Transcript
FEBRUARY 2008 RM155A-R2 RM156A-R2 RM161A-R2 RM162A-R2
Premier Aluminum Distribution Rack Specifications Color: RM155A-R2–RM156A-R2: Mill; RM161A-R2–RM162A-R2: Black Construction: 6063-T6 aluminum alloy Finish: RAL 9005 black polyester powder paint or milled aluminum Load Rating: 1000 lb. (453.6 kg) Size: RM155A-R2, RM161A-R2: 76"H (38 U) x 20.25"W x 15"D (193 x 51.4 x 38.1 cm); RM156A-R2, RM162A-R2: 84"H (45U) x 20.25"W x 15"D (213.4 x 51.4 x 38.1 cm)
Overview The Premier Aluminum Distribution Rack is used to hold networking and data transmission equipment. It’s made of strong, lightweight aluminum. Four models are available: The RM155A-R2 is 6-feet (1.8-m) high with a mill finish; the RM156A-R2 is 7-feet (2.1-m) high with a mill finish; the RM161A-R2 is a 6-foot (1.8-m) rack with a black finish; and the RM162A-R2 also has a black finish, but it’s 7-feet (2.1-m) high. The rack’s side rails are tapped on both sides with 12-24 threads for quick installation. An EIA universal 5⁄8"-5⁄8"-1⁄2" vertical mounting hole pattern matches industry standards and connects to most racks for easy system expansion. It’s packed unassembled and includes 2 rails, 2 bases, 2 top angles, 20 12-24 mounting screws, 12 hex bolts, and this users’ manual.
CUSTOMER SUPPORT INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail:
[email protected]
Assembly 1. Lay both rails on the floor with the open ends facing each other. 2. Align the two holes on one of the bases to the side of both rails. Secure the base in place with four hex bolts (2 on each side). 3. Align the single hole on one of the rails with one of the top angles. Secure the top angle with two hex bolts (one on each side). 4. Turn the assembly over and repeat steps 1–3. 5. Use the 20 12-24 mounting screws to attach equipment to the rack.
TRADEMARKS USED IN THIS MANUAL BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
© Copyright 2008. Black Box Corporation. All rights reserved. 1000 Park Drive
•
Lawrence, PA 15055-1018
•
724-746-5500
•
Fax 724-746-0746
