Transcript
Ceramic Balun
RF Transformer 75Ω
TCN1-152-75+
950 to 1450 MHz
Maximum Ratings Operating Temperature
-40°C to 85°C
Storage Temperature
-55°C to 100°C
Input RF Power***
3W
*** Derate linearly to 2.5W at 100°C Permanent damage may occur if any of these limits are exceeded.
Pad Connections
PRIMARY DOT (Unbalanced Port)
5
PRIMARY (GND)
4,6
SECONDARY DOT (Balanced)
3
SECONDARY (Balanced)
1
NO CONNECTION
2
Features
CASE STYLE: FV1206-1
• wideband, 950 to 1450 MHz • low phase unbalance, 3 deg. typ. • miniature size, 0.12"x.06"x.037" • LTCC construction • low cost • aqueous washable
+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
Applications
and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000
Reel Size 7”
• Cable TV
Electrical Specifications (TAMB=25°C)
Pads 1,3,4,6 are DC-connected internally
Outline Drawing
Ω RATIO
FREQUENCY (MHz)
INSERTION* LOSS (dB)
PHASE UNBALANCE† (Deg.) Typ.
AMPLITUDE UNBALANCE (dB) Typ.
1
950-1450
1.0
3
1.0
(ON TOP)
* Insertion Loss is referenced to mid-band loss, 0.8 dB. Reference Demo Board TB-417+ † Relative to 180°
(ON TOP)
Typical Performance Data at 25ºC** FREQUENCY (MHz)
Outline Dimensions ( inch mm ) A .126 3.20
B .063 1.60
C .035 0.89
D .024 0.61
G .039 0.99
H .024 0.61
J .042 1.07
K .123 3.12
E .022 0.56
F .011 0.28 wt grams .020
AMPLITUDE UNBALANCE (dB)
PHASE UNBALANCE (Deg.)
16.40 19.14 21.78 22.90 22.65
1.10 6.63 1.04 6.10 0.98 5.32 0.92 4.67 0.89 4.33
1200.00 1300.00 1350.00 1400.00 1450.00
19.87 16.67 15.40 14.44 13.59
0.84 0.75 0.72 0.68 0.65
0.04 0.12 0.17 0.22 0.26
2.91 1.10 0.24 0.79 1.66
** Measured with Agilent E5071B network analyzer using impedance conversion and port extension. TCN1-152-75+ TCN1-152-75+ AMPLITUDE UNBALANCE INSERTION LOSS 1.2 0.40
Demo Board MCL P/N: TB-417+ Suggested PCB Layout (PL-265)
AMPLITUDE UNBALANCE (dB)
Suggested Layout, Tolerance to be within ±.002
INPUT R. LOSS (dB)
950.00 0.07 1000.00 0.02 1050.00 0.00 1100.00 0.00 1120.00 0.01
INSERTION LOSS (dB)
PCB Land Pattern
INSERTION LOSS (dB)
0.30 0.20 0.10 0.00 950
1050
1150 1250 FREQUENCY (MHz)
1350
1450
1.1 1.0 0.9 0.8 0.7 0.6 950
1050
1150 1250 FREQUENCY (MHz)
1350
1450
TCN1-152-75+ PHASE UNBALANCE PHASE UNBALANCE (Deg)
7.0 6.0
configuration J
5.0 4.0
NO CONNECTION
PRI
3.0
*
2.0 1.0 0.0 950
SEC
*Internal Open Circuit 1050
1150 1250 FREQUENCY (MHz)
1350
1450
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
REV. C M151107 TCN1-152-75+ ED-12817/34B3 RS/AM 151008
