Transcript
Repetrel Software Printing Steps – ABS
Hyrel LLC
Repetrel 3D Software Printing Basics Repetrel is a robust 3D Printing Software developed by Hyrel. Repetrel is a based on the Repetier platform, has embedded Slic3r software, and we provide in-house recipes to optimize your 3D Printing experience. Our research and testing of how different printing variables affect different materials allows us to provide you with a large number of unique Slic3r Recipes to use based on your needs. You can choose the default recipes we provide and recommend, but you can also create custom recipes based on special or complex build requirements, materials, work environment, etc. The following two pages detail our naming conventions for different Repetrel Screen areas. The first diagram is the first page that appears in Repetrel. We informally call these areas by their physical screen location. • • •
Main Top Menu Bar Left Side Window Right Side Window
The second diagram details out more specific items and areas of the Repetrel Software. The Right Side Working Area Window is where you Open STL and GCode files, Select Recipes and Process STL files for Slicing, ultimately generating your GCode file. You also have options for manipulating your 3D Object with regards to size, position and orientation to the build platform. There are more advanced options on the right side where you can view, search, and edit GCode data instructions. The Left Side Window contains two frequently used tabs: the 3D View Tab for viewing 3D STL and GCode Objects in different perspectives, zooming in an out, and use your mouse to navigate and move your object freely on the bed. The Control Tab view displays options for controlling and configuring up to four print heads and your heated print bed platform. We configure your printer to work out of the box, but you can also verify and dial in your print bed and print heads to ensure all settings are correct, including: Tramming (Leveling) your print bed, Calibrating the Z Height distance between print head nozzle and print bed. You can even Fine Tune the Z Height as your first layer is printing, if needed. The goal in developing Repetrel was to provide a single access page for the most common tasks. Many of the areas will not be used as frequently, especially for new prints. This document lists the steps required to perform basic printing steps and a quick communication check if needed. This document will illustrate screen areas, buttons, tabs, pull down menus and basic tasks required for printing. For simplicity, we are listing the basic printing steps.
REPETREL Printing Steps V01d.docx
Page 1 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Repetrel 3D Software Navigation Overview
REPETREL Printing Steps V01d.docx
Page 2 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Repetrel 3D Software Diagram
REPETREL Printing Steps V01d.docx
Page 3 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Printing Steps for Hyrel System 30 using Repetrel Software Repetrel requires a configured GCode File to send the print command to the 3D Printer. The following Repetrel Steps are required to convert an STL File in to a Printable GCODE File. 1. Open an STL File in Repetrel to prepare for 3D Print. a. Go to the Right Side Screen, Select Project Composer Tab.
2. Click the
Pull Down menu, then path: Add STL File => Open STL
3. The default directory for Repetrel First Prints using STL Files should appear. • If not, navigate to C:\Repetrel\First Prints\stls\
REPETREL Printing Steps V01d.docx
Page 4 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
4. Click to select the STL File you will use, then Click the
REPETREL Printing Steps V01d.docx
Page 5 of 12
button.
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
The Repetrel window will appear.
Your STL File appears on the Object Tree. The 3D Object appears in the 3D Tab View. Note: The (0,0,0) origin of your STL file will be centered on the (0,0,0) origin of the Build Platform. 5. To Center the STL Object File: a. Click the
REPETREL Printing Steps V01d.docx
tab, then Click the
Page 6 of 12
Bullseye button.
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Note: The3D Object now should be centered, if your model was centered about the (0,0,0) point. If not, Right Click on the physical object and hold and drag the Object to the center or change your OffSets values manually. In order to Print, we need to generate GCODE File from the STL. The first step is to Verify and Select the SLICER Recipes specific for your print. Repetrel comes with default recipes for different materials including ABS. If your recipes are not already saved by default or you have changed them, correct them and save the Recipes by clicking Save As Default. SLICING the STL File Slicing the STL File takes the STL File with your selected recipes to create a GCODE file. To Slice your STL file take the following steps. 1. Click the SLICER Tab . 2. The Repetrel / Slicer (Slic3R) Recipes selection boxes will appear.
3. If you have not selected your recipes, Select the items listed below before SLICING. • Select the Pulldown menu Buttons for each of the fields above. • Scroll and select the correct recipes for the material you are printing with. • For an ABS Print, the defaults recipes should read as follows. Print: Printer: Extruder 1: Extruder 2: Extruder 3: Extruder 4: REPETREL Printing Steps V01d.docx
HYREL Z.2 S1800 noSprt HYREL 30M HYREL ABS 230c Fan 50% HYREL ABS 230c Fan 50% HYREL ABS 230c Fan 50% HYREL ABS 230c Fan 50% Page 7 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Note: If you are printing with just one print head, it is only necessary to enter the recipe for Extruder 1. Ignore Extruders 2, 3, & 4 for Single Head Prints.
•
Click the
4. Click the
button, to save your settings for later prints.
pull down menu, then Click Slice with Slic3r
The following progress window appears. You would rarely have to Kill Slicing Process, other than to redo a step you missed.
Once the Slicing Process is complete, you will notice two things: • •
Text displaying “Exporting GCODE to C:Users\(User Name)\Documents\Slic3rOutputFile.GCODE”. Repetrel adds the GCODE File to the Process Tree, just below the STL File.
REPETREL Printing Steps V01d.docx
Page 8 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
•
Hyrel LLC
Your GCODE Object appears overlaying the STL File with different color and opacity.
REPETREL Printing Steps V01d.docx
Page 9 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
5. Click the button. • Repetrel will process all of the information to send to the printer. • Repetrel will indicate “Writing Print Job”. • The Print Timer begins, showing progress toward your Estimated Print Time. The example below shows an in process print, already printing 50:25 minutes out of a 6 hours.
When the print is complete, Repetrel will automatically turn the heat and power off to the Print Head and the Heated Build Platform, if you use our recipes.
The following sections detail how to check and if needed, troubleshoot communication problems between the Tablet/PC and the System 30 Printer.
REPETREL Printing Steps V01d.docx
Page 10 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Checking Communication between Tablet/PC and Printer When you Open Repetrel, if Repetrel sees the printer, you will receive confirmation in the Log File Display Screen (Hyrel Printer Found, SW REV.Hy: Rev_2.414), indicating communications between Repetrel and the Printer. The Rev_2.414 indicates the Printer System Board Controller Firmware revision number. The first line lists the Repetrel Version number (Repetrel v2.855).
If “Hyrel Printer Found” confirmation does not appear in the left Log Window, try these quick checks.
1. Click the Button pull down menu, then Click Turn Light On. a. If the Printer Bed Light turns on you are communicating with the printer. 2. Also, Under the Control Tab, Repetrel will recognize the Print Head and the Print Bed, and you can power both on and off. If the light does not turn on and you do not see the Print Head and Bed, see troubleshooting steps on the next page.
REPETREL Printing Steps V01d.docx
Page 11 of 12
8/12/2016 2:38:00 AM
Repetrel Software Printing Steps – ABS
Hyrel LLC
Troubleshoot Communication problems between the Table/PC and 3D Printer
1. Click the
button in Repetrel (Top Right). Then repeat the Light check above.
If you still are not communicating with the printer, try the Comm Link Tab. 2. Under the Right Side Sub Menu - Click the
Tab.
a. Click the
button and click REFRESH.
b. Click the
button and select the highest Com number.
c. Click the Baud Rate button
d. Click the
e. Click
and select 38400.
to save your settings.
to send a communication test to the printer.
See confirmation message in the text box, confirming “Connected to Printer”.
REPETREL Printing Steps V01d.docx
Page 12 of 12
8/12/2016 2:38:00 AM
