Transcript
RiverRay Quick Start Card
Inventory Included with the RiverRay system: Part Number
Name
RIVRAY600-I
RiverRay 600 kHz system
Description The RiverRay system includes the transducer, dummy plug, and protective cap. When unpacking, use care to prevent physical damage to the transducer face and connector. Use a soft pad to protect the transducer.
71B-7007-xx
RiverRay/RiverPro Float (optional)
Tri-hull float and mounting plate for tethered deployments (shown folded). Various GPS wiring configurations are available (optional)
Included with the RiverRay Accessories Kit (RIVRAY600-A): Part Number
Name
Description
UK821
Shipping case
Shipping case with custom foam cutouts.
73B-6020-005
I/O cable
The I/O cable is used for serial communications.
90B-8015-00
RiverRay Documentation CD
This CD has PDF versions of all of the RiverRay documentation including the RiverRay ADCP Guide. Please read the manual!
907-8075-00
WinRiver II Software CD
TRDI’s river and coastal data acquisition software package where the primary use is for discharge calculation. Although this is its primary function, it can be used for general coastal survey applications.
907-8040-00
RDI Tools Software CD
Utility and testing software package including BBTalk that can be used to test the ADCP.
907-8080-00
SxS Pro Software CD (optional)
Section-by-Section (SxS) Pro is a stationary ADCP discharge data collection and processing program. This CD will be included with the SxS Pro upgrade (registration code is required to collect data).
91B-8007-00 90B-8020-00 (CD)
Q-View Software (optional)
Q-View is designed for customers using WinRiver II software to have easy access to an evaluation of the quality of collected data while they are still in the field and back in the office. Once purchased, a download link and activation code is sent.
95B-6064-00
RiverRay Quick Start Card
A printed reference card showing RiverRay operational overview and inventory. A PDF version is included on the RiverRay documentation CD.
957-6274-00
Serial Communications Setup Card
A printed quick reference card showing serial communications setup. A PDF version is included on the WinRiver II CD.
957-6277-00
SD1000U Bluetooth Communications Setup Card
A printed quick reference card showing Bluetooth communications setup. A PDF version is included on the WinRiver II CD.
SD1000U DAT5-G01R
USB Bluetooth device
USB Bluetooth device SD1000U plus the Sena DAT5-G01R antenna.
Spare parts and tools
Includes a driver and spare mounting hardware for the float mounting plate. Also includes a 3mm Allen wrench for removing and connecting the I/O cable strain relief.
For instructions on using the Bluetooth device, see the SD1000U Bluetooth Communications Setup Card, the WinRiver II or SxS Pro Software User’s Guide, and the instructions and Bluetooth driver CD included with the device.
Installing the Software To install the Pioneer Documentation CD and RDI Tools software CD: 1. 2. 3.
Insert one of the CDs into the drive. Use Windows Explorer® to open the CD drive folder. Double-click on the launch.exe file. When the browser starts: • To install RDI Tools, click the Install button and then click the Install RDI Tools button. •
To install the Pioneer documentation, click the View Manuals button and then click on the Copy Documentation to Disk button. Many companies require that Autorun is disabled. Double-click on Launch.exe to start the browser on all TRDI software and documentation CDs.
4.
nd
Repeat steps 1 through 3 for the 2 CD.
P/N 95B-6064-00 (August 2015)
RiverRay Quick Start Card
RiverRay Operation Overview Inventory Verify all parts are present (see the reverse side of this card for a list of parts)
Install the Software Install the Documentation CD
Install WinRiver II
Install SxS Pro (optional )
Install RDI Tools
Install Q-View (optional)
Mount the RiverRay to the Float Read the RiverRay ADCP Guide, Chapter 2
Communication Setup Bluetooth - use the USB Bluetooth device (refer to the Bluetooth Communications Setup Card)
Serial - use the I/O cable (refer to the Serial Communications Setup Card)
WinRiver II Setup Run the WinRiver II wizard (refer to the WinRiver II Software User's Guide, Chapter 3)
QA/QC Set the ADCP's Clock
Test the ADCP
Collect Data Use WinRiver II to collect at least four transects (refer to the WinRiver II Software User's Guide, Chapter 3)
Post Process Data Use WinRiver II (refer to the WinRiver II Software User's Guide, Chapter 3)
P/N 95B-6064-00 (August 2015)
Calibrate the compass
