Preview only show first 10 pages with watermark. For full document please download

Rid-85 Series

   EMBED


Share

Transcript

040-02-409-041-EH-0309.pdf 040-02-409-041-EH-0309 RID-85 85W Dual Output Switching Power Supply series Features : Isolated output & GND for CH1,CH2 Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RID-85A RID-85B OUTPUT NUMBER CH1 CH2 CH1 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 8A 4A 8A 2A 0.3 ~ 5A 2 ~ 10A 0.3 ~ 2.5A CURRENT RANGE Note.6 2 ~ 10A RATED POWER Note.6 88W CH2 88W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 80mVp-p CH1: 4.75 ~ 5.5V 2.0% 8.0% 120mVp-p 5.0% LINE REGULATION Note.4 0.5% 1.0% 0.5% 1.0% LOAD REGULATION Note.5 1.0% 3.0% 1.0% 5.0% SETUP, RISE TIME 500ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.5A/115VAC 1.5A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT 1200ms, 30ms/115VAC at full load 18ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 81% <2mA / 240VAC 110 ~ 150% rated output power OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY & EMC (Note 7) OTHERS SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2), heavy industry level, criteria A DIMENSION PACKING NOTE Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V 239.4Khrs min. MIL-HDBK-217F (25 159*97*38mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/0.7CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. File Name:RID-85-SPEC 2008-07-23 040-02-409-041-EH-0309.pdf 040-02-409-041-EH-0309 RID-85 85W Dual Output Switching Power Supply Mechanical Specification Case No. 901C series Unit:mm 3.5 7 152.5 1 3 84.5 8.2 4 5 6 2-M 97 65 9.5 2 3 7 3.5 4.5 78 24 159 6.5 150 22 Pin No. 1 2 3 4 38 3.5 M3 28.5 3.5 3- 18 18.5 9 9 Terminal Pin No. Assignment Assignment AC/L AC/N FG DC OUTPUT G2 Assignment Pin No. DC OUTPUT +V2 5 DC OUTPUT G1 6 DC OUTPUT +V1 7 117 Block Diagram fosc : 60KHz RECTIFIERS & FILTER EMI FILTER I/P POWER SWITCHING RECTIFIERS & FILTER +V2 RECTIFIERS & FILTER +V1 COM DETECTION CIRCUIT FG O.L.P. CONTROL O.V.P. Derating Curve Static Characteristics Ta=25 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -25 -25 0 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (VERTICAL) 60 50 40 88 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:RID-85-SPEC 2008-07-23 Headquarter Switzerland: Pewatron AG Thurgauerstrasse 66 CH-8052 Zurich Phone +41 44 877 35 00 [email protected] Office Germany: Pewatron AG Edisonstraße 16 D-85716 Unterschleißheim Phone +49 89 260 38 47 [email protected] We are here for you. Addresses and Contacts. Sales Switzerland & Liechtenstein Sales International Key Accounts Postcode 3000 – 9999 Postcode 1000 – 2999 Basil Frei Pewatron AG Thurgauerstrasse 66 CH-8052 Zurich Eric Letsch Pewatron AG Thurgauerstrasse 66 CH-8052 Zurich Peter Felder Pewatron AG Thurgauerstrasse 66 CH-8052 Zurich Phone + 41 44 877 35 18 Mobile + 41 76 279 37 26 Phone + 41 44 877 35 14 Mobile + 41 76 491 66 70 Phone + 41 44 877 35 05 Mobile + 41 79 406 49 83 [email protected] [email protected] [email protected] Sales Germany Postcode 00000 – 31999 Postcode 38000 – 39999 Postcode 80000 – 99999 Postcode 32000 – 37999 Postcode 40000 – 79999 Sales Austria Kurt Stritzelberger Pewatron AG Neumarkter Straße 86a D-81673 Munich Gerhard Vetter Pewatron AG Fürstenbergstraße 12 D-55422 Bacharach-Medenscheid Kurt Stritzelberger Pewatron AG Neumarkter Straße 86a D-81673 Munich Phone + 49 89 260 52 80 Mobile + 49 171 803 41 35 Phone + 49 674 394 75 75 Mobile + 49 163 762 74 30 Phone + 49 89 260 52 80 Mobile + 49 171 803 41 35 [email protected] [email protected] [email protected] Pressure Sensors Gas sensors / Gas sensor modules Load cells Linear position sensors Angle sensors Philipp Kistler Phone + 41 44 877 35 03 [email protected] Thomas Clausen Phone + 41 44 877 35 13 [email protected] Eric Letsch Phone + 41 44 877 35 14 [email protected] Accelerometers Power supplies Current sensors Eric Letsch Phone + 41 44 877 35 14 [email protected] Sebastiano Leggio Phone + 41 44 877 35 06 [email protected] Sebastiano Leggio Phone + 41 44 877 35 06 [email protected] Drive technology CH Postcode 5000 – 9999 / DE Drive technology CH Postcode 1000 – 4999 / AT / IT / FR Roman Homa Mobile + 41 79 444 00 86 [email protected] Christian Mohrenstecher Mobile +41 76 444 57 93 [email protected] Sales Other Countries / Product Management Competitive sensor & power supply solutions worldwide