Transcript
ROOF TOP AUTONOMOUS HEAT GENERATION EQUIPMENTS, WITH ADI BOILERS, FOR OUTDOOR INSTALLATION
DING ACC
• Self-supporting structure • Maintenance from outside the equipment • Adisa compact technology. Sizes and
weights: the smallest on the market
• Power outputs up to 2,715 kW
in a single casing
ADISA HEATING DIVISION
LU
ULATIO UM
OSSIB •P I
OF I N C TY LI
N
• Hot water generation for heating and/or
domestic hot water in centralised installations
• Natural gas or LPG operation • A high efficiency solution for the residential,
hotel, commercial and service sectors
ADISA ROOF TOP: MAXIMUM EFFICIENCY ANNUAL OPERATION Includes • ADI HT, ADI LT and ADI CD gas boilers: maximum efficiency, minimum pollutant emissions. • Complete hydraulic circuit adapted to the needs of the installation. • Gas circuit. • Electrical cabinet with regulation. • Flues chimneys. The systems and components of the equipment are duly interconnected for correct operation.
Self-supporting structure
• Power outputs up to 2,715 kW in one casing. • Supports the weight of the equipments included. • Galvanised steel casing with Skin Plate protection, fireproof acoustic insulation (M0). • All internal elements of the ROOF TOP are accessible from the outside thanks to the hinged doors.
More safety for new and/or renovated installations Always placed outside (not part of the building structure).
• Equipment prepared for weatherproof installation. • The autonomous equipment is ventilated directly to the outside. • The gas line passes outside the building. • The equipment can be installed in existing buildings without any need to strengthen structures. • Safe, fast start-up. • Quality control: all ROOF TOP equipments are subject to comprehensive operation tests in factory.
Savings in costs and time of installation • It can be installed in any season of the year. • The installer can attend other installations at the same time. • One delivery time, one single supplier. • Shorter installation time: - Easy transport and placement (self-supporting structure). - Fast installation: PLACE AND CONNECT (water, gas and electricity). • Fast and safe start-up: - Internal equipments fully connected. - Seal and operation tests in factory before delivery. • After-sales: technical assistance guaranteed by ADISA Official After-sales Technical Service.
MAIN CHARACTERISTICS Hydraulic design The hydraulic circuit is flexibly and adaptably designed for each installation and its needs, in collaboration with consultants, arquitects, etc.: only heating, only domestic hot water, heating and domestic hot water, one or more output circuits. Example: heating and domestic hot water production S
1
30 60
2
14
32
6
S
35
61 62
35 33 P 34
17
17
10b
S
A
36
B
10 12 14
61 1
62
2
1
63
10b
31
10a
32 6 S
15
15
E F
T
10a
65
32 36
15
10c 12
13
20
17 20
Boiler Manifold Plate heat exchangers Circulating pump Closed expansion vessel Automatic air venting Mixing valve Overpressure safety valve Water meter
30 31 32 33, 34, 36 61, 62 60, 65 A, B C D E, F
Controller Thermostat Temperature sensor Pressure switch, manometer and thermometer Gas filter and gas pressure governor Gas detection and and safety gas valve Heating flow and return Cold feed refilling Draining Hot water flow and return
C D
Hydraulic / gas / flues circuit • HYDRAULIC CIRCUITS INCLUDED DEPENDING ON USE: heating and/or domestic hot water - Heating (1 or several circuits). - Domestic hot water: with/without plate heat exchangers. - With/without mixing valve, with/without pumps. - Single/double pumps. • HYDRAULIC SAFETY DEVICES: - Large capacity automatic air venting, water pressure switch. - Overpressure safety valve/s and closed expansion vessel/s. - Anti-condensing control and flow switch (depending on boiler). • GAS CIRCUIT: gas manifold, gas filter, gas pressure governor (depending on case), cut-off valves (boiler and general), gas detection, manual reset cut-off valve (optional). • FLUES CHIMNEYS (optional: stainless steel, insulated).
Control / electricity Includes electrical cabinet with: • Electric safety devices for internal equipments. • Manual/automatic controls. • Active equipments, alarm signals. • Control (several options): - Included in ROOF TOP, with sequence of boilers, mixing valve control, domestic hot water (Legionella prevention in DHWS production). - Ready for external centralised control: B.M.S. or telecomputing • Power supply: 220 V single phase or, 380 V three-phase (live, N+Earthed). • Main switch outside the unit. • Alarm signals: general and detailed (boilers, pumps, water pressure, gas…). • External stop/start for the whole equipment.
Adisa roof top with domestic hot water buffer vessels • Possibility of ROOF TOP equipment with a special height (2.67 m.) for including domestic hot water buffer vessels (maximum up to 4,000 litres spread over several vessels). • Possibility of integrating: - Buffer vessel for domestic hot water production with boilers. - Buffer vessel for domestic hot water production with solar collectors. - Buffer vessel protection: expansion, titanium anodes, etc... - Plate heat exchangers: boilers and solar. - Pipes, cut-off valves, circulating pumps. - Solar control unit (according to regulations), with optional energy counter.
OPTION: THERMI PACK SKID PREFABRICATED COMPACT EQUIPMENT FOR INSTALLATION INSIDE BOILER ROOM • Same characteristics and advantages as ROOF TOP equipment, but installed indoors. • Design fully customizable according to the installation needs. • Possibility of installing several skids in series. • The boiler room where the skid is located must meet current regulations.
Manufacturing process of 1,800 kW Skids in our productive facilities.
Skid size (m)
Maximum power output
1.3 x 1.2 1.8 x 1.8 2.45 x 1.8 3.0 x 1.8 3.55 x 1.8 4.2 x 1.8 5.4 x 1.8
Up to 380 kW Up to 464 kW Up to 928 kW Up to 928 kW Up to 1,392 kW Up to 2,715 kW Up to 2,715 kW
THE INSTALLATIONS ADISA HEATING has almost 50 years experience working with consultants/designers and installation/maintenance companies in designing and making centralised heat production installations of high energy efficiency. • The ADISA ROOF TOP equipments installed in public buildings, sports facilities, offices,
hotels, shopping centres, official buildings and hospitals in countries such as Spain, France, Italy, Belgium, Portugal, England, Irland, Norway, Romania, Bulgaria, Ukraine, Egypt, Venezuela, Dominican Republic... are our best references.
RT10 RT20 RT25 RT30 RT35 RT40 RT55
kW < 380 < 464 < 928 < 928 < 1.392 < 2.715 < 2.715
RTH
Variable
ROOF TOP
Casing dimensions length x width
Power output
Model
02 / 2013
DIMENSIONS AND WEIGHTS Approx. max. weight (1) (without water) kg 664 1,300 2,100 2,300 2,700 3,300 4,150
m 1.3 x 1.2 1.8 x 1.8 2.45 x 1.8 3.0 x 1.8 3.55 x 1.8 4.2 x 1.8 5.4 x 1.8
Approx. max. weight (1) (with water) kg 793 1,980 2,550 2,965 3,350 3,735 5,250
Max. no. Boilers 1 2 2 2 3 4 4
Like RT10 to RT30, but with a special height, to include domestic hot water vessel
(1) Weights and water content vary depending on the internal equipment of each unit. 1
RT20
2
3
1
3
2
2
RT25
1 1 1
1
13
RT30
3
1 1
2 1 1
2
1
1
13
3
RT35
2
1
13
2
2
3
2 1 1
1 1
2 1 1
13
1
1 2 2
3 3
1
2
2
2
1 2 2
1
3
1 1
1
2
1
2
2 1 1 1
13:21
1
2
2 2
1
15/02/13
RT55
2
3 1
2
2
1
3
1 1 1
2 2
3 3
1 1
3 3
13
1
3
2 2
3 12 1
3 1
1
2
1
K
K
CMY
CMY
K
K CY
MY CMY
CMY
CY
MY
MY
CY
CM CY
CM
CM
MY Y
Y
Y
M
CM
M
Y C
M
M
C
C
FACTORY Arenys de Mar (Barcelona)
C
www.adisa.es
2
2
K
CY
CMY
MY
Y
CM
[email protected] [email protected]
M
BARCELONA HEADQUARTERS Tuset 8-10, 4º 08006 Barcelona - Spain Tel. +34 93 415 00 18 Fax +34 93 238 60 36
2 2
2
2
1
C
resum_carcasa_Gcal-folleto-b Model (1).pdf
resum_carcasa_Gcal-folleto-b Model (1).pdf 1 15/02/13 resum_carcasa_Gcal-folleto-b Model (1).pdf 1 15/02/13 13:21 13:21 resum_carcasa_Gcal-folleto-b Model (1).pdf 1 15/02/13 13:21
3 3
2
1
1
2 2
2 2
2
3
1 1 1
2 2
3 3
1
2
2
3
1
1 2 2
3 3
1. FIXED PANEL 2. HINGED DOOR 3. ACCESS DOOR
1
