Rfid Hf Long Range

Transcript

DATATRONIC IDentsysteme RFID Catalogue www.datatronic.eu Version D / 2009 DATATRONIC IDentsysteme www.datatronic.eu Inhaltsverzeichnis / Table of Contents S Shhoorrtt R Raannggee TagTrans 3 BlueTank 9 FixScan 10 AccessScan 11 CardReader 12 M Meeddiiuum mR Raannggee Medium Range 2D Antenna 13 Midrange 3D Antenna A4 13 Midrange 3D Antenna A3 13 Midrange 3D Antenna A4 13 LLoonngg R Raannggee Indoor Long Range 3D Antenna Outdoor Long Range 3D Antenna 14 14 Long Range 3D Antenna 14 Long Range 3D Antenna 15 Long Range OEM read / write electronic 15 Guard 16 Special housing for 150 x 60cm antennas 16 U UH HFF logident UDL500 Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] 17 Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. www.datatronic.eu Bluetooth Class1, up to 100 m RFID & Barcode 2D Imager Bluetooth 2.0 + EDR UHF, HF, LF LED Indicators, Piezo Buzzer Optional ATEX approved Intrinsically Safe Optional Cable Version IP67 – Rugged and Encapsulated USB or RS232 Interface Housing with Shock Absorbers Longlife Battery Pack Trigger ON/OFF Motion Sensor – Low Power Consumption TagTrans® – Dome- and Flexi Versions TagTransPromoE03 TagTrans® The Multi Frequency RFID Read/Write-Device with Industrial TagTrans® – Exceptional Features TagTrans® is a new way of data collection. It has an integrated RFID and Barcode scanner and a powerful Bluetooth interface. TagTrans® connects to Handhelds, PCs, Laptops und even Mobile Telephones. TagTrans® is an easy way to make your handheld to a RFID reader (writer), using this f­ eature it saves money. No need to buy expensive and high integrated PDTs. You get full flexibility in reading with no extra costs because you could use your standard hand held computers and terminals and read RFID. The RFID module supports most common ISO 18000 RFID technologies (such UHF, ISO 15693, ISO 14333 Mifare, LF, ISO animal, etc… mm RFID: MultiTag support for UHF (868, 926 MHz) or HF (13,56 MHz) or LF (125 / 134 kHz) mm mm mm mm mm mm mm mm mm mm mm mm mm mm B arcode scanner: 2D imager for all barcodes and 2D barcodes Bluetooth Class1 up to 100m, Bluetooth 2.0 with ERD Powerful micro processor, flexible protocol converter Housing robust design industrial, glass fibre enforced, rugged modular design IP67, encapsulated housing Sealing rings, shock absorbers, roll away protection Compact powerful battery pack LiIon 4500 mAh FlexiScan Version with flexible antennas Optional ATEX approved intrinsically safe ATEX E EX nL IIC T6 LEDs for power and communication, Piezo Beeper ON/OFF motion sensor for low power consumption, no trigger Cable version with USB or RS232 interface Optional wrist strap, pistol grip or magnet holder Cradle with car battery charger mm Lowest price for best technical features TagTrans® Flexi Version for difficult Applications DATATRONIC IDentsysteme www.datatronic.eu S Shhoorrtt R Raannggee TagTrans® contact- and wireless Identification Read/Write Electronic for RFID Transponders with Bluetooth Interface RFID identification system for UHF, HF and LF Transponders. The RFID Read/Write device is mainly used as a hand held reader to identify objects, like cans, beer kegs, pressure cylinders,…and persons or live stock. The Bluetooth Technology realises a contact less – wireless operation. Best example is a Mobile Computer in the driver’s cabinet connected wireless to the TagTrans reading milk cans or gas bottles around a truck. Or it is used as a fixed device for applications in the factory automation, access control, etc.  ATEX Low power consumption, power management utility for integrated batteries   integrated front side antenna  Operating Temperature -20C to +85C Storage Temperature -40C to +85     CE option : EX nL IIC T6 reading distance from touch up to 100 mm, depending on HF or LF transponder type, with UHF transponders up to 600 mm Communication protocol ASCII or Binary Communication Interface serial RS232 via BT Transparent mode, RoHS compliant  Easy to handle, robust body, highest protection against dust and submerge under water, IP68   Industrial Bluetooth Class 1, Bluetooth 2.0 + EDR module  Beeper, LED indicators for Power, Signal, Communication Control  Made for work outside, industrial areas, rough environment, on vehicles, metal pressure cylinders…  Compact design, small size: 49 mm  x 225 mm Connection to PDA's, PCs, Mobile Computers with Bluetooth USB Stick, CF, SD, PC Cards or integrated Bluetooth (Mobile Phones) Ordering Information TagTrans: x) supported transponders see next page Produkt / product TagTrans–UHF TagTrans–HF TagTrans–LF TagTrans® Beschreibung / description MultiTag Read/Write electronic for ISO 18000-6C, EPC Class1 Gen2 (UCODE G2XM, G2XL, etc…) MultiTag Read/Write electronic for ISO 15693, ISO 14443 A/B, (I-Code, Tag-it, My-D, etc…) MultiTag Read/Write electronic for 125 / 134 kHz and ISO-Animal Tags Read/Write electronic Gem+ Series 210 and 240 Tags TagTrans–Gem+ FlexiScan® and TagTrans® Ordering Information for the enhanced option FlexiScan: Produkt / product FlexiScan – HF –1, /-10, / -36 FlexiScan – LF – 1, /-10, / -36 FlexiScan - Gem+ -1, /-10, /-36 FlexiScan Beschreibung / description MultiTag Read/Write electronic for ISO 15693, ISO 14443 A/B, (I-Code, Tag-it, My-D, etc…) with flexible extension (metal hose) of 1, 10, 36 cm length (others on request) MultiTag Read/Write electronic for 125 / 134 kHz and ISO-Animal Tags with flexible extension (metal hose) of 1, 10, 36 cm length (others on request) Read/Write electronic Gem+ Series 210 and 240 Tags with flexible extension (metal hose) of 1, 10, 36 cm length (others on request) Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu Ordering Information for Accessories: Accessories for TagTrans® and FlexiScan Beschreibung / description Bluetooth USB Adapter 2.0 + EDR Bt200 Produkt / product USB BT Stick Cradle Cradle with power supply Supported Transponders / Micro Engine RFID Modules (Read/Write) UHF 860 – 960 MHz RF Transmit Frequency 865 – 868 MHz (EU), 902 – 928 MHz (USA), 952 – 954 MHz (JP) Supported Standards UHF ISO 18000 – 6C, EPC Class1 Gen2 Supported Tag-ICs for UHF UCODE G2XM UCODE G2XL, and compatible ISO… HF 13.56 MHz Multi ISO / Mifare Easy / Wiegand Mifare Easy RF Transmit Frequency 13.56MHz Supported Standards HF ISO14443A, ISO14443B, ISO 15693, ISO 18000-3, NFC enabled, I-CODE Supported Tag-ICs for HF Multi ISO Mifare® Standard Mifare® 4k Mifare® Pro Mifare® Ultralight Mifare® DESFIRE Mifare® SmartMX I-CODE SLI (SL2 ICS 20) I-CODE EPC (SL2 ICS 10) I-CODE UID (SL2 ICS 11) I-CODE NFC (Reader To Tag Mode) SLE 55Rxx SRF55VxxP+S SLE 66CL160S SLE 66CLX320P SR176 SRIX4K LRI 64 LRI 512 EM4135 KSW Temp Sens® Tag-it™ HF-I Standard Tag-it™ HF-I Pro Jewel Tag Sharp B ASK GTML ASK GTML2ISO TOSMART P032/P064 ISO14443A Tags ISO14443B Tags ISO15693 Tags ISO18000-3 Tags TI-RFID Systems 134.2 kHz: 64Bit R/O 64Bit R/W 1088Bit Multipage HF 13.56 MHz RF Transmit Frequency 13.56MHz Supported Tag-ICs Gem+ / Tag-Sys, ARIO 10/210, ARIO 40/240 For HF 13,56 MHz LF 125/134 kH Multi Tag RF Transmit Frequency 125 kHz, 134,2 kHz Supported Standards LF ISO 11784, ISO 11785, ISO 18000-2 Supported Tag-ICs for LF Multi ISO Hitag 1 Hitag 2 Hitag S Q5 EM4X02 EM4X05 (ISO FDX B) EM4X50 Bluetooth Module WT11 - Class 1 Bluetooth® EDR Module Key Features         Bluetooth Class 1 Two antenna options: internal chip antenna or U.FL connector Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence 8Mb of flash memory Supported Bluetooth profiles: SPP, HFP, HFP-AG, OBEX OPP and DUN, + HCI Simple iWRAP™ firmware for controlling Bluetooth wireless technology Fully qualified end product Bluetooth 2.0+ EDR, CE, FCC and IC Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme Decoder UHF B a rc o d e 2 D Ima ge r BC2 In te rfa c e Blue too th Ca ble USB ca b le RS232 R e a d e rhe a d Dome Reading Cap Flat reading Cap TT - HF1 - RS232 - F TT - HF1 - BT - FS36 - EX TT - HF1 - BC2 - BT - F best for Your application ??? many more variatons ..... HF2 Re a d/W rite e le ctro nic Ge m+ Serie s 210 a nd 240 T ag s MultiT ag Re ad /W rite e lectronic for ISO 18000-6C, EPC Cla ss1 Ge n2 (UCODE G2XM, G2XL, e tc…) TT - HF1 - USB - F HF1 MultiT ag Re ad /W rite e lectronic for ISO ISO 14443 A/B W ieg and Inte rfa ce TT - UHF - BT - F LF MultiT ag Re ad /W rite e lectronic for ISO 15693, ISO 14443 A/B, (I-Cod e, T a g-it, My-D, e tc…) TT - LF - BT - D MultiT ag Re ad /W rite e lectronic for 125 / 134 kH z and ISO-Anima l T a gs TT - LF - BT - F TT TT - HF1 - BT - D T a g T ra n s TT - HF1 - BT - F Code Examples of possible versions *) Features www.datatronic.eu x x x x x x x x x x x x x x x x x x x HF3 BT USB RS232 D F x x x x x x x x x x x x x x x x x x x *) Selection Guide Please select one field for Decoder, Barcode, Interface, Read head or FlexiScan, ATEX. You may select whatever variation is good for your application Multiselection of Decoders is not available BARCODE 2D Imager SE4400/PL4407 - Scan Engine von Motorola  Decoding 1 D and 2D Barcodes  UPC/EAN, Code 128, UCC.EAN 128, RSS, Code 39, I 2/5, Discrete 2/5, Codabar, MSI  DataMatrix, Maxi Code, PDF 417, QR Code, Postal Code: U.S. Postnet, U.S. Planet, UK Postal, Australien Postal, Japan Postal  Reading Distance up to 55 cm with 25 mils Modul width  Image File Formats: BMP, TIFF, JPEG  Works in a wide range of ambient light  More details see Motorola datasheet Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. Passive Tag on Car/Truck Tank Fuel Filler Neck Bluetooth Class1, up to 100 m Integrated RFID Read/Write Electronic Refuel for Authorized Cars only Refuel Pump is Activated for Tags with Clearence only Bluetooth 2.0 + EDR BlueTankPromoE03 BlueTank® RFID secured Refuel System with Industrial BlueTank® – The RFID controlled Refuel System with Bluetooth Data Transfer BlueTank® allows refuel of trucks and cars only with predefined authorization and clearence. The system is based on RFID technology, contact less identification and contact less data transmission. A battery powered RFID read/write electronic is fixed on the nozzle and reads a passive tag on the fuel filler neck. The tag data are transmitted via Bluetooth interface to the tank station, the data are verified and clearence is given to the pump if the tag is authorized. The Bluetooth interface works up to 100 m and communicates with a computer system. Bluetooth works with standard Class1, Bluetooth 2.0 and EDR. Beside the main advantage to avoid unauthorized filling the system allows to register liters and when the car was refuelled. m RFID controlled refuelling of trucks, busses cars, construction machinery, etc.. m Most benefits for companies with many cars and own filling stations m Secured data communication with Bluetooth class 1, Bluetooth 2.0 + EDR m Certified for hazardous environment, intrinsically safe design m Fully automatic reports about refuelling events: who, when and how much Passive Tag on Car/Truck Tank Fuel Filler Neck DATATRONIC IDentsysteme www.datatronic.eu S Shhoorrtt R Raannggee FFiixxS Sccaann RFID Reader ▫ complete RFID read/write system with Integrated antenna ▫ watertight, IP67, low power consumption ▫ compact design, small size: 80x80x20 mm ▫ different interfaces ▫ reading distance up to 100 mm - depends on transponder type FixScan This unit is a fixed position Read/Write electronic with integrated antenna for RFID Transponders. You can choose between different interfaces. The housing in a compact design 80 x 80 x 20 mm (W x H x D) is easy to mount with hidden screws and rear or side cable exit . On the front side are two LEDS for power and reading control. The reader is convenient for industrial environment or on vehicles due the protection class IP67. FixScan FixScan FixScan side cable exit 13,56MHz for ISO 15693 and ISO 14443 Multi Tag 13,56MHz for Gem+ / Tagsys 210 and 240 Tag 125/134 kHz MultiTag FixScan FixScan FixScan rear cable exit 13,56MHz for ISO 15693 and ISO 14443 Multi Tag 13,56MHz for Gem+ / Tagsys 210 and 240 Tag 125/134 kHz MultiTag Cable Specifications Cable length 1,5m RS232 DB9 connector for PC Com Port, PS/2 Keyboard Power Adapter USB Interface add on price Flying leads Technical Specifications Technology 13,56 MHz for ISO 15693 and ISO 14443 Multi Tag, for Gem+/Tagsys 210 and 240 Tag 125 kHZ MultiTag Power consumption max. 150 mA at 12VDC Power supply 5 VDC, 12 VDC, 24 VDC Physical Characteristics Storage temperature: -30 °C to +70 °C Casing: Plastic, ABS, rubber seal ring Dimensions: 80 x 80 x 20 mm (W x D x H) Back Side Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu S Shhoorrtt R Raannggee A AcccceessssS Sccaann RFID Identification System    Easy to mount in an electrical light switch outlet Custom design versions for other electrical light switches  Easy retrofitting in existing installations  LED indicates if access is allowed (red/green)  Size: 80 x 80 x 35 mm  integrated antenna reading distance up to 10 cm, depends on transponder type A AcccceessssS Sccaann RFID Identification System for 125 kHz or 13,56 MHz Transponders, ISO 15693, ISO 14443, GEMWAVE, I-Code, Tag-it, EM, etc. The reader has exactly the size of an electrical outlet for light switches. In connection with the MiniCoder it is a complete Stand Alone access control system. AccessScan 13,56 MHz ISO 15693 and ISO 14443 Multi Tag, 12 VDC , 80 mA, RS232 interface, LED AccessScan 13,56 MHz I-Code and Tag-It transponders, 12 VDC , 80 mA, RS232 interface, LED AccessScan 13,56 MHz GemWave transponders, 12 VDC , 80 mA, RS232 interface, LED AccessScan 125 kHz transponders, 12 VDC , 80 mA, RS232 interface, LED Technical Specifications Technology 13,56 MHz for ISO 15693 and ISO 14443 Multi Tag, for Gem+ / Tagsys 210 and 240 Tag 125 kHz MultiTag RS 232 Interface 9600 baud (max 115,2 kbaud), 1 startbit, 8 databits, no parity, 1 stopbit, halfduplex Power consumption 80 mA at 12VDC Power supply 12 VDC (9-28 VDC ), max. 5% ripple Physical Characteristics Storage temperature: -10 °C to +70 °C Casing: Plastic Dimensions: 80 x 80 x 35 mm (W x H x D) Back Side Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu S Shhoorrtt R Raannggee C CaarrddR Reeaaddeerr RFID Reader ▫ Read/Write device for access control applications. ▫ 2 LEDs for power and reading control ▫ compact design ▫ low power consumption CardReader This unit is a complete RFID read/write system with slot for tags in ISO card size and second reading area for other sized tags on top of the housing. reading on top Card Reader (R/W) with RS232 Interface 13,56MHz for ISO 15693 13,56MHz for MIFARE ISO14443 A/B 13,56MHz for I-Code + Tag-it 13,56MHz for GemWave 125kHz / 134 kHz / EM, HITAG, Q5, etc... MultiTag USB Interface add on price with slot for ID Cards Card Reader (R/W) with RS232 Interface 13,56MHz for ISO 15693 13,56MHz for MIFARE ISO 14443 A/B 13,56MHz for I-Code + Tag-it 13,56MHz for GemWave 125kHz / 134 kHz / EM, HITAG, Q5, etc… MultiTag USB Interface add on price Technical Specifications Technology 13,56 MHz ISO 15693, I-Code,Gemplus, Tagit, Mifare 125 kHZ MultiTag (EM4001, EM4002, EM4003, EM4005, EM4050, EM4100, Sokymat Unique, Gemplus 100, Medget, Sokymat Titan, V4050, EM4150, Zoodiac, Hitag1, Hitag2) Power consumption max. 150 mA Power supply 5 VDC PS2 Adapter Physical Characteristics Storage temperature: -30 °C to +70 °C Dimensions: 127 x 84 x 22 mm Cable Specification Cable length: 2m USB Interface RS232 9-pin connector, 5 VDC PS21-keyboard power adapter with slot for ID Cards Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] reading on top Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu M Meeddiiuum mR Raannggee M Meeddiiuum mR Raannggee 22D DA Anntteennnnaa 296A AM34 SKIC LR34 Medium Range 2D antenna, 40 cm diameter round STARTERKIT Long Range Reader, MidRange antenna Software, Manuals, Set of I-Code labels M Miiddrraannggee 295R AT3S 33D DA Anntteennnnaa A A44 Midrange ScanGate: 3D antenna A4 including Autotuner (slave), in IP65 housing size 362 x 255 x 110 mm 33D DA Anntteennnnaa A A33 M Miiddrraannggee 296G AT3S Midrange ScanGate: 3D antenna A3 including Autotuner (slave), size 297 x 420 x 16 / 75 mm M Miiddrraannggee 295R AT3S Midrange ScanGate: 3D antenna A4 including Autotuner (slave), in IP65 housing size 210 x 297 x 16 / 75 mm Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] 33D DA Anntteennnnaa A A44 Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu LLoonngg R Raannggee LLoonngg R Raannggee O OEEM M rreeaadd // w wrriittee eelleeccttrroonniicc 297Y 9Y34 Long Range OEM read / write electronic Range up to 120 cm, RS232, RS485, 24 VDC, 2 x BNC for antenna, 4 x I/Os LLoonngg R Raannggee 297B AT3S 297B AT3M Long Range ScanGate 3D antenna 60 x 60 cm including Autotuner in IP65 housing, (Slave) Long Range ScanGate 3D antenna 60 x 60 cm including Autotuner, Power splitter, I/O control in IP65 housing, (Master) LLoonngg R Raannggee 297C AT3S 297C AT3M 33D DA Anntteennnnaa Long Range ScanGate: 3D antenna 60 x 150 cm including Autotuner in IP65 housing (Slave) Long Range ScanGate: 3D antenna 60 x 150 cm including Autotuner, Power splitter, I/O control in IP65 housing (Master) Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] 33D DA Anntteennnnaa Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu LLoonngg R Raannggee O Ouuttddoooorr LLoonngg R Raannggee 297Z AT3S 297Z AT3M Long Range ScanGate 3D antenna 60 x 175cm (with socket), including Autotuner in IP67 housing (Slave) Long Range ScanGate 3D antenna 60 x 175cm (with socket), including Autotuner, Power splitter, I/O control in IP67 housing, (Master) IInnddoooorr LLoonngg R Raannggee 297Z AT3S 297Z AT3M 33D DA Anntteennnnaa Long Range ScanGate 3D antenna 71 x 152cm, including Autotuner (Slave), Jousing available in different colours Long Range ScanGate 3D antenna 71 x 152cm, including Autotuner (Master), Power splitter, I/O control. housing, Jousing available in different colours Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] 33D DA Anntteennnnaa Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu LLoonngg R Raannggee SSppeecciiaall hhoouussiinngg ffoorr 115500 xx 6600ccm m aanntteennnnaass Robust fibre glass construction Distance between the antennas 90cm Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice. DATATRONIC IDentsysteme www.datatronic.eu U UH HFF llooggiiddeenntt U UH HFF U UD DLL550000 U UH HFF LLeesseerr  Easy Installation (no coax-cable or power measurement necessary)  Fully self-contained and compact  Integrated and factory tuned antennas for maximum range  Optimally calibrated transmitter power  Large LED display for user feed-back Plug & Play solution llooggiiddeenntt U UH HFF U UD DLL550000 The UDL500 is especially suited for the retail and logistics market for long range identification and high volume bulk reading of passive UHF transponders. The compact device has integrated antennas. ISO 18000-6 C and EPC transponder protocols are supported. Firmware can easily be flashed. This ensures that your investment will be long lasting and makes future innovations easy. Gate and other multiple reader applications can be easily achieved with the DCU1 Data Control Unit. Technical Data Operating Frequency 865-868 MHz (EU) oder 902-928 MHz (USA) Reading / Writing Range Up to 5m, depending on type of transponder and environmental conditions Radiated Transmit Power 2W ERP (ETSI EN 302 208), or 4W EIRP (FCC Part 15), configurable in 10 steps Transponder Protocols ISO 18000-6 C, EPCClass1 Gen 2 Optional: ATMEL ATA 5590, EM 4022, 4222, 4422 Trigger Input 8-36 VDC Digital Output 6-32 VDC: I<500mA 32-48 VDC: I<300mA Interface RS485 Anticollision Identification of several transponders in the antenna field Conformity Human exposure: EN50364 EMC EMV EN301 489 Air Interface (EU) EN 302 208 (LBT) EN 300 220 Optional Air Interface (US) FCC Part 15 Dimensions (mm) 640 x 280 x 75 Housing ABS/PMMA, silver Protection Class IP 65 Operating Temperature -20°C … +70°C Storing Temperature -40°C … +85°C Relative Humidity 5% … 95% non condensing Power Supply 10 – 30 VDC Power Consumption 10W (operation), 2W (Standby) Prices in € excl. VAT, excl. packing and transport DATATRONIC IDentsysteme GmbH Dreisteinstraße 47, AT 2372 Gießhübl Tel.: 0043 (0) 2236 / 377668-0, Fax: 0043 (0) 2236 / 377668-11 mailto: [email protected] Valid until cancelled Delivery, Payment Terms and Warranty as per AGB. The information contained in this document have been carefully checked and are believed to be accurate. However DATATATRONIC IDentsysteme GmbH. reserves the right to change or discontinue Information, products and prices without prior notice.