Transcript
© Copyright 2008. Black Box Corporation. All rights reserved. 1000 Park Drive
•
Lawrence, PA 15055-1018
•
724-746-5500
•
Fax 724-746-0746
AUGUST 2008 RMW5100AF
Double-Hinged ClimateCab with Fan and Filter
CUSTOMER SUPPORT INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail:
[email protected]
TRADEMARKS USED IN THIS MANUAL TRADEMARKS USED IN THIS MANUAL BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc. UL is a registered trademark of Underwriters Laboratories Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
1
DOUBLE-HINGED CLIMATECAB WITH FAN AND FILTER
1. Specifications Standards: UL® 508A, 508 File No. E61997, Type 1; NEMA/EEMAC Type 12 and Type 13; CSA, File No. LR42186, Type 12; EIA 310-D; IEC 60529; IP55 Construction: Door and body: 14-gauge steel Finish: RAL 7035 textured, light-gray, polyester powder coating inside and out over phosphatized surfaces; optional panels are beige Size: RMW5100AF: 24.02"H (12U) x 24.06"W x 24.02"D (53.39 x 61.11 x 53.39 cm); RMN301-R2: 21"H x 21"W (53.34 x 53.34 cm) NOTE: The optional 12U Panel (RMN301-R2) is sold separately (see Section 2.2).
Load Capacity of Center Section: 100 lb. (45.35 kg) Maximum Equipment Depth: 21.24" (53.9 cm)
2
CHAPTER 2: Overview
2. Overview The Double-Hinged ClimateCab with Fan and Filter houses electronic controls, instruments, and components in indoor environments that may otherwise be exposed to dirt, dust, oil, and water. It has provisions for rackmounting in front and for panel mounting (using optional panels, ordered separately) in back. The cabinet features a full front viewing window, flush quarter-turn latching, and a double-hinged body for easy installation and maintenance. The fan and filter enables the cabinet to use the ambient air to cool the internal equipment. Filters help remove contaminants. You can remove the filter to clean it without accessing the cabinet. The top-mounted fan increases airflow and keeps internally mounted equipment cool. The cabinet is 24.02"H (53.39 cm) high. Its front compartment latches open and closed with a quarter-turn latch. The cabinet’s rear compartment has internal, selfaligning latching for high reliability. For safety and maximum visibility, the cabinet’s window door has safety glass permanently bonded in place. Adjustable (up to 2.4" [6.1 cm]) rack angles provide 19-inch mounting per EIA 310-D/IEC 297-1 universal spacing for easy installation. Rack angles are tapped 10-32 to make mounting simple.
2.1 What’s Included The Double-Hinged ClimateCab with Fan and Filter includes the following items. If anything is missing or damaged, contact Black Box at 724-746-5500. • Double-Hinged ClimateCab with Fan and Filter • (20) 10-32 screws • (2) grounding point stickers • (8) nuts • (2) bolts • (4) steel washers • (4) black plastic caps • (4) white plastic sealing washers
3
DOUBLE-HINGED CLIMATECAB WITH FAN AND FILTER • (6) nuts with star washers • (1) square grounding star washer • (1) pair of keys • This user’s manual
2.2 Optional Accessories An optional panel can be installed in the back of the cabinet to hold equipment. Use the 12U Panel (RMN301-R2) for the RMW5100AF.
4
CHAPTER 3: Installation
3. Installation 3.1 Installing the Cabinet Use the mounting holes on the back of the ClimateCab for convenient mounting through the enclosure. Hardware for inside the cabinet is included; hardware for outside the cabinet is not included. Attach the cabinet to a wall or other structure via 3⁄8" fasteners (not included), flat washers (not included), and nuts (not included). For proper sealing and enclosure protection rating, use the sealing washers (included). Install the sealing washers inside the enclosure with the tapered cone against the enclosure, then add the steel washers (included). See Figure 3-1. Steel washer (not included)
Nut (not included)
Sealing washer (included) Sealing washer (included)
Steel washer (included)
Steel washer (included)
3 ⁄8" fasteners (not included)
⁄8" fasteners (not included) 3
0.75" (19 mm)
Sealing washer (included) Steel washer (included) 0.75" (19 mm)
0.50" (13 mm)
Nut (included)
White sealing washer (keeps water out of cabinet)
Outside of cabinet
Figure 3-1. Cabinet installation. 5
DOUBLE-HINGED CLIMATECAB WITH FAN AND FILTER 3.2 Installing the Optional Panel
NOTE When installing the panel, you might need to bend the mounting studs slightly so that the panel fits in place.
Nut with star washer (included) Nut with star washer (included)
Nut (included) Grounding wire
Square grounding star washer (included)
Figure 3-2. Panel installation.
6
CHAPTER 3: Installation 3.3 Grounding the Door Ground the door as shown in Figure 3-3.
Grounding wire (not included) Grounding point stickers (included)
Bolt (included)
Nut with star washer (included)
Nuts with star washers (included)
Nut with star washer (included)
Figure 3-3. Door grounding.
7
