Transcript
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Features Compliant with ITU-T G.984.2 CLASS B+/C+ Compliant with SFF8472 diagnostic monitoring interface Industry standard 2×10 footprint SC/APC connector DC/AC Coupling Data In/Out Interface Transmitter burst mode and Receiver continuous mode Compatible with solder and aqueous wash processes Class 1 laser product complies with EN 60825-1
Ordering Information Part Number LSF2-C3M-TC-N3-HD LSF2-C3M-TI-N3-HD
Page 1 of 11 Version 1.1 Date:12/17/2013
TX
RX
IN/OUT
SD
Burst Control
1310
1490 nm
DC/AC
LVTTL
1490 nm
DC/AC
LVTTL
nm 1310 nm
RX 1550nm Input
Temperature
Connector
LVTTL (Enable: Logic “1”)
Blocked
0 °C to 70 °C
SC/APC
LVTTL (Enable: Logic “1”)
Blocked
-40 °C to 85 °C
SC/APC
Website: www.apacoe.com.tw
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Diagnostics Parameter
Range
Accuracy
Unit
Temperature
-40 to 95
±3
Voltage
3.0 to 3.6
± 0.1
V
Bias Current
0 to 100
± 10%
mA
TX Power
-3 to +7
± 3 dB
dBm
RX Power
-28 to -8
± 3 dB
dBm
o
Calibration
C
Internal
Absolute Maximum Ratings Parameter
Symbol
Min.
Max.
Unit
Storage Temperature
TS
−40
85
°C
Operating
Ta
-40
85
°C
Vcc
0
4.0
V
Soldering Temperature
TSOLD
---
260
°C
Optical Input Power (Peak, 1550nm)
P1650
+10
dBm
Optical Input Power (Peak, 1650nm)
P1650
+10
dBm
Optical Input Power (average, 1490nm)
Pin
+2
dBm
Case Temperature
Supply Voltage
Note
10 seconds on leads
Operating Environment Parameter
Symbol
Min.
Max.
Unit
Case Operating Temperature
TC
0 -40
70 85
°C
Supply Voltage
Vcc
3.135
3.465
V
Supply Current(B.O.L)
ITX + IRX
---
350
mA
Supply Current(E.O.L)
ITX + IRX
---
400
mA
Humidity (without dew)
RH
5
95
% RH
Page 2 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
Note
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Transmitter Electro-optical Characteristics
Vcc = 3.135 V to 3.465 V, TC = 0 °C to 70 °C ( -40 °C to 85 °C ) Parameter Symbol Min.
Typ.
Max.
Unit
Note
Output Optical Power (BOL) 9/125 μm fiber (Average) Output Optical Power (EOL)
Pout
+1
+5
dBm
9/125 μm fiber (Average)
Pout
+0.5
+5
dBm
Extinction Ratio
ER
10
---
---
dB
Center Wavelength
λC
1290
1310
1330
nm
Spectral Width (-20dB)
Δλ
1
nm
SMSR
30
dB
260
ps
Side Mode Suppression Ratio Rise/Fall Time (20−80%)
Tr, f
---
Output Eye Average Launched power of OFF
---
Compliant with ITU-T G.984.2 POFF
-45
dBm
TX Burst off /Disable Assert Time
Ton
12.8
ns
16bit
TX Burst off/Disable Negate Time
Toff
12.8
ns
16bit
-6
dB
λ=1310nm
-15
dB
transmitter
Transmitter reflectance Tolerance to the transmitter incident light power
Tot
TX Burst off /Disable Voltage-High
VIH
2.0
---
VCC
V
LVTTL
TX Burst off /Disable Voltage-Low
VIL
0
---
0.8
V
LVTTL
Data Input Voltage - High
VIH
Vcc-1.1
---
Vcc-0.6
V
LVPECL DC coupled inputs
VIL
Vcc-1.9
---
Vcc-1.6
V
Data Input Voltage – Low
Page 3 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
LVPECL DC coupled inputs
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Table 1: Optical output operation Item Input & Condition DATA TXOFF 1 Normal data 2 Logical High Enable Continuation 3 Logical Low Continuation 4 Same Level 5 X Disable
Output Optical output *1 ON Other Other Other OFF
X=Do not care(include Same level) *1: ON=Optical output, OFF=Less than –45dBm, Other= Less than +8dBm(peak)
TX_SD function
Page 4 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Receiver Electro-optical Characteristics
Vcc = 3.135 V to 3.465 V, TC = 0 °C to 70 °C ( -40 °C to 85 °C ) Parameter Optical Input Saturation Power (Overload)
Symbol
Min.
Typ.
Max.
Unit
Note
PIN
-8
---
---
dBm
Note1
Optical Input Power-minimum (Sensitivity-Class B+),BER< 1.0x10-10 Optical Input Power-minimum (Sensitivity-Class C+),BER< 1.0x10-4
PIN
---
---
−28
dBm
Note1
PIN
---
---
−30
dBm
Note4
Operating Center Wavelength
λC
1480
1490
1500
nm
Optical isolation (1260 ~1360nm)
ISO
---
---
-45
dB
Optical isolation (1550 ~ 1560nm)
ISO
---
---
-25
dB
Receiver reflectance (1480 to 1500nm)
---
---
−12
dB
Note2
Receiver reflectance (1550 to 1560nm)
---
---
−20
dB
Note3
Signal Detect-Asserted
PA
---
---
−28
dBm
Signal Detect-Deasserted
PD
−44
---
---
dBm
Signal Detect-Hysteresis
PA − PD
0.5
---
---
dB
Signal Detect Output voltage-High
VOH
2.4
---
VCC
V
LVTTL
Signal Detect Output voltage-Low
VOL
0
---
0.4
V
LVTTL
VDIFF
0.5
---
1.8
V
AC Coupled
Data Output Amplitude (Differential)
-10
23
Note1: With BER better than or equal to 1.0x10 ,measured in the center of eye opening with 2 -1 NRZ PRBS, and Extinction Ratio=10dB. Note2: Measured with 1490nm Note3: Measured with 1550nm Note4: With BER better than or equal to 1.0x10-4,measured in the center of eye opening with 223-1 NRZ PRBS, and Extinction Ratio=10dB.
Page 5 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Connection Diagram Pin-Out
10
9
8
7
6
5
4
3
2
1
17
18
19
20
Top View
11
Pin Symbol 1 NC 2
RX GND
3
RX GND
4 5
NC NC
6
RX GND
7
VCCR
8
SD
9
RD–
10
RD+
11
VCCT
12
TX GND
13
TXoff
14
TD+
Page 6 of 11 Version 1.1 Date:12/17/2013
12
13
14
15
16
Description Not Connected Receiver Signal Ground Directly connect this pin to the receiver ground plane. Internal connected to TX GND. Receiver Signal Ground Directly connect this pin to the receiver ground plane. Internal connected to TX GND. Not Connected Not Connected Receiver Signal Ground Directly connect this pin to the receiver ground plane. Internal connected to TX GND. Receiver Power Supply Provide +3.3 Vdc via the recommended receiver power supply filter circuit. Signal Detect. Normal optical input levels to the receiver result in a logic “1” output, VOH, asserted. Low input optical levels to the receiver result in a fault condition indicated by a logic “0” output VOL, de-asserted. Signal Detect is a single-ended LVTTL output. Receiver data output. AC coupled output RD- output will be muted when SD “Low” level. Receiver data output. AC coupled output RD+ output will be muted when SD “Low” level. Transmitter Power Supply Provide +3.3 Vdc via the recommended transmitter power supply filter circuit. Transmitter Signal Ground Directly connect this pin to the transmitter signal ground plane. Internal connected to RX GND. Transmitter Enable/Burst on Connect this pin to LVTTL logic high “1” to enable transmitter. To disable module connect to LVTTL logic low “0”. Transmitter Data In LVPECL, internally DC-coupled. Website: www.apacoe.com.tw
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
15
TD–
16
TX GND
17 18 19 20
SCL SDA TX_Fault TX_SD
Page 7 of 11 Version 1.1 Date:12/17/2013
Transmitter Data In-Bar LVPECL, internally DC-coupled. Transmitter Signal Ground Directly connect this pin to the transmitter signal ground plane. Internal connected to RX GND. Clock line of the I2C bus Data line of the I2C bus Assert high when transmitter fault. Assert high when transmitter on.
Website: www.apacoe.com.tw
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Recommended Circuit Schematic 0.1uF
3.3V
TX GND(12, 16, 20)
1uH
VCCT(11) VCCR(7)
0.1uF
1uH 10uF
GPON MAC
RX GND(2, 3, 6)
0.1uF
TX_BRST(13) 3.3V
130
PON_TX_DISABLE
TD+(14)
Z=50
TD-(15)
3.3V
GPON MAC
LD Driver
82
TXN
Z=50
82
TXP
130
10uF
82
82
SerDes
RXN
RD-(9)
0.1uF
Z=50
RD+(10)
0.1uF
130
LIA
3.3V 10K
130
RXP
Z=50
PON_LOS
PON_SDA PON_SCL
Page 8 of 11 Version 1.1 Date:12/17/2013
SD(8) SDA(18) SCL(17)
Website: www.apacoe.com.tw
Controller
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Recommended Board Layout Hole Pattern
Unit : mm(inches)
Page 9 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
12.5Max
9.05
48.20 13.50
8.89±0.1
1.1Max
9.50
Max
12 Max
4.75±0.1
5.5
Drawing Dimensions
L
1.0±0.1 24.16
4.55
0.30
3.3±0.3
39 Max
1.0±0.1
26.70 0.45±0.10
1.78
L=160 (+/-20) unit : mm
Page 10 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
0.3±0.05 10.16
RoHS Compliant TX-1310/RX-1490,1244Mbps upstream/2488Mbps downstrean 2×10 Pigtail SC/APC Connector, 3.3 V, with Digital Monitoring G-PON ONU , Class B+/C+ (G984.2)
Eye Safety Mark The LSF series Single mode transceiver is a class 1 laser product. It complies with EN 60825-1 and FDA 21 CFR 1040.10 and 1040.11. In order to meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings.
Required Mark Class 1 Laser Product Complies with 21 CFR 1040.10 and 1040.11
Caution All adjustments have been done at the factory before the shipment of the devices. No maintenance and user serviceable part is required. Tampering with and modifying the performance of the device will result in voided product warranty.
Note : All information contained in this document is subject to change without notice.
Page 11 of 11 Version 1.1 Date:12/17/2013
Website: www.apacoe.com.tw
