Transcript
I001401 8
7
6
5
4
3
2
1
64.2
TOP VIEW PLEXIGLAS FRONT DOOR WITH LOCKING SWING HANDLE FIELD REVERSIBLE DOOR HINGES (NO ADDITIONAL HARDWARE REQUIRED)
3/8" SQUARE MTG. HOLES 19" EIA 310-E COMPLIANT (24 RMU)
24.00
19.75 C
17.75 INSIDE
6.88
25.50
20.1
18.25
C
3.25
48.00
42.00 (24 RMU)
3.25
20.1
PAIR OF SOLID LIFT-OFF SIDE PANELS WITH LOCK
32.00
B
A
18.312 TO
PERIMETER VENTED STEEL REAR DOOR WITH LOCKING SWING HANDLE FIELD REVERSIBLE DOOR HINGES (NO ADDITIONAL HARDWARE REQUIRED)
32.0
DETAIL A
24.0
21.8
1.750 (1 RMU)
D
21.8
REMOVABLE VENTED TOP PANEL WITH TWO 4" HORSESHOE KNOCKOUTS
24.00
D
75.6
.625 .625 .500
32.00
B
B
FRONT VIEW w/ DOORS REMOVED
SECTION B-B
RIGHT SIDE VIEW
B
FRONT VIEW (4) 0.75" ANCHOR HOLES
29.51 TO 14.75
8.63
COLOR: DURABLE TEXTURE POWDER COATING A
INTERPRET DRAWING PER ASME Y14.5M-1994
(4) 1/2-13 UNC CASTER HOLES
CONSTRUCTION: 2 PAIR MOUNTING RAILS, #12 GA. C.R.S. FULLY WELDED FRAME, #16 GA. C.R.S. DOOR, SIDE PANELS, TOP PANEL, #16 GA. C.R.S. HARDWARE: PACKAGE OF QTY-50; M6 SCREWS AND CAGE NUTS, INCLUDED. 8
7
LEVELING GLIDES (4 INCLUDED) 1/2-13 UNC THREADED HOLES
11.75
WEIGHT CAPACITY: 600 LBS.
21.51 TO
RACK SPACES: 24 RMU w/ NUMBERED RMU INDICATORS, 19" EIA 310-E COMPLIANT
6 POSITION POWER STRIP 5-15R RECEPTACLE AND 5-15P PLUG
6.13
SPECIFICATIONS: DIMENTIONS: 48"H X 24"W X 32"D
REAR VIEW
6
DIMENSIONAL LIMITS APPLY AFTER APPLICATION OF FINISH DRAWING NOT TO SCALE
22.51 TO 26.01 TO BOTTOM VIEW 5
EST. WEIGHT : 168.79 lbmass THIRD ANGLE PROJECTION
4
TOLERANCE UNLESS OTHERWISE NOTED: ANGULAR +/- 1 .XXXX +/- .010 .XXX +/- .015 .XX +/- .030 .X FOR REF. ONLY UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES
3
NOTICE:
PART NUMBER:
TITLE
480E-2432P
BASE UNIT 48"H x 24"W x 32"D ENHANCED
1
QTY PER UNIT:
Use of this document is subject to a confidentiality and nondisclosure agreement with Great Lakes Case & Cabinet Co., Inc. (GLCC) and may not be reproduced, disclosed or utilized in whole or in part without prior written authorization from GLCC.
MATERIAL TYPE:
GREAT LAKES CASE & CABINET CO., INC.
CRS MATERIAL GAUGE:
P.O. BOX 551 EDINBORO, PA 16412 PHONE (814) 734-7303 FAX (814) 734-3907 E-MAIL
[email protected]
-
FINISH:
POWDERCOAT
DRAWN
DATE
3/9/2012
CDM CHECKED & APP.
WSS
2
DATE
3/16/2012
DWG NO:
480E-2432P
REV
0
SHEET:
1
1 OF
1
A
