Transcript
R F
C o m p o n e n t s July 2015
Multilayer Diplexer For 2300-2500MHz / 4900-5950MHz
DPX205950DT-9008A1 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
RF Components
Multilayer Diplexer
Conformity to RoHS Directive
For 2300-2500MHz / 4900-5950MHz
DPX205950DT-9008A1 SHAPES AND DIMENSIONS 2.00±0.15
[Top view]
0.95±0.10
(5)
(4)
(1)
(2)
(3) Marking
1.25±0.15
(6)
0.65±0.20
0.30±0.20
Terminal functions 1 GND 2 Common 3 GND 4 High-band 5 GND 6 Low-band
0.25±0.20
[Bottom view]
0.20±0.20
0.35±0.20
Dimensions in mm
RECOMMENDED LAND PATTERN 0.30
EVALUATION BOARD 3.40
0.35
1.40 0.35
ø0.3 Through-hole
0.80 0.60
0.932
0.80
0.60
Dimensions in mm
1.00
0.80
0.60
0.60
0.80
0.30
0.15
0.50
0.594
0.932 Land
3.032 Solder resist
Dimensions in mm
Line width should be designed to match 50Ω characteristic impedance, depending on PCB material and thickness.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
• All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20150701 / rf_dpx_dpx205950dt-9008a1_en.fm
RF Components
DPX205950DT-9008A1 ELECTRICAL CHARACTERISTICS LOW-BAND Frequency Range (MHz)
Min.
Typ.
Max.
2300 to 2500 2300 to 2500 2400 to 2500 4600 to 5000 6900 to 7500
— — 10 20 20
0.37 — 16.4 22.3 29.7 50 (Nominal)
0.65 0.80 (–40 to +85°C) — — —
Frequency Range (MHz)
Min.
Typ.
Max.
4900 to 5950 4900 to 5950 4900 to 5950 2300 to 2500 9800 to 11900
— — 9 20 13
1.03 — 11.4 26.2 18.8 50 (Nominal)
1.40 1.60 (–40 to +85°C) — — —
Item
Frequency Range (MHz)
Min.
Typ.
Max.
Return Loss (dB)
2300 to 2500 4900 to 5950
10 9
15.4 13.0 50 (Nominal)
— —
Item Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance (:) ・Ta: +25±5°C
HIGH-BAND Item Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance (:) ・Ta: +25±5°C
COMMON
Characteristic Impedance (:) ・Ta: +25±5°C
TEMPERATURE RANGE Operating temperature （°C） –40 to +85
Storage temperature （°C） –40 to +85
• All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20150701 / rf_dpx_dpx205950dt-9008a1_en.fm
RF Components
DPX205950DT-9008A1 FREQUENCY CHARACTERISTICS HIGH-BAND Insertion Loss
0.0
0.0
0.5
0.5
1.0
1.0
Insertion Loss(dB)
Insertion Loss(dB)
LOW-BAND Insertion Loss
1.5
2.0
2.5
2000
2500 Frequency (MHz)
3000
3.0 4000
3500
Return Loss
0
10
10
20
30
5000
5500 Frequency (MHz)
6000
6500
7000
4500
5000
5500 Frequency (MHz)
6000
6500
7000
20
30
40
40
50 1500
2000
2500 Frequency (MHz)
3000
50 4000
3500
Attenuation
Attenuation 0
10
10
Attenuation (dB)
0
20
30
40
50
4500
Return Loss
0
Return Loss(dB)
Return Loss (dB)
2.0
2.5
3.0 1500
Attenuation (dB)
1.5
20
30
40
2000
4000
6000 8000 Frequency (MHz)
10000
12000
50
2000
4000
6000 8000 Frequency (MHz)
10000
12000
• All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20150701 / rf_dpx_dpx205950dt-9008a1_en.fm
RF Components
DPX205950DT-9008A1 FREQUENCY CHARACTERISTICS Isolation
0
0
10
10
20
20
Isolation (dB)
Return Loss (dB)
COMMON Return Loss
30
40
50
30
40
2000
4000
6000 8000 Frequency (MHz)
10000
12000
50
2000
4000
6000 8000 Frequency (MHz)
10000
12000
• All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20150701 / rf_dpx_dpx205950dt-9008a1_en.fm
RF Components
DPX205950DT-9008A1 RECOMMENDED REFLOW PROFILE Soaking
Working Soldering Peak
T: Temperature
T4
T5
T3
T2
T4 T3
t3
T1 t1
t2
t: Time
Soaking Temp. T1 150°C
T2 180°C
Time t1 60 to 120s
Working Temp. T3 230°C
Time t2 more than 30s
Soldering Peak Temp. T4 247 to 253°C
Time t3 within 10s
Temp. T5 260°C max.
• All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20150701 / rf_dpx_dpx205950dt-9008a1_en.fm
RF Components
REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this catalog. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment
(8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications
When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/ equipment or providing backup circuits, etc., to ensure higher safety.
• All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20150701 / rf_dpx_dpx205950dt-9008a1_en.fm
