Transcript
6" LED Downlight
DATE: TYPE:
RLF6ML LENS
FIRM NAME:
A
PROJECT:
120V - 277V 0-10V Dimming
©
APPLICATIONS:
Ceiling Cutout: see guide B Maximum Ceiling Thickness 11/2" For conversion to millimeters, multiply inches by 25.4 Not to Scale
LED LIGHT ENGINE:
LiteFrame Retroficient© RLF6ML is a 6" specification grade Retrofit LED retrofit downlight that combines superior brightness control with energy savings and low maintenance costs. The RLF6ML is designed specifically to retrofit into ceilings with existing recessed downlight fixtures without the need to remove the existing fixture. Suitable for a variety of commercial, retail, and institutional applications with ambient temperature up to 25ºC (75ºF) in open plenum applications.
The RLF6ML uses the Philips Fortimo DLM Gen 5 LED Module with remote phosphor technology. This technology provides controlled color consistency (3 SCDM) from fixture to fixture. The system is designed for optional life and lumen maintenance (>50,000 hours at 70% lumen maintenance). Both reflector and light engine assembly are mechanically retained to housing. The light engine comes standard with 90 CRI in all Kelvin temperatures.
LED DRIVER:
HOUSING:
All components are made from quality die cast aluminum or galvaneal steel. Pre-wired j-box with snap-on cover for easy access. Snap-in- connection from driver compartment allows easy installation of light engine/trim assembly without tools above or below the ceiling and can be upgraded to accommodate technology improvements. Approve for 8 (4 in/4 out) No. 12 AWG conductors rated for 90ºC through wiring.
G
C
The RLF6ML utilizes the Philips Fortimo LED Driver specifically designed to optimize efficiency of the Fortimo DLM Module. Driver is designed to match the 50,000 hour minimum life expectancy of the system. Meets UL Class 2, inherent short circuit protection, self limited, overload protected. If critical temperatures are reached on driver or LED module, integrated thermal feedback loop will gradually reduce current to protect system life. Driver is universal 120V-277V. Optional Lutron Series A driver is also available.
F E
D
A
DIMMING:
Comes standard with 0-10V dimming capability. Flickerfree dimming to 10%. 0-10V control may consume up to 1mA. 0-10V, Lutron 2 wire, 3 wire, and EcoSystem dimming available to 1%.
INSTALLATION:
All installation can be performed from below the ceiling without removing existing fixture.
CERTIFICATIONS:
CSA certified to US and Canadian safety standards. Suitable for wet locations. Approved for through wiring. Non-IC rated.
REFLECTOR:
High purity aluminum, Alzak, iridescence suppressed, semi-diffuse reflector. Self-trim standard. Painted white self-trim (WT) available as option.
B
WARRANTY:
5 year warranty. See www.prescolite.com for details "A"
"B"
"C"
"D"
"E"
"F"
"G"
12-3/4" - 15"
8-7/8" - 10-3/4"
6"
7"
5-3/4"
2-1/2" - 3-3/4"
6-1/4" - 7-1/2"
See page 3 for NX(W)E line art
CATALOG NUMBER:
EXAMPLE: RLF6ML 6LFML30L40KWHWT
Order housing, reflector, and accessories separately
HOUSING ❑ RLF6ML Medium Lumen 0-10V 10% dimming 120-277V
DRIVER OPTION
VOLTAGE OPTION
Standard 0-10V 10% Dimming
Standard 120V-277V
❑ DM11 0-10V dimming at 1% ❑ HDM6 Lutron 3-wire/ EcoSystem to 1% ❑ 2DM6 Lutron 2-wire Leading Edge to 1% (120V only)
_
❑ 120 120V ❑ 277 277V
HOUSING OPTIONS ❑ SD2 Small Diameter ❑ LV7 Lutron Vive Enabled, 0-10V, 120277V ❑ LVE (HDM Only) Lutron Vive Enabled, EcoSystem
TRIM APERTURE
REF. FINISH OPTIONS
REF. COLOR OPTIONS
❑ 6LFML30L ❑ SP Semi-Diffuse Specular Clear Alzak ❑ SS Reflector with Semi-Specular 3000 Lumen ❑ MFC Module American Matte™ ❑ V KELVIN Kurt Versen Specular ❑ 30K 3000 Kelvin, ❑ VS Kurt Versen 90 CRI Softglow® ❑ 35K 3500 Kelvin, ❑ VSS Kurt Versen 90 CRI SoftSheen™ ❑ 40K 4000 Kelvin, 90 CRI
❑ NXWE9,10 NX Wireless Enabled
LENS
G
_
(Brushed Aluminum Flange Standard)
WNCTB or NR Voltage must be specified with HDM and 2DM 7 LV requires standard dimming or DM1 8 Must select CL or DL 9 Not available with LV or LVE 10 Not available with HDM or 2DM 6
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
Web: www.prescolite.com
•
ACCESSORIES F
❑ LFSC6 ❑ WT ❑ CL E 6" Reflector screw cover Painted White Clear Lens ❑ CG D ❑ LiteGear3 Flange Only (Regressed Champagne Inverter, single phase central ❑ WF5 Standard) Gold Alzak lighting, 125VA-250VA Wide Flange ❑ DL ❑ GD ❑ LPS Series3 ❑ BNCT4,8 Gold Alzak Diffuse Lens LitePower micro-inverter, Black Non❑ BL (Regressed conductive trim 20VA-55VA Black Alzak 4,8 Standard) ❑ WNCT ❑ RWD6 ❑ WE White NonRetrofit wide housing kit Wheat Alzak conductive trim ❑ LW ❑ BNCTB4,8 Light Wheat Black NonAlzak conductive trim ❑ PW Baffled Pewter Alzak Notes: ❑ WNCTB4,8 1 ❑ WH For DM1, do not specify a voltage if 120 or 277 White NonPainted Matte 2 See housing compatibility guide on page 2 conductive trim 3 White Reflector See Central Inverter compatibility note and and Flange Baffled web links on page 2 ❑ BC 4 Not available with color/finish options. SemiPainted Black Reflector and Diffuse finish only. Flange 5 Not available with BNCT, WNCT, BNCTB,
❑ FLU4 Flush Mount Lens
Dual SmartPorts
C
Standard Clear Alzak
REFLECTOR OPTIONS
❑ NXE9,10 NX Enabled,
A Division of Hubbell Lighting, Inc.
TRIM OPTIONS
Tech Support: (888) 777-4832
RTF-029
PHOTOMETRIC DATA DRIVER DATA
RLF6ML30L 30K
Input Voltage
120V-277V
Input Frequency
60 Hz
Input Current
0.299A (120V)
0.129A (277V)
701 Millennium Blvd Greenville, SC 29607 Input Power
Retroficient© - 6" RLF6ML Lens
36W
www.hubbelllighting.com
5
Power Factor
≥0.90
THD <20% EMI Filtering
PAGE: 2 OF FCC5
47CFR
Part 15, Class A
Operating Temperature -20ºC to 25ºC Dimming 0-10V Over-voltage, over-current, short-circuit protected *Power consumption and photometric output may vary slightly with HDM or 2DM Driver.
RLF6ML 6LFML30L30KDL LED Light Engine: 3000K, 90 CRI System Wattage: 35.9W Fixture Delivered Lumens: 2082 Fixture Efficacy: 57.8 Spacing Criteria: 1.1
ZONE
CANDELA DISTRIBUTION 90˚ 90º
75˚ 75º 450 450 60˚ 60º
900 900 45˚ 45º
1350 1350
0º0˚
15˚ 15º
LUMINANCE DATA IN CANDELA/ SQ. METER Angle in Vertical Average 45° 42100 55° 22624
ZONAL LUMEN SUMMARY
DEG
CANDELA
0 5 15 25 35 45 55 65 75 85 90
1243 1241 1208 1081 805 456 199 73 16 0 0
LUMENS
%LUMINAIRE
0-30
953
45.8
0-40
1451
69.7
0-60
1988
95.5
0-90
2082
100.0
1 2
3
4
5
6
30˚ 30º
7
8
Test No. 17.01435 Tested at 25ºC Ambient in accordance to IESNA LM-79-2008
4084 0
9 10
Zonal Cavity Method
70%
50%
30%
10%
20% Effective Floor Cavity Reflectance % Wall Reflectance
70 50 30 10 70
50
30
10 50 30 10 50
112 109 106 103 109 106 104 101 102 100 98 105 98 93 89 102 97 92 88 93 89 86 97
91
85
79
74
70
66 62
89
81
74
68
63
58
54 50
83
74
67
61
55
51
47 43
78
69
62
56
50
46
42 39
95
89
83
78
73
68
64 61
RLF6ML 6LFML30L30KDL
Web: www.prescolite.com • Tech Support: (888) 777-4832 701 Millennium Boulevard • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000 Specifications subject to change without notice. • Printed in U.S.A. • RTF-029 • 9/18/17
11254
75° 85°
% Effective Ceiling Cavity Reflectance
80%
OT BE USED BY THE CLIENT TO CLAIM PRODUCT CERTIFICATION, T, OR ANY AGENCY OF THE FEDERAL GOVERNMENT.
Copyright ©2017 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
65°
COEFFICIENTS OF UTILIZATION Room Cavity Ratio
DL
Constant Current Output .3-1.0A
88
80
73
67
62
57
53 50
82
74
67
60
55
51
47 43
77
69
61
55
50
46
42 39
85
78
71
66
61
56
52 49
80
72
65
60
54
50
46 43
76
68
61
55
50
45
42 38
98 90
83
76
70
64
59
55
51 48
30
10
50
30
97 87
95 84
95 87
94 85
78
71
64
59
54
49
46 42
75
67
60
54
50
45
42 38
80
74
68
63
58
54
50 47
77
70
63
58
53
49
45 42
10 92 82
74
66
60
54
49
45
41
38
Test No. 17.01435
PHOTOMETRIC DATA
Retroficient© - 6" RLF6ML Lens
Dimming Compatibility Table Dimming Ballast DM/DM1 DM/DM1
HDM 2DM
Manufacturer Lutron DVTV Leviton AWRMG-7xx, AWSMG-7xx, AWSMT-7xx Lutron Lutron
Housing Compatibility Guide
Web Link http://bit.ly/11jSvZg http://bit.ly/1BJn2R9
Ordering Guidelines
6
Requires SD Housing Option
http://bit.ly/1vtjHAl http://bit.ly/1nF4Zp1
inch
min
max
5-15/16
6-1/8
All Standard Housings
6-1/8
6-1/2
Requires RWD Kit Accessory & WF Reflector Option
6-1/2
6-7/8
Dimensions shown are for the diameter of the frame flange at it's narrowest point
Central Inverters For full fixture output in back-up mode, we recommend you visit www.dual-lite.com for your Central Lighting Inverter options. Please contact your local Hubbell representative for any assistance with proper sizing and loading of your inverter selection. Central lighting inverters must be ordered separately. LiteGear: www.dual-lite.com/products/litegear_lg_series LPS Series: www.dual-lite.com/products/lps
A
™
NX Distrubuted Intelligence: Supports indoor and outdoor applications, wired, wireless and hybrid networked NX lighting control deployments and enables emerging applications such as Hubbell Lighting’s SpectraSync™ color tuning technology. See separate NX™ Solutions Guide for additional details. See Hubbell Controls Solution NX Brochure. B A
G
C
F
5-3/4" 7"
B
"A"* "B"* 14-3/4" - 17" 10-7/8" - 12-3/4"
"A"* RLF6ML LENS NX(W)E
"B"*
14-3/4" - 17"
10-7/8" - 12-3/4"
"C"* 6-3/4"
"C"* 6-3/4"
"F"* "G"* 2-1/2" - 3-3/4" 6-3/4" - 8"
"F"* 2-1/2" - 3-3/4"
RLF6ML LENS NX(W)E G
C
F
5-3/4" 7" "A"* "B"* 14-3/4" - 17" 10-7/8" - 12-3/4"
"C"* 6-3/4"
"F"* "G"* 2-1/2" - 3-3/4" 6-3/4" - 8"
Web: www.prescolite.com • Tech Support: (888) 777-4832 701 Millennium Boulevard • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000 Copyright ©2017 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved Specifications subject to change without notice. • Printed in U.S.A. • RTF-029 • 9/18/17
"G"* 6-3/4" - 8"
