Transcript
VIDEO WALLS Product Catalogue
Creative Solutions to Engage Viewers
WWW.X-VIEWMEDIA.COM
X-VIEW DPXe A COMPELLING CHOICE FOR VIDEO WALL SOLUTIONS TV STUDIO VIDEO WALLS CONTROL ROOM DISPLAYS
• • • • • • • • •
INTERACTIVE DISPLAYS RECEPTIONS MEETING ROOMS
DIGITAL SIGNAGE MALL DISPLAYS
Custom processor configurations Variety of Input modules HD outputs Portrait, Landscape or Mixed display formats Custom Layouts with Scheduling Mixed display sizes & resolutions Creative Wall Displays Real Time Multi Point Wall Control Reliable and Easy to use
HD TV STUDIO VIDEO WALLS X-View DPXe allows you to place multiple inputs on the wall with the ability to position and size any input across the wall, position input windows over maps or other inputs freely without limitations.
HIGH RESOLUTION VIDEO WALLS X-View DPXe drives each and every monitor in the video wall at maximum resolution, which means that incorporating multiple display monitors in your wall display will result in a higher resolution. This is the complete opposite of many traditional video wall processors or display monitors with built in wall splitter functions, with these type of systems the more monitors you use in your wall display results in a lower overall resolution.
UNCOMPROMISING QUALITY BEYOND HD WITH X-VIEW DPXE
X-VIEW DPXe MODULAR DESIGN CONCEPT Configuring a wall processor solution with X-View DPXe is quick and easy, based on the modular design concept, future changes and upgrades can be carried out in the field effectively. The X-View DPXe design concept is very simple, a central master processor frame is used which houses the processor and wall control application software, X-View DPXe provides a choice of processor frames to suit individual application requirements.
HD OUTPUTS
PLUG IN MODULES -EASY UPGRADES The XV-IMG4 output module provides 4 high resolution DVI or VGA outputs per card, with the ability to drive displays in landscape, portrait or a mix of both, simply add the number of cards to match the number of display monitors in the video wall to either the main or salve frames.
WIDE RANGE OF INPUT MODULES DVI, VGA, YUV, RGB, CV, YC, HDMI, SD-SDI, HD-SDI, 3G-SDI, IP VIDEO You can mix and match the required input cards in any master or slave frame to create a custom configuration.
EASY OPERATOR CONTROL MULTI USER SINGLE LICENSE • Unlimited Layouts • Interactive Touch Screen Walls • RS232 Control / LAN Control • On Screen Mouse Control • License per system not by user • Video preview on remote IP Camera Inputs
• Sequence & Schedule Layouts
X-VIEW XV-X4 4 CHANNEL DISPLAY WALL CONTROLLER The latest addition to the X-View video wall processor range is the XV-X4 standalone display wall controller that accepts either a single link or dual link DVI-D input and 4 DVI/VGA outputs. The XV-X4 is an ideal solution for digital signage and corporate display wall applications, a choice of 1RU rack mount or standalone compact frames are available. Each output can be driven as DVI/VGA and can represent an arbitrary region of the original input image. The output resolution and frame rate does not need to be related to that of the input as the XV-X4 will optionally upscale and frame rate convert each region independently. Additionally each output can be independently mirrored or rotated through 90, 180 or 270 degrees to support creative mixes of landscape and portrait displays.
24/7 OPERATIONAL RELIABILITY COUPLED WITH UNCOMPROMISING SUPPORT X-View DPXe processors provide robust, reliable solutions for mission critical environments; Redundant power supplies, RAID drives and plug-in cards on a backplane system means servicing and upgrades can be carried out on location. Each system is individually configured and thoroughly tested before it is shipped out. In the event of any problem we are happy to help, by connecting the systems to the internet we are able to remote in and diagnose, update & reconfigure any system, you can rest assured that not only will you get support from our dealers and system integrators, you also have a direct support option with e-mediavision.
VIDEO WALL, CONTROL ROOM, DIGITAL SIGNAGE SYSTEMS DESIGN SERVICE e-mediavision can design and provide complete display wall solutions for a variety of applications, a complete service that includes the design, processors, displays, custom mounts, cables and distribution and switching systems is available.
X-VIEW DPXe COMPONENTS FOR HIGH DEFINITION VIDEO WALLS STAND ALONE CONTROLLERS - X-VIEW XV-X4 The X-View XV-X4 is a stand alone controller that accepts single or dual link DVI input and can flexibly display this across four output monitors in DVI or VGA. Each display output can be mirrored or rotated independently through 90, 180 or 270 to support creative mixes of landscape and portrait monitor layouts. The XV-X4 can be combined with the XV-DL8 distribution amplifier to enable bigger and more creative wall displays. The controller is available in 1RU rack mount or compact desktop frames. Multiple XV-X4 can be combined to create imaginative wall displays or combined with standard X-View Frames to add multiple inputs
SPECIFICATIONS Physical Dimensions
x4 - 235 x 175 x 44mm/9.25” x 6.9” x 1.75” x4-1U: 438 x 173 x 40mm/17.24” x 6.81” x 1.57”
Operating Temperature Range
0 - 35 DegC/32 - 96 DegF
Power Requirements
5V DC, 18W. Universal mains power adapter supplied (100-240V) X-View XV- x4-1U: Internal PSU
USB 2.0
Full speed (12Mbits/s) operation supported
Cooling
Internal Fan, Input/Output vents should not be restricted. XV-X4-1RU has a larger fan for low noise.
1x Dual link DVI capture
To 330Mpixels/s
Input Surface
4k x 4k maximum
4x Single link DVI or analog RGB outputs
To 165Mpixels/s
Output Screens Resolutions
Up to 2.5Mpixel (maximum 2048 pixels in either direction
Arbitrary Up Scaling
64x original surface area
Firmware Support
Updates supported via USB
MTBF
50,000hrs
Warranty
1 year on both models
Code
Description
XV-X4-1RU
XV-X4 in 1RU Rack-mount version
XV-X4
XV-X4 in desktop version
CONFIGURABLE CONTROLLERS XV-VIS800 A choice of three controllers, each providing increased CPU and Memory configurations for demanding applications. All controllers can be populated with display output or input option modules to provide custom configurations, controllers can be linked to expansion frames to provide increased number of slots for larger video wall display solutions. The X-View XV-VIS800 wall controller brings increased performance based on Intel Core Quad 2 Processor providing performance coupled with extreme flexibility. The XV-VIS800 is the base model controller which can be used in conjunction with XV-VIS800X expansion frames to provide a maximum of 25 available slots in any one configuration..
FEATURES • • • • • • •
Core Quad2 Industrial PC with 9 PCIe slots SBC1 - Intel Core Quad 2CPU PICMG1.3 SBC 1 to 40 Display channels using the XV-IMG4 graphics card 1 to 25 SD-SDI/HD-SDI/3G-SD capture channels using the XV-SDI2 capture cards 1 to 32 RGB/HD/DVI/ capture channels using the XV-RGB-E1S/E2S capture cards Expand with 1 or 2 XV-VIS800X expansion chassis providing a maximum of 25 PCI express slots Compatible with X-View Wall Control & X-View Sequence / Schedule Applications
SPECIFICATIONS Physical Dimensions (approx)
(L x H x W) 500mm (Inc. Handles) x 177mm x 481mm (including mounting brackets) - 4RU 19”
CPU
SBC1 - Core Quad 2 CPU PICMG1.3 SBC with VGA, dual Gigabit LAN, SATA RAID USB2.0
Backplane
XV-EX9 1 x 8 Lane & 8 x 4 Lane PCIe Slots
RAM & Drives
4GB DDR2, 2 x 500GB SATA Hard Drives
Ethernet ports
2 x Gigabit Ethernet Ports
Control Screen output
1 x VGA
PSU options
500W Redundant or 600W ATX PSU
Cooling
Dual Front cooling fans with air filters
OS
Windows 7 64-Bit
Operating Temperature
0 to 35 Degrees C / 32 to 95 Degrees F
Firmware Support
Updates supported via USB
Warranty
1 year on both models
Code
Description
XV-VIS800-RPSU
With Redundant PSU
XV-VIS800-ATX
With single ATX PSU
CONFIGURABLE CONTROLLERS XV-VIS870 The X-View XV-VIS870 is a mid range controller based on Intel Core i7 processor for increased performance. The XV-VIS870 can be coupled with the XV-VIS800X expansion frames to provide 33 slots in any one configuration. The XV-VIS870 is ideal for IP camera systems when used with the X-View Render stations.
FEATURES • • • • • • •
Core i7 Industrial PC with 9 PCIe slots SBC2- Intel Core i7 2600 3.4GHz CPU PICMG1.3 SBC 1 to 48 Display channels using the XV-IMG4 graphics card 1 to 32 SD-SDI/HD-SDI/3G-SD capture channels using the XV-SDI2 capture cards 4 to 128 Video Inputs using XV-SD8 or XV-SD4+1 capture cards 1 to 32 RGB/HD/DVI/ capture channels using the XV-RGB-E1S/E2S capture cards Expand with 1 or 4 XV-VIS800X expansion chassis providing a maximum of 33 PCI express slots
• Compatible with X-View Wall Control & X-View Sequence / Schedule Applications
SPECIFICATIONS Physical Dimensions (approx)
(L x H x W) 500mm (Inc. Handles) x 177mm x 481mm (including mounting brackets) - 4RU 19”
CPU
SBC2 - Core i7 2600 3.4GHz CPU PICMG1.3 SBC with VGA, dual Gigabit LAN, SATA RAID USB2.0
Backplane
XV-EX9 1 x 8 Lane & 8 x 4 Lane PCIe Slots
RAM & Drives
8GB DDR2, 2 x 500GB SATA Hard Drives
Ethernet ports
2 x Gigabit Ethernet Ports
Control Screen output
1 x VGA
PSU options
500W Redundant or 600W ATX PSU
Cooling
Dual Front cooling fans with air filters
OS
Windows 7 64-Bit
Operating Temperature
0 to 35 Degrees C / 32 to 95 Degrees F
Firmware Support
Updates supported via USB
Warranty
1 year on both models
Code
Description
XV-VIS870-RPSU
With Redundant PSU
XV-VIS870-ATX
With single ATX PSU
CONFIGURABLE CONTROLLERS XV-VIS890
The XV-VIS890 is the top of the range controller based on Quad Core Xeon processors to deliver extreme performance levels for large video wall systems. The XV-VIS890 can be coupled with up to 5 XV-VIS800X expansion chassis to provide a staggering 49 slots in any one system configuration. This controller is also ideal for use with IP camera systems for large scale real time IP camera monitoring systems.
FEATURES • • • • • • • •
Core i7 Industrial PC with 9 PCIe slots SBC3- Dual Intel Quad Core Xeon EC5539 CPU PICMG1.3 SBC 1 to 64 Display channels using the XV-IMG4 graphics card 1 to 32 SD-SDI/HD-SDI/3G-SD capture channels using the XV-SDI2 capture cards 4 to 128 Video Inputs using XV-SD8 or XV-SD4+1 capture cards 1 to 32 RGB/HD/DVI/ capture channels using the XV-RGB-E1S/E2S capture cards Expand with 1 or 5 XV-VIS800X expansion chassis providing a maximum of 49 PCI express slots Compatible with X-View Wall Control & X-View Sequence / Schedule Applications
SPECIFICATIONS Physical Dimensions (approx)
(L x H x W) 500mm (Inc. Handles) x 177mm x 481mm (including mounting brackets) - 4RU 19”
CPU
SBC3- Dual Xeon EC5539 CPU PICMG1.3 SBC with VGA, dual Gigabit LAN, SATA RAID USB2.0
Backplane
XV-EX9 1 x 8 Lane & 8 x 4 Lane PCIe Slots
RAM & Drives
16GB DDR2, 2 x 500GB SATA Hard Drives
Ethernet ports
2 x Gigabit Ethernet Ports
Control Screen output
1 x VGA
PSU options
500W Redundant or 600W ATX PSU
Cooling
Dual Front cooling fans with air filters
OS
Windows 7 64-Bit
Operating Temperature
0 to 35 Degrees C / 32 to 95 Degrees F
Firmware Support
Updates supported via USB
Warranty
1 year on both models
Code
Description
XV-VIS890-RPSU
With Redundant PSU
XV-VIS890-ATX
With single ATX PSU
DISPLAY OUTPUT MODULE XV-IMG4
The X-View XV-IMG4 display output module provides 4 outputs per card, outputs can be DVI or VGA determined by choice of output cables. Multiple cards can be installed in a single system configuration and depending upon the controller used up to 64 display outputs can be configured. The XV-IMG4 allows mixture of display monitor sizes and resolutions as well as the ability to mix portrait and landscape display configurations.
SPECIFICATIONS Card Format
x4 Lane PCI express
Card Size
110mm x 197mm
Max output resolution
1920 x 1200 DVI or 2048 x 1536 VGA
Max number of cards per system
10 with XV-VIS800 to 16 with XV-VIS890
Frame buffer memory
2 x 256MB (512MB Total)
Max current at + 3.3V
0.25A
Max current at + 12V
1.7A
Max power
15 Watts
Operating Temperature
0 to 35 Degrees C / 32 to 96 Degrees F
Storage Temperature
-20 to 70 Degrees C / -4 to 158 Degrees F
Relative Humidity
5% to 90% non-condensing
MTBF
88,293 Hrs
Warranty
1 year
Code
Description
XV-IMG4-DVI
With DVI Outputs
XV-IMG4-VGA
With VGA Outputs
INPUT MODULE XV-RGB-E1S The XV-RGB-E1S input module provides a single channel input for DVI, VGA, RGB, YUV, HDMI sources and supports 1920 x 1080 in DVI or 2048 x 1536 VGA input resolutions. Note: HDMI does not support audio or HDCP.
SPECIFICATIONS Card Format
PCI-e x4 low profile card, 68.9mm x 167.6mm. PCI-e bus master with scatter gather DMA providing. maximum data rate of 650MB/s.
Connectors
One DVI-I type connector.
Max Sample Rate
170Mpixels per second analog RGB or 165 MHz DVI. Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling.
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video Capture Memory
32 MB, triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536, custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and custom modes
HD Modes
1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. YUV: 4:2:2. MONO: 8bit.
Video Format Options
Analog RGB plus HSync and VSync (5 wire). Analog RGB with Composite Sync (4 wire). Analog RGB with Sync on Green/YPbPr (3 wire). DVI Single Link.
Power Requirements
Max current at +3.3V – 0.25A. Max current at +12V – 0.5A. Max power – 6.8 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 Year
Code
Description
XV-RGB-E1S
1 x DVI/VGA/RGB/YUV/HDMI Input
INPUT MODULE XV-RGB-E2S The XV-RGB-E2S input module provides two channels of input for DVI, VGA, RGB, YUV, HDMI sources and supports 1920 x 1080 in DVI or 2048 x 1536 VGA input resolutions. Note: HDMI does not support audio or HDCP.
SPECIFICATIONS Card Format
PCI-e x4 low profile card, 110mm x 170mm. PCI-e bus master with scatter gather DMA providing. maximum data rate of 650MB/s.
Connectors
Two DVI-I type connector.
Max Sample Rate
170Mpixels per second analog RGB or 165 MHz DVI. Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling.
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video Capture Memory
64 MB, triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536, custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and custom modes
HD Modes
1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. YUV: 4:2:2. MONO: 8bit.
Video Format Options
Analog RGB plus HSync and VSync (5 wire). Analog RGB with Composite Sync (4 wire). Analog RGB with Sync on Green/YPbPr (3 wire). DVI Single Link.
Power Requirements
Max current at +3.3V – 0.25A. Max current at +12V – 1.2A. Max power – 15Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 Year
Code
Description
XV-RGB-E2S
2 x DVI/VGA/RGB/YUV/HDMI Input
INPUT MODULE XV-DVI-DL The XV-RGB-E2S input module provides one channel of input for DVI Single or Dual Link sources and supports 4K x 4K in DVI DL input resolutions. XV-DVI-DL allows for Quad-HD Digital Cinema inputs at 24/25/30 fps. Suitable for advanced medical, machine vision, radar and military device inputs.
SPECIFICATIONS Card Format
PCI-e x4 half size plug-in card, 110mm x 170mm. PCI-e bus master with scatter gather DMA
Connectors
One Dual Link DVI-D connector.
Maximum Sample Rate
330 MHz DVI - Capable of Quad HD at 24/25/30fps
Video Capture Memory
128 MB, triple buffered.
DVI-Dual-Link
Single Link and Dual Link modes auto detected.
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. YUV: 4:2:2. MONO: 8bit.
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. YUV: 4:2:2. MONO: 8bit.
Update Rate
User defined, captured frame rate will match the source.Providing max data rate (650MB/s) is not exceeded. Multi-buffered to eliminate tearing artefacts.
Video Format Options
DVI Dual-Link. DVI Single-Link.
Power Requirements
Max current at +3.3V – 0.2A. Max current at +12V – 0.9A. Max power – 12 W
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 year
Code
Description
XV-DVI-DL
1 x DVI Dual Ink Input
INPUT MODULE XV-SD4+1S The XV-SD$+1S provides five inputs on one module, 4 SD composite video and 1 x DVI/VGA/RGB/YUV/ HDMI input. Note: HDMI audio and HDCP is not supported.
SPECIFICATIONS Card Format
PCI-e x4 plug-in card, 110mm x 204mm. PCI-e bus master with scatter gather DMA
Connectors
One DVI-I type connector and one D connector for SD inputs
Maximum Sample Rate
650MB/s
Video Capture Memory
64MB, triple buffered.
SD Maximum Resolution
720x576x16bit
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536, custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and custom modes.
HD Modes
1080p, 1080i, 720p, 576p, 576i, 480p and 480i using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Video Format Options
Analog RGB plus HSync and VSync (5 wire). Analog RGB with Composite Sync (4 wire). Analog RGB with Sync on Green/YPbPr (3 wire). DVI Single Link. PAL, NTSC, SECAM in composite or S-Video format for SD inputs
Power Requirements
Max current at +3.3V – 0.25A. Max current at +12V – 1.2A. Max power – 15 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 year
Code
Description
XV-SD4+1
1 x DVI/VGA/ HDMI Input & 4 CV Inputs
INPUT MODULE XV-SD8 The XV-SD8 provides 8 composite video or YC video inputs on one module, the composite video inputs can be enabled for loop through mode or 75R terminated input mode. Video inputs can be PAL, NTSC or SECAM on any input.
SPECIFICATIONS Card Format
PCI-e x4 half size plug-in card, 110mm x 170mm. PCI-e bus master with scatter gather DMA
Connectors
Two D connectors for SD inputs.
Maximum Sample Rate
8 x 720x576x16bit.
Video Capture Memory
32 MB, triple buffered.
Video Format Options
PAL, NTSC, SECAM or S-Video.
Power Requirements
Max current at +3.3V – 0.25A. Max current at +12V – 0.6A. Max power – 8 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 year
Code
Description
XV-SD8
8 x CV or YC Inputs with Loop Through
INPUT MODULE XV-SDI2 The XV-SDI2 provides two channels of SD-SDI, HD-SDI and 3G-SDI with loop through on each input. Inputs and loop through connections are via BNC connections. The XV-SDI2 also supports 2K Digital Cinema mode inputs.
SPECIFICATIONS Card Format
PCI-e x4 half size plug-in card, 110mm x 170mm. PCI-e bus master with scatter gather DMA
Connectors
4 BNC connectors for SDI Inputs and Outputs.
Maximum Sample Rate
2 x 2048x1556 at 24fps, 2 x 1920x1080 at 60fps.
Video Capture Memory
64 MB, triple buffered.
Maximum SDI Rate
3Gb/s.
Video Modes
SD-SDI (480i/576i), HD-SDI(up to 1080i), 3G-SDI(up to 1080P), 2K Digital Cinema Modes
Power Requirements
Max current at +3.3V – 0.45A. Max current at +12V – 0.85A. Max power – 12 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 year
Code
Description
XV-SDI2
2 x SDI Inputs with Loop Through SD/HD/3G SDI
INPUT MODULE XV-AV The XV-AV provides two channels of inputs, one DVI, VGA, YUV, RGB, HDMI and one Composite Video. The XV-AV is available in three card versions which can include audio capture.
SPECIFICATIONS Card Format
PCI-Express x4 low profile card, 68.9mm x 167.6mm
Connectors
DVI-I , RCA (female)
Connectors (Audio board)
HD15 (male) for connection of supplied Audio Breakout cable: • Stereo line in (2 x RCA), stereo balanced in (2 x XLR), stereo line out (2 x RCA) • 16-way header for connection to main board
HDMI Capture
• Supports HDMI 1.3 to 225MHz (including deep colour modes). For HDCP support, contact the Sales Dept at e-mediavision for more information • HDMI audio can be selected as source for audio streaming. *
DVI Capture
Supports DVI 1.0 RGB 24bit capture to 165MHz. Incorporates TMDS equalizer to support up to 20m cables
VGA / YPbPr Capture
Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8 bits per colour. 5-wire, 4-wire or sync-on-green signal formats.
Composite Video Capture
CCIR601 sampling. PAL, NTSC, SECAM formats automatically detected
Audio Capture
Stereo Line-In/Stereo balanced inputs with programmable gain (+/-12dB), 16 bit sampling at 44.1/48/96kHz. Analog stereo line-out for direct pass through of selected input at up to 64kHz sampling, sourced from Analog input or HDMI channel
Video Capture Memory
256MB high bandwidth frame buffer supports triple buffering of HD and SD video. Local storage of complex scatter-gather tables for DMA engine (eliminates read over- head)
Video Processing
Polyphase FIR scaling engine (7x5) for hardware downscaling and upscaling. Colour space conversion allows captured data to be transferred in any format: RGB 16 bit (5-5-5, 5-6-5), 24 bit (8-8-8) or 32 bit (8-8-8-alpha), YUV 16 bit (4:2:2), Mono: 8bit
DMA Engine
Direct DMA to physical or virtual memory buffers with full scatter-gather support. DMA bandwidth : up to 800MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters
Power Requirements
Max current at 12V – 0.5A Max current at 3.3V – 0.2A Thermal dissipation – 6.5W
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 year Code
Description
XV-AV/F
Capture card with Audio Module FULL HEIGHT
XV-AV/H
Capture card with Audio module HALF HEIGHT
XV-AV/B
Capture card without audio Full & Half Height Mounts supplied
IP DECODER XV-RS870 The XV-RS870 render station enables the decoding of multiple IP video camera streams for display onto the video wall. The XV-RS870 is available in 3 configurations depending upon the number of IP streams to be decoded. The XV-RS870 outputs interface to the XV-RGB-E1S/E2S or DVI-DL.
SPECIFICATIONS Physical Dimensions (approx)
(L x H x W) 500mm (Inc. Handles) x 177mm x 481mm (including mounting brackets) - 4RU 19”
CPU 1, 2 or 3 depending on model
SBC2 - Core i7 2600 3.4GHz CPU PICMG1.3 SBC with VGA, dual Gigabit LAN, SATA RAID USB2.0
USB
4 x USB 2.0 ports through backplane
RAM per CPU
8GB DDR2
Ethernet ports
2 x Gigabit Ethernet Ports per CPU
Graphics 1,2 or 3 NVIDIA NVS300
Dual DVI per card
PSU
600W ATX PSU
Cooling
Dual Front cooling fans with air filters
Operating Temperature
0 to 35 Degrees C / 32 to 95 Degrees F
Weight
19 to 25Kg (shipping 30 to 33Kg)
Warranty
1 year on both models
Code
Description
XV-RS870-1
IP Render station 1 processor -up to 16 decode channels
XV-RS870-2
IP Render station 2 processors -up to 32 decode channels
XV-RS870-3
IP Render station 3 processors -up to 48 decode channels
DISTRIBUTOR XV-DL8 The X-View XV-DL8 is an eight output distribution amplifier for ultra-high resolution Dual Link DVI signals, The XV-DL8 can be used with the XV-X4 for system expansion or with any of the X-View controllers to enable larger wall display applications such as TV studio video walls where all displays are vertically synchronised.
SPECIFICATIONS Physical Dimensions
19”-Rack mount (1U) (438mm x 40mm x 172 mm)
Input Connectors
DVI-D (Dual Link) USB (Type B) for host communications IEC mains power inlet
Output Connectors
8 x DVI-D (Dual Link)
Front panel controls
Push button for EDID sampling Three LED indicator lamps (Power/Input/Status) and flashing feedback for USB communications or EDID button press.
Input Capabilities
Incorporates TMDS re-clocking equalizer to support up to 20m cables(1) Programmable EDID to indicate preferred mode No limit to aspect ratios or frame rates of DVI signals that can be accepted, provided they remain within the Dual-Link 330MHz specification Input is not HDCP compatible
Output Capabilities
Supports up to 5m cables into standard DVI receiver(2)
USB Connection
Supports USB 2.0 for programming of input EDID parameters using X-View dL8 Control application Operating system support: Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.
Power Requirements
Universal power supply (100-240V). 25W maximum(1)
Operating Temperature
0 to 35 deg C / 32 to 96 deg F Internal Fan Cooling
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
1 year Code
Description
XV-DL8
1 x DVI-Dual Link Input 8 x DVI Dual Link Outputs
CREATIVE VIDEO WALLS WITH XV-DL8 & XV-X4 Designing eye catching video walls with XV-DL8 and XV-X4 is simple and straight forward, mixture of displays in portrait or landscape formats allows for creative video wall designs.
XV- SEQUENCE & SCHEDULER X-View Sequence and Scheduler application enables a list of custom Layout files to be rotated in a set sequence. The Sequences can be loaded into a timed schedule for maximum flexibility. Ideal for automated control room, reception or mall display video wall applications.
CUSTOM LAYOUT FILES
X-VIEW SCHEDULER TIMED LAYOUT CHANGES
AUTOMATED VIDEO WALL LAYOUT CHANGES
Code
Description
XV-SEQ/SCH
Sequence and scheduler application
XV- WALL CONTROL X-View Wall Control application provides users with a simple interface to control any video wall display with ease. A simple drag and drop of any input onto any output in real time, input windows can be positioned, scaled and cropped to create custom layout files. With Wall Control an unlimited number of layouts can be created and recalled at a click of a button. The Wall Control client can be installed onto PC’s connected on the LAN network to allow easy remote control from any networked location, remote users can also view a video preview of the content currently being displayed on the video wall. Best of all, X-View Wall Control is licensed on a per frame basis allowing multiple control points to be added without additional cost.
ONE LICENSE MULTIPLE USERS
X-VIEW
VIDEO WALL LOCAL CONTROL WALL CONTROL CLIENT
REMOTE LAN CONTROL
Code
Description
XV-WALL-CTL
Wall Control Application
e-mediavision Ltd 19 Park Avenue Hounslow Middlesex LONDON U.K. TW3 2NA
[email protected] Tel: +44(0)20 8755 2014 www.e-mediavision.com X-VIEW is manufactured in the U.K. and distributed by e-mediavision’s approved dealers and systems integrators around the world. All specifications are subject to change without notice. X-View and E-mediavision.com Logos are trademarks of e-mediavision Ltd and may not be copied or reproduced without written approval.
LOCAL REPRESENTATIVE
