Transcript
Specifications LCD Input signal Output signal Lens Lamp Image Input power Power adapter Projector
Model Native resolution Support resolution Video Audio Speaker Focus Model Power Life Size Brightness Keystone Voltage Power Voltage
3.5” TFT 800 x 600 1024 x 768 Component video, S-video, VGA, HDMI, USB Stereo 1W x 2 130mm LED 70W 20,000 hours 50-100” 1500 Lumens 15 degree 19V 10% 90W AC110-240V / 50-60Hz
Dimensions
8.07” x 6.3” x 2.76”
14
®
User Guide
RioHD-LED-3
®
TABLE OF CONTENT Safety Precautions ............................................................................................................... 01 What’s in the Box .................................................................................................................. 03 Projector Features ................................................................................................................ 04 Installation .............................................................................................................................. 05 Standard Setting ...................................................................................................... 05 Installation Methods ............................................................................................... 06 Connection Instructions ........................................................................................ 07 Remote Control Features ................................................................................................... 08 Image Adjustment ............................................................................................................... 09 Focus Adjustment .................................................................................................... 09 Keystone Adjustment ............................................................................................. 09 Menu Settings ....................................................................................................................... 10 Troubleshooting ................................................................................................................... 13 Specifications ......................................................................................................................... 14
Troubleshooting Problems
Possible solution(s)
No power
- Check the power cable
Remote control does not function
- Allow 5 minutes (between on and off sessions) - Check for defective batteries. Replace if needed. - Aim directly towards the IR receiver.
No image
- Make sure lens cap is removed - Check power cable and source - Check input signal
Projector turns off automatically
- Clean filter
NOTE: For more troubleshooting or support, contact
[email protected].
13
Menu Settings Setting Menu
Safety Precautions
Menu Setting
OSD Language Restore factory default Blending OSD Duration Software updates (USB)
English / Germany / Chinese Yes or No Off / Lower / Middle / High OFF / 5 sec / 10 sec / 15 sec Software updates
Supported Multimedia Formats Type
Multimedia Menu
Format
.avi .mpg Movie .dat .rm / rmvb .mov / mkv .mp3 Music .wma .m4a / .acc .jpg / .jpeg Photo .bmp .png
12
Video Decoder
Audio Decoder
DivX, Xvid, MPEG-4 MPEG-1, MPEG-2 MPEG-1 Real Media, Video H.264
MP3, WMA, AAC
Prgressive JPEG Baseline JPEG BMP Non-interlaced Interlaced
MP3 WMA AAC
Before using this projector, please read this manual carefully. WARNING: Do not stare directly into the light of the lens. WARNING: To avoid electrical shock, please do not place the projector under moist conditions. WARNING: When turning off the projector, the fans will continue to run for 90 seconds. Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp. REMOTE CONTROL BATTERY: Please insert the batteries in correctly. Keep the remote control out of reach of children or pets. 1
Safety Precautions
Menu Settings
WARNING: Before use, please read this manual carefully. If not operated correctly it can cause electrical shock or fire. When using or repairing this projector, please comply with the following suggestions. 1. Cleaning: When cleaning this projector, make sure the power is unplugged. Use a soft cloth to clean. Do not use harsh cleansers. 2. Accessories: To avoid any damages to the projector, use accessories enclosed in the package. 3. Environmental Conditions: Do not place the projector in wet or moist conditions. 4. Installation: Please only place the projector on stable and leveled areas. 5. Ventilation: Do not block ventilation when in use. Keep filter cleaned or it will cause the projector to overheat. Rinse the filter monthly.
6. Power: Match power source (220V or 110V) 7. Ground Cable: 3-pin plug 8. Power Cable: Inspect power cable before plugging into the power source. 9. Lightning: When not in use for long period of time or during storms, please unplug the power cable. 10. Repair: Due to high voltage, do not attempt to repair the projector yourself. Please contact:
[email protected] 11. Heat Sensitive Device: Do not use near other heating devices. This can damage the performance of the projector.
2
Picture Menu
Sound Menu
Picture Menu Picture mode Color Temperature Aspect Ratio Noise Reduction Flip Horizon Flip Vertical
Sound Menu Music / Movies / Sports / User / Standard Sound Mode -50~50 Balance On / Off Auto Volume Surround Sound On / Off (120 / 500 / 1.5K / 5K / 10K) Hz 50 EQ
Standard / Soft/ User / Dynamic Standard / Warm / Cool 4:3 or 16:9 / Zoom 1 / Zoom 2 Off / Low / Middle / High On / Off On / Off
Time Menu
NOTE
Clock ---Off time On time Sleep timer
User mode of picture Contrast Brightness Color Sharpness
Time Menu
0 - 100 0 - 100 0 - 100 0 - 100
Adjust the dark and brightness area difference. Adjust the full picture brightness. Adjust the picture color. Adjust the picture sharpness.
11
Date / Month / year / Hour / Minutes Off / One time / Everyday / Monday-Friday Off / One time / Everyday / Monday-Friday Off / 10 mins / 20 mins / 30 mins / 60 mins / 90 mins
Menu Settings
What’s in the Box
Menu Setting Method: 1. When projector is on, press the “menu” key. The menu will show on the screen (picture 1). 2. Press the “ < / > “ keys to change menu options to “picture” > “sound” > “time” > “set up” interface. 3. After menu is confirmed, press the “ ^ / “ key to choose sub-menu (picture 2). 4. Press “ < / > “ key to adjust the sub-menu (picture 3). 5. Press the “menu” key to exit the menu setting. ^
NOTE: If the function mark is grey, it indicates that this function is not valid.
Picture 1
Picture 2
10
Carefully unpack the product and confirm that all of the items listed below have been included. If any items are missing, contact your dealer. 1x RioHD-LED-3 Projector 1x Remote Control 1x Power Cable 1x Power Adapter 1x AV Cable 1x User Guide 1x Lens Tissue Wipes
Picture 3
3
Projector Features FRONT
REAR
Image Adjustment BOTTOM
When using the projector for the first time, please make the following focus adjustments:
12 11
6
Focus Adjustments Slowly dial the lens until the image is brought into focus.
8
1 2
Keystone Adjustments If a projected picture has keystone distortion, correct image with keystone dial located under the projector. If the image becomes trapezoid shaped when the screen or projector is not level, reposition the projector to improve its angle to the screen.
U SB
10 ®
®
3
9
7
5
USB
4
13
1. Power Button 2. Indicator Light: Red – Standby Green – Active 3. Ventilation Window
4. 5. 6. 7. 9.
Focus Lens Interface IR Receiver VGA Port USB Port
4
10. Speakers 11. Keystone Adjustment 12. High-feet Adjustment 13. Holes for Ceiling Mount
®
9
Remote Control Features Turn ON / OFF
OK
Installation Confirm
Mute
Up
Picture Mode
Down
Sound Mode
Left
Video Mode
Right
Aspect Ratio
Previous (red)
Return to previous program
WARNING: Please check the following picture for Keystone adjustment.
Standard Setting Refer to the following chart to adjust your picture size and distance. NOTE: Distance refers to the distance from the lens to the projector screen. Image sizes are measured diagonally and have 3% margin of error.
Distance
4:3
16:9
50 inches
70 inches
71 inches
60 inches
82 inches
88 inches
Next track (yellow)
72 inches
96 inches
101 inches
Source
Rewind (green)
100 inches
110 inches
148 inches
Display
Fast forward (blue)
Menu
Play / Pause
Exit
Stop
Incorrect installation, the Incorrect installation, the image on the right is smaller. image on the left is smaller. Screen
Screen symmetry axis
Projector
Correctly installation, . the image is rectangular
8
5
Installation Installation Method Contact a professional service technician to mount this projector to a ceiling. Follow the instructions below for the correct projector positions:
Installation Connection Instructions Left audio input
Source switch: 1. Press “source” key on remote control, the screen will show source (picture below) 2. Press “ ^ / ” keys to choose the source mode. 3. Press “ > “ or “ OK “ key to confirm.
Right audio input
^
WARNING: 1. To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2. This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3. The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might malfunction in a moist or wet environment. 4. Proper ventilation can help avoid overheating the projector.
6
Component video (Y/PR/PB)
HDMI input port
Video port
Power adapter input port VGA input port
S-video port
USB
Audio out port
7
