Preview only show first 10 pages with watermark. For full document please download

Rhrfspw

   EMBED


Share

Transcript

Select Engineered Systems, Inc. RADIO RECEIVER RHRFSPW GENERAL INFORMATION BUTTON SELECT The RHRFSPW is a 54 bit rolling code radio receiver for connection to an access control system. The code received is decrypted, then sent to the output terminals according the format and protocol selected on the internal dip-switches. These different outputs may be used with many access control systems. The button select switch matches the transmitter button pressed with the dip switch selected. The left button on the transmitter is button select 1 and the right button on the transmitter is button select 2. If both switches are enabled, then either button will produce an output. Button select 3 & 4 are used with the RTSP4 (4 button) transmitter. TECHNICAL SPECIFICATIONS Enable Power supply Power consumption Receiver type Reception frequency Frequency stability Receiver sensitivity Code received Operating temperature Dimensions Weight Output formats Disable : 12/24 Volts ac or dc : 30mA : Super-heterodyne : 433.920 MHz : +- 180 PPM : < 1.0 uV : 54 bits rolling code : -15C to +55C : 5.6” x 4.3” x 1.5” : 8 oz : Wiegand, RS232, data/clock OUTPUT FORMAT AND PROTOCOL 1 2 3 4 This figure shows button 1 enabled. OUTPUT LEVEL SELECT This jumper selects the output signals (Wiegand and Data Clock) to be 5V or 12V. 5 12 CONNECTIONS WIEGAND 26 Bit with site code 26 Bit with site code 0 37 Bit HID DATA/CLOCK RS232 D0 D1 COM EN 24 ac/dc + COM power supply 12 ac/dc + D0 Wiegand Data 0 Data/clock DATA 30 Bit special Standard ISO track 2, start sentinel + 16 digits + end sentinel 24 COM 12 + + D1 Wiegand Data 1 Data/clock CLOCK COM data common EN /enable ANT Antenna Standard ISO track 2, start sentinel + 16 digits + separator + end sentinel + LRC Button select Format and protocol 9600 Baud, 8 bit, no parity, 1 stop bit Output voltage select Connections FCC ID: ON3MRRE • 7991 West 26th Avenue • Hialeah, Florida 33016 1 (800) 342-5737 • (305) 823-5410 • Fax: (305) 823-5215 E mail [email protected] * web site www.selectses.com ANT RS232