editing : min. Core 2 Quad 2.6GHz CPU (2GB RAM)
Xedio editing with 16 audio has been validated on a
[email protected] GHz CPU with 3GB RAM. The edits were made of : -
Codecs used in timeline :
AVC-Intra MXF Op1A o DVCPRO HD QT Ref o MPEG2 HD 50 XDCAM (XDCAM HD 422) o MPEG2 TS @50 All with 16 audio (except for XDCAM) o
-
-
-
Audio output settings: o A1 : ST o A2 : ST o A3 : ST o A4 : Empty o A5 : 5.1 Content o Succession of 2 seconds clips with 12 frames audio and video mixes Additional video transitions : o 2 seconds of RTDs used several times on different video transitions (preloaded once, on start) Video clip effects used: o Color correction o Color fades o Zooming (keyframe effect) o Horizontal mirror Graphics : o One CG (with fades) over the video on the entire edit o One “logo” (with fades) over the video on the entire edit
HD virtual editing in 1080i@59,94, has been validated in CleanEdit with same hardware and edit types without RTD effect. HD editing is limited to (less than) 120 Mbps codec. In addition, an Xstore [2.3] or an “i7” workstation is highly recommended.
14 MAJOR BUG FIXES (SINCE XEDIO 3.01.10) TD2830
CleanEdit
TD3882
Approval
LinX/Xedio Add-On – No keyword present when importing clips from XT (Direct Access). Player in Xedio Approval display is strange when resizing
TD4384
Manager
Custom keyboard profiles : not applied
TD4403 CS6935 TD3381 CS5129
Task Engine
Many XedioTaskEngine.dmp and AgentHost.dmp
Ingest Organizer
Old SchedulerLocks entries should be removed automatically
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
Release Notes Page 10 Package 03.02.08 TD3383 CS5129 TD3591 CS5674 TD3600 CS5162 TD3705 CS5693 TD3730 CS5659 TD3972 CS6150 TD4027 CS6278 TD4040 CS6203 TD4088 CS6388 TD4153 CS6459 TD4170 CS6521 TD4200 CS6588 TD4327 CS6839 TD4336 CS6863 TD4341 CS6840 TD4345 CS6753 TD4348 CS6993 TD4448 CS6993 TD4449 CS7018 CS7830
Xedio Manager
CS7831
Xedio Browse
20112903#006
Xedio Browse
20112903#007
Approval Media File Cleaner CleanEdit CleanEdit
31/05/2011 Page 10 of 14
Media cannot be delete because the SchedulerLocks is not deleted before the Scheduler entry is deleted. [BHRT] Xedio Approval does not set the the „P‟, „V‟ statuses for Media or Clips. Need a way to find Orphaned (low res + hi res) files (no reference into DB) CE Flashes and needs to be killed if the CLUEPOINTTHUMB directory is not declared under XM/Media/Servers VX222e Mic equalizer not available anymore.
CleanEdit
CE Timeline duration gets crazy if one uses the „In/Out delete‟ while only a mark-out is set. Failed to import tag in TGA, error message
Archive
Diva restore/archive jobs always have a priority set to 50
Playout Server
pcpControlRoom complains about DB cnx issue while the cnx is OK.
Cutter
MXF Media in „Archiving‟ status do not display a now line when opened in the CEPlayer Xedio Explorer does not feature the “Create Edit” button while it was used in 3.0 Despite a definition failed and despite a defs.ReturnValue is set as condition, another block is executed OCX rendering: Rendered file created with 8 Audio
CleanEdit
Xedio Explorer Task Engine RenderingOCX Playout Organizer Task Engine
“Goto Previous Item” Button
Playout Organizer Importer
BHRT : POO hang
ehavior changed
Rendering process stops
Manager
Imported medias should be renamed while being copied into the media server. Ganging not usable in CleanEdit
WebServices
httpd.exe error at windows shutdown
Xedio Browse
Xedio Manager
There are no any possibilities to find only Virtual medias or only medias with Xedio Browse Search. On all our stations we use resolution 1280x1024 and it is maximum value that we can achieve. If we can use some search criteria for example creation date with between function some search function will be invisible Xedio Browse crashes (logs in attachment) if we create virtual media which overlaps with existing virtual media (test overlap function is on). It is impossible duplicate edit with XEM with error in attachment.
20113003#009
CleanEdit
It is impossible duplicate Edit in edit area
20113003#010
CleanEdit
It is impossible duplicate Project in Xedio Cleanedit
20113003#011
CleanEdit
It is impossible cope edit which was created by other user to project.
CS7966 CS8090
Xedio Playout
Adjust Item not working properly.
EVS Broadcast Equipment
On the adjusted item, the video continued past the mark out BUT the audio stopped
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
Release Notes Page 11 Package 03.02.08
31/05/2011 Page 11 of 14
as it should.
XTD4990 XTD4975 XTD5007 XTD4966
Xedio POO
Playout Organizer crash when playing in loop
Xedio POO
PORetrimmer.exe process is not stopped.
CS7966 XTD4990
Xedio Playout
Adjust Item not working properly.
XeTD5049
Framework
On the adjusted item, the video continued past the mark out BUT the audio stopped as it should.
20112204#039
CS7981 XeTD5047 CS7807 XeTD4898 XeTD5047 CS7981 XeTD5009
Framework Framework Framework Framework
Xedio CleanEdit VO][impact only audiostreamermode key in new installation Direct Access to a XT Train does not work when there is no video signal on the XT in.] [impact only dnxhd xt train] Impossible import *.dv files from AVID (AFi or MediaImporter module)][impact media type DV Direct Access to a XT Train does not work when there is no video signal on the XT in. CleanEdit Slowness
15 KNOWN BUGS & LIMITATIONS XTD2182 XTD3017 XTD3981 XTD3383 CS5129 XTD3629 XTD3673 CS5817 XTD3040
CleanEdit
When cutting into 2 parts a clip containing an Highlight or pixelmask effect, the effet disappears from the second part. CleanEdit The Character Generator might introduce slight color changes when text is applied over the video. Archive/FPD Impossible to Archive media file with blank character with DivArchive 6.3. Xedio Manager Media cannot be deleted because the SchedulerLocks is not deleted before the Scheduler entry is deleted. Codecs QuickTime Ref and Mov files do not support more than 8 audio tracks. CleanEdit Xedio Zoom shows noticeable pixelization. XT integration
The guardbands value, defined on EVS video servers (for clip creation), cannot exceed 300 fields. H.264 TS Proxy file cannot be archived.
XTD4076
Xedio Archive
XTD1781 CS2966
Xedio Ingest Organizer
All Xedio Ingest Organizer Workstation (or any other Xedio Ingest client workstation) MUST have the same Windows Regional Setting.
XTD3599
All Xedio client software
The use of onboard graphic chipsets should be avoided on all Xedio workstations (to reach high-quality performances).
XTD4176
Xedio Approval Status not correct in DB List.
XTD4256 XTD4119
Xedio Encoder AVH and 3.0 Xedio TE
XTD4585
Xedio Playout
EVS Broadcast Equipment
Frame sync is guaranteed with up to 5 sec of video signal loss on one of both encoders when working with Hires/Lowres. TaskEngine does not start due to a DB upgrade that does not take place. Workaround: Stop the mirroring, do the upgrade, then restore the mirroring. All AVCi 100 formats are only supported using Xedio i/o for playout. PCX[1/2] does not support playing AVCi 100. Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
Release Notes Page 12 Package 03.02.08
31/05/2011 Page 12 of 14
Xedio “Add-On” wrong aspect ratio (4/3 instead of 16/9) when I do a rendering in XDCAM DV25 CE or Agent Host crashing when rendering to 2 XT‟s at the same time. (in parallel) Using the “previous” button in a playlist makes it impossible to go over a comment line. In addition, comments are displayed with wrong characters in several languages. ProResLT is not supported in direct access (Xedio Add-On)
XTD4668
CleanEdit
XTD4739
Xedio TE
XTD4772 XTD4771
Playout Organiser
XTD4791
Xedio Add-On
XTD4801
For Xedio Encoder/CDM encoding in Quicktime Reference, it‟s not allowed to create bloc with a duration > 2 hours !
XTD4751
Xedio IO (Ingest) CDM Xedio Archive
XTD4895
Xedio Probe
The new skin (light or dark) is not supported by Xedio Probe software. If it was installed with a skin, the following registry key should be set to 1 to disable it :
FTP device for Xedio Archive is not supported in Xedio 3.2
[HKLM\SOFTWARE\EVS Broadcast Equipment\CleanEdit Suite\CESkin] “Normal”=dword:00000000
XTD4960 20113003#008
TD2992
Xedio Manager Lock Treated function doesn‟t work if it is enabled in XEM, means possible change treated media. Xedio Browse Logout function in Xedio Browse cannot be actived
20113003#020
XeTD5060
Xedio
Custom Metadata – Default Value not taken into account
XeTD5037 CS8007 XeTD5062 20112704#042 XeTD5107 20110505#053 XeTD5071 20112204#038 XeTD5159
Xedio CleanEdit Xedio
Unstable CE
Xedio CleanEdit Xedio CleanEdit Xedio
Bad sorting of items in the "bin" area
XeTD5175
Xedio Archive
Xedio CleanEdit search. Class filter not saved
Xedio CleanEdit Playout TAB Xedio Playout : unable to configure PCX3 genlock phase in control panel MediaID to appear in Diva -> comments field
16 RELEASES/FEATURES NEARING OR REACHING END OF LIFE 16.1 CleanEdit[Suite] ≤ 02.06 CleanEdit[Suite] version ≤ 2.06 support is now discontinued.
16.2 Microsoft SQL Server 2000 Microsoft SQL Server 2000 is not supported anymore.
16.3 Xedio CleanEdit – Cue Point Manager tab Cue Point Manager tab (Xedio CleanEdit) support is being discontinued on June 30, 2011. (replaced by IPDBrowse Plugin).
EVS Broadcast Equipment
Email :
[email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
Release Notes Page 13 Package 03.02.08
31/05/2011 Page 13 of 14
16.4 CleanEdit[Suite] 2.07.xx CleanEdit[Suite] 02.07.xx support is being discontinued on June 30, 2011.
16.5 EVS MediaXChange EVS MediaXChange support (for LoRes generation) is being discontinued on June 30, 2011 (replaced by XTAccess).
17 UPGRADE PROCESS FROM CLEANEDIT[SUITE] V2.X
The database upgrade process, launched from XedioManager on the database server, must be done with an existing user having administrative privileges. This has to be done in the ODBC setup. The database upgrade process will then change the current status of the EVS user to give him the administrative privileges as well.
The codec profiles set in Xedio Manager for use in case of Fast Motion (in CleanEdit) should be re-selected after upgrade to 3.0
The CleanEdit software parameters set in XedioManager under the “Archivage” tab, must be manually reported in the new “Archive” tab.
Database triggers and stored procedure modified in package 2.7 will be overwritten when installing Xedio 3.0. The changes that have been made should be carried forward to the database after the upgrade process to ensure same workflow behavior.
Playout servers .par files should be managed individually (per machine) regarding to its CPU and its playout resolution (XTD3335).
18 UPGRADE PROCESS FROM CLEANEDIT[SUITE] V2.X AND XEDIO 3.00.X
From Xedio 3.01 on, the encoding and rendering processes (e.g. Xedio CleanEdit, Xedio Task Engine) need the EVS Global Serial Number to be set up in the registry. To do so, please launch the EVSSerialNumber.exe. From Xedio 3.01 on, if your setup uses Xedio Task Engines and a mirrored SQL DB then the mirroring shall be stopped during the installation of the scheduler web service. See also the Important Notes at the end of this document. During an upgrade, all Xedio applications, including the services, must first be closed. For Xedio Add-On or any other setup using LinX protocol (direct access to XT/XS server): Xedio Manager>Softwares>Parameter Profiles>
i. Notification center IP address & port are emptied, don‟t forget to update this address after your upgrade ii. XedioBroker IP address & port are emptied, don‟t forget to update these parameters after
19 FAILOVER Xedio MOS Gateway, Xedio Archive Server and Xedio Control Center can now be installed on a redundant environment using EVS Failover solution (EVSDBIP). EVS Broadcast Equipment
Email : [email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
Release Notes Page 14 Package 03.02.08
31/05/2011 Page 14 of 14
To setup the software in order to enable this redundancy solution a “-e” must be added in the AppGuard command line to the call of the software as described hereunder. "C:\Program Files\EVS Broadcast Equipment\XedioMOSGateway\AppGuard.exe" -r 2 -n 60000 -s -e "C:\Program Files\EVS Broadcast Equipment\XedioMOSGateway\XedioMOSGateway.exe" "C:\Program Files\EVS Broadcast Equipment\XedioControlCenter\AppGuard.exe"-r 2 -n 60000 -s -e "C:\Program Files\EVS Broadcast Equipment\XedioControlCenter\XedioControlCenter.exe" "C:\Program Files\EVS Broadcast Equipment\XedioArchive\AppGuard.exe" -r 2 -n 60000 -s -e "C:\Program Files\EVS Broadcast Equipment\XedioArchive\XedioArchive.exe"
20 IMPORTANT NOTES
From Xedio 3.01 on, if Xedio Task Engine is used on you setup, then you MUST install XedioWSxxx.exe (check “Install Task Scheduler”) AND XedioTaskEnginexxx.exe ! For Xedio workflows based on XT/XS/IPD/XTAccess, the Primary TC MUST always be LTC (not User TC). For CleanEdit HD with direct access to XT/XS, DNxHD 100 Mbps is the only codec supported. Xedio DB Server & Software modules are only supported on the following Operating Systems: Windows Server 2003 R2 (32 bits) Windows Server 2003 R2 (64 bits) – ONLY for DB Server (SQL Server 2005) Windows XP Pro SP3 (32 bits) Xedio Browse Virtual Clip is not supported anymore. In Xedio Archive and Xedio CleanEdit software parameter Profiles, using Xedio Manager, activating the “DeleteHiRes” option without selecting the Archive Option “ArchiveHiRes”, will not erase any Media from the storage without archiving them first. The setup of Thumbnails folder for Xedio i/o's (in Xedio Manager / Encoder / Physical Manager / Preview thumbnails path) must be configured to store the files on one of the Media Servers (central storage / SAN). This folder must be shared. Before working with 5.1 audio, the Xedio Manager General Settings and the rendering profiles shall be adjusted to match audio assignment needs. In CleanEdit, the recorder window always displays the 5.1 monitoring options in first position. CleanEdit workstations shall be installed only with fonts supported by the Windows code page used. For a Xedio software upgrade, it is recommended to install the new software on top of the previous version (no uninstall). The white EVS Remote is not supported anymore. MOG Solution tools to merge clips or extract Hires audio while importing XDCAM DV25 clips is not supported anymore in Xedio. Before any upgrade, database triggers, profiles (rendering & encoders) and RTProfs that are used in a setup must be analysed by EVS. Xedio applications do not support UNICODE. For vizRT integration: A viz animation cannot contain any PAUSE, A viz animation cannot contain more than one STOP and All the viz animations must be stretchable. Edit made with Xedio 2.07 and containing viz Gfx cannot be imported/upgraded to Xedio 3.01 H.264 proxy is not supported in Xedio 3.2 package even if the encoding and rendering profiles appear in some software drop down lists.
EVS Broadcast Equipment
Email : [email protected]
Tel: +32-4/361 70 00
FAX: +32-4/361 70 99
