Preview only show first 10 pages with watermark. For full document please download

Rmn351-r2

   EMBED


Share

Transcript

Overview The Wallmount Cabinet houses electronic controls, instruments, and components in indoor environments that may otherwise be exposed to dirt, dust, oil, and water. It has provisions for rackmounting in front and for panel mounting (using optional panels, ordered separately) in back. The cabinet features a full front viewing window, flush quarter-turn latching, and a double-hinged body for easy installation and maintenance. Two heights are available: the RMN300A-R2 is 24.02"H (53.39 cm), and the RMN350A-R2 is 35.98"H (91.38 cm). The cabinet’s front compartment latches open and closed with a quarter-turn latch. The cabinet’s rear compartment has internal, self-aligning latching for high reliability. For safety and maximum visibility, the cabinet’s window door has safety glass permanently bonded in place. Adjustable rack angles provide 19-inch mounting per EIA 310-D/IEC 297-1 universal spacing for easy installation. Square-hole rack angles accept cage nuts, making mounting simple. Cage nuts and screws are included for mounting the optional rear panel (RMN301-R2 or RMN351-R2). To mount the cabinet to a wall, attach the wallmounting brackets to the back of the cabinet using the included four star washers and four screws. What’s Included The Wallmount Cabinet includes the following items. If anything is missing or damaged, contact Black Box at 724-746-5500. • Wallmount Cabinet • (20) cage nuts • (20) screws • (2) wallmounting brackets that mount to the cabinet’s back panel (wallmounting screws for attaching the cabinet to the wall are not included; however, screws and washers for attaching the brackets to the cabinet are included—see below) • (4) star washers for attaching the wallmounting brackets to the cabinet • (4) screws for attaching the wallmounting brackets to the cabinet • This user’s manual Accessories An optional panel can be installed in the back of the cabinet to hold equipment. Use the 12U Panel (RMN301-R2) for the RMN300A-R2 or the 19U Panel (RMN351-R2) for the RMN350A-R2. TRADEMARKS USED IN THIS MANUAL BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc. UL is a registered trademark of Underwriters Laboratories Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. © Copyright 2008. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 JANUARY 2008 RMN300A-R2 RMN301-R2 RMN350A-R2 RMN351-R2 Wallmount Cabinet Specifications Standards: UL® 508A, 508 File No. E61997, Type 1; NEMA/EEMAC Type 12 and Type 13; CSA, File No. LR42186, Type 12; EIA 310-D; IEC 60529; IP55 Construction: Door and body: 14-gauge steel Finish: RAL 7035 textured, light-gray, polyester powder coating inside and out over phosphatized surfaces; optional panels are orange Size: RMN300A-R2: 24.02"H (12U) x 24.06"W x 14.96"D (53.39 x 61.11 x 37.99 cm); RMN301-R2: 21"H x 21"W (53.34 x 53.34 cm); RMN350A-R2: 35.98"H (19U) x 24.06"W x 24.02"D (91.38 x 61.11 x 61.01 cm); RMN351-R2: 33"H x 21"W (83.82 x 53.34 cm) Load Capacity of Center Section: RMN300A-R2: 100 lb. (45.35 kg); RMN350A-R2: 125 lb. (56.69 kg) CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: [email protected]