Transcript
The original name for Hole Cutting Systems... Known and trusted Worldwide for Quality, Performance and Reliability
PUMA
PANTHER
COBRA
RHINO 2
RHINO 4
CM/127
CM/330/C
www.rotabroach.co.uk
RD130C
RD140
PUMA
PANTHER
Magnetic Drill
Magnetic Drill
Lightweight - ideal for use on site or in a workshop
Lightweight - ideal for use on site or in a workshop
Cuts holes up to 30mm diameter x 25mm deep
Cuts holes up to 40mm diameter x 50mm deep
800 watt motor
1100 watt motor
Feed capstan may be reversed for easy positioning in tight areas Controls mounted at the rear for better access 750 kgs magnetic adhesion
Feed capstan may be reversed for easy positioning in tight areas Variable speed - the right speed for the right diameter
Complete with 1/2”drill chuck
Automatic coolant bottle
Supplied with secure carrying case
Supplied with secure carrying case
PUMA
PANTHER
Puma Specifications
Panther Specifications
Model number
CM/300/1A / CM/300/3A
Model number
CM/125/1A / CM/125/3A
Motor specification
110v full load 7.8amps 800w 230v full load 4amps 800w
Motor specification
110v full load 11amps 1100w 230v full load 5amps 1100w
No load rpm
600 rpm
No load rpm
350 to 600 rpm
Max hole cutting capacity
30mm dia x 25mm deep
Max hole cutting capacity
40mm dia x 50mm deep
Overall dimensions
Height 420mm max Width 170mm Length 250mm
Overall dimensions
Height 510mm max Width 180mm Exc. bottle Length 265mm
Net weight
12.2 kgs
Net weight
14.6 kgs
Spindle bore
19.05 (3/4”)
Spindle bore
19.05 (3/4”)
Magnetic adhesion
750 kgs
Magnetic adhesion
750 kgs
Safety features
Electronic overload
Safety features
Clutch and electronic overload
taking hole cutting into the tightest corners
the small machine with power and stamina
Magnetic Drill
Cutting surface speed Meters/min 14
22
30
Cutter diameter/Material/RPM relationship. 18
50
65
The data listed below is for reference purposes only, and indicate potential starting conditions. It is the responsibility of the site operation manager to determine correct application requirements.
13
60 - 50
- 90
734
979
1469
514
1224
1224
2203
341
341
682
909
1364
682
477
1137
1137
2046
265
265
530
707
1061
530
371
884
884
1591
217
217
434
579
868
434
304
723
723
1302
32
255
159
159
318
424
637
53
318
318
223
530
530
955
19
153
95
95
191
255
382
32
191
191
134
318
318
573
15
118
73
73
147
196
294
24
147
147
103
245
245
441
Lower Upper Lower Upper Lower Upper
Aluminium 40 - 50 367 734
72
434
Lower Upper Lower Upper
Brass & Bronze 30 - 21 367
43
347
Lower Upper
Iron: cast (soft) 15 - 30
88
530
Lower Upper Lower Upper
cast (hard) 15
53
424
Material to be cut
cast (malleable)
114
682
88
68
73
546
115
122
95
734
191
73
159
588
260
5
217
- 30
318
-
265
3
409
24
341
high tensile 441
Clutch and electronic overload
367
1200 kgs
Safety features
- 18
19.05 (3/4”)
Magnetic adhesion
15
19.8 kgs
Spindle bore
stainless (free cutting)
Net weight
64
Height 570mm max Width 190mm Exc. bottle Length 300mm
29
65mm dia x 50mm deep
Overall dimensions
83
160 to 640 rpm
Max hole cutting capacity
38
No load rpm
138
110v full load 14amps 1400w 230v full load 6.0amps 1400w
64
Motor specification
188
CM/205/1A / CM/205/3A
87
Model number
230
COBRA
106
Supplied with secure carrying case
296
Automatic coolant bottle
136
Variable speed - the right speed for the right diameter
318
1200 kgs magnetic adhesion
the right speed for the right job
bring the drill to the work not the work to the drill
Steel: mild
Controls mounted at the rear for better access
26
Feed capstan may be reversed for easy positioning in tight areas
- 13
1400 watt motor
6
Cuts holes up to 65mm diameter x 50mm deep
stainless (heat resisting)
Drill on site or in a workshop
SPEEDS & FEEDS COBRA
Cobra Specifications
PETROL RAIL DRILLING UNITS Rhino 2
Rhino 4
2 stroke Stihl engine
4 stroke Honda engine
Worldwide Stihl service approval
Worldwide Honda service approval Lightweight
Lightweight
Highly portable with low noise level
Highly portable-ideal for use in remote locations
Robust and reliable
Robust and reliable
Clutch control Through spindle coolant
Clutch control
Integrated automatic throttle control
Through spindle coolant
Complies with EU & CARB emission regulations
Manual lever throttle activation
2 year motor conditional warranty
Each rail drilling machine is supplied with a coolant pump
RHINO 2
LUL approved Complete with lightweight carrying case & coolant pump
RHINO 4
Rhino 2 Specifications
Rhino 4 Specifications
Model number
RD07A
Model number
RD074
Motor type
Stihl 2 stroke
Motor type
Honda 4 stroke
Displacement (cm)
34.4
Displacement (cm)
49
Overload clutch
yes
Overload clutch
yes
Cutter speed (rpm) in no load working conditions
200
Cutter speed (rpm) in no load working conditions
167
Overall dimensions
Length 540mm over clamp Width 420mm Height 450mm
Overall dimensions
Length 540mm over clamp Width 420mm Height 420mm
Dry weight
18.5 kgs
Dry weight
18.5 kgs
Throttle activation
Manual lever
Throttle activation
Automatic feed
Through spindle coolant
yes
Through spindle coolant
yes
Coolant dispenser
Supplied
Coolant dispenser
Supplied
fast accurate hole cutting in the most remote locations
CM/127 Electric Rail Drill Lightweight and user friendly operation Powerful 1100w motor - easier, faster holes Variable speed control - the right speed for the right job Automatic coolant bottle - puts the lubricant in the right spot
LOCATORS & TEMPLATES Hole Centre Locators To ensure that the holes are correctly distanced from centre to centre, a hole centre location unit is available which fits on top of the rail and can quickly be secured by tightening two handles. Recesses in the plate are designed to accommodate the machine as it is lowered into position. These features provide complete accuracy when working in difficult and low light conditions.
Quick fix rail clamp for secure and easy attachment Twist drill attachments available
CM/127
Multi-form Templates Rotabroach multi-form templates are a faster, easier and more accurate system across the spectrum of rail forms simplifying track laying and maintenance work on railways and urban tramways all over the world. You just ‘dial’ the appropriate rail form, attach the machine to the rail and begin holecutting in the knowledge that the machine is rigidly and accurately positioned. With the Rotabroach system the need for individual templates is eliminated, saving time and expense. To move from one rail form to another, operators only have to release the centre screw, turn the template to the appropriate position and locate it on the dowels before re-tightening.
CM/127 Specifications Model number
CM/127/1 & CM/127/3
Motor specification
110v full load 11amps 1100w 230v full load 5amps 1100w
No load rpm
350 to 600 rpm
Max hole cutting capacity
40mm dia x 50mm deep
Overall dimensions
Height 320mm Width (including hand wheel) 180mm Maximum extension 640mm Minimum extension 620mm
Net weight
16.2 kgs
Spindle bore
19.05 (3/4”)
lightweight, powerful and extremely accurate
unique equipment for the complete system
CM/330/C
RD130C
Standard Air Power Air Power Atex approved II 2G T4 II D110˚C
Atex approved II 2G T4 II D110˚C
Atlas Copco Pneumatic motor, combining safety and reliability Mechanically activated permanent magnetic base
Atlas Copco Pneumatic motor for safety in hazardous areas Mechanically activated permanent magnetic base
Lightweight and portable
For safety, the machine is built with a high zinc alloy body for spark resistance. Moving components are manufactured in anti-corrosive materials
For use in any environment where an electricity supply is not available
Stainless steel spindle and guard for corrosion are manufactured for resistance in harsh environments
Designed for use in petro-chemical plants, offshore oil platforms and other hazardous environments
For use in any environment where an electricity supply is not available
Drill chuck attachment available
Designed for use in petro-chemical plants, offshore oil platforms and other hazardous environments Drill chuck attachment available
CM/330/C
RD130C
CM/330/C Specifications
RD130C Specifications
Model number
CM/330/C
Model number
RD130C
Overall dimensions
Height 540mm Width 185mm over handles Length 320mm over magnet handle
Overall dimensions
Maximum height 540mm Width 175mm over handles Length 370mm over magnet handle
Weight
16.6 kgs
Weight
20.6 kgs
Air consumption
13 Its/sec - 28 CFM @ 6.3 bar min
Air consumption
13 Its/sec - 28 CFM @ 6.3 bar min
Max hole cutting capacity
52mm dia x 50mm deep
Max hole cutting capacity
52mm dia x 50mm deep
Torque at max output
37Nm - 27Ibf.ft
Torque at max output
37Nm - 27Ibf.ft
RPM at max output
160 rpm
RPM at max output
160 rpm
powerful, safe and reliable
ACCESSORIES
RD140 Hydraulic Drilling Unit Hydraulic motor for underwater applications Stainless steel construction resists corrosion
Vacuum Pad The Vacuum Pad is the ideal accessory for use when drilling any non-ferrous material. Simply attach your Rotabroach magnetic drill to the steel plate provided and drill away.
Mechanically activated permanent magnetic base
The vacuum Pad has a powerful holding power, 368kgs at centre position (no vacuum pump required). Air supply required approx 4 cubic feet per minute and a minimum pressure of 70psi.
Drill chuck attachment available
Part number - DB121
Powerful and secure magnetic hold
RD140
Keyless Chuck The CM/330/C, RD130C and RD140 can be adapted to accept a 1/2" 3 jaw drill chuck. This chuck can be fitted to all drill units having a 5/8" - 16 UNS output spindle nose. Simply remove the bearing bracket, sleeve and arbor or any other fittings. Place the chuck spacer onto the spindle, screw the chuck tightly against the spacer and lock in position.
RD140 Specifications Model number
RD140
Hydraulic supply required
140 Bar (2050 psi)
No load rpm
630 rpm
Max hole cutting capacity
52mm dia x 50mm deep
Overall dimensions
Height 530mm max Width 180mm over handles Length 315mm over magnet handle
Model
Spacer
Chuck
RD130C
RD324
RD4189
Net weight
24.00 kgs
CM/330/C
RD324
RD4189
Spindle bore
19.05 (3/4”)
RD140
RD324
RD4189
manufactured for extreme environments
versatility and safety
ROTABROACH CUTTERS
Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4” pilot bore and can be used in most magnetic drills.
General engineering, construction and fabrication. <700 N/mm2 material hardness. Fully ground M2 high speed steel cutters
Standard Series Cutter 25mm cutting depth Part No. Ømm 11 SRC110 12 SRC120 13 SRC130 14 SRC140 15 SRC150 16 SRC160 17 SRC170 18 SRC180 19 SRC190 20 SRC200 21 SRC210 22 SRC220 23 SRC230 24 SRC240 25 SRC250 26 SRC260 27 SRC270 28 SRC280 29 SRC290 30 SRC300 31 SRC310 32 SRC320 33 SRC330 34 SRC340 35 SRC350 36 SRC360 37 SRC370 38 SRC380 39 SRC390 40 SRC400 41 SRC410 42 SRC420 43 SRC430 44 SRC440 45 SRC450 46 SRC460 47 SRC470 48 SRC480 49 SRC490 50 SRC500 51 SRC510 52 SRC520 Rotabroach Cutter
Conventional Twist Drill
Slug
“The Energy Saver”
Entire area converted to chips
Rotabroach Pilot Pins Part No. Range. SRA3057 11-12mm SRA25 13-52mm
Long Series Cutter 50mm cutting depth Part No. Ømm SRCL120 SRCL130 SRCL140 SRCL150 SRCL160 SRCL170 SRCL180 SRCL190 SRCL200 SRCL210 SRCL220 SRCL230 SRCL240 SRCL250 SRCL260 SRCL270 SRCL280 SRCL290 SRCL300 SRCL310 SRCL320 SRCL330 SRCL340 SRCL350 SRCL360 SRCL370 SRCL380 SRCL390 SRCL400 SRCL410 SRCL420 SRCL430 SRCL440 SRCL450 SRCL460 SRCL470 SRCL480 SRCL490 SRCL500 SRCL510 SRCL520 SRCL530 SRCL540 SRCL550 SRCL560 SRCL570 SRCL580 SRCL590 SRCL600 SRCL610 SRCL620 SRCL630 SRCL640 SRCL650
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
Rotabroach Pilot Pins Part No. Range. RA3013 12mm SRA50 13-65mm
Extra Long Series Cutter 110mm cutting depth Part No. Ømm
RCX200 RCX210 RCX220 RCX230 RCX240 RCX250 RCX260 RCX270 RCX280 RCX290 RCX300 RCX310 RCX320 RCX330 RCX340 RCX350 RCX360 RCX370 RCX380 RCX390 RCX400 RCX410 RCX420 RCX430 RCX440 RCX450 RCX460 RCX470 RCX480 RCX490 RCX500 RCX510 RCX520 RCX530 RCX540 RCX550 RCX560 RCX570 RCX580 RCX590 RCX600 RCX610 RCX620 RCX630 RCX640 RCX650
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
Rotabroach Pilot Pins Part No. Range. RA3092 20-65mm
over 30 years experience
General engineering, construction and fabrication, railway and aerospace. <850 N/mm2 material hardness.
General engineering, construction and fabrication, and aerospace. >850 N/mm2 material hardness. Carbide tipped cutters
M42 high speed steel cutters
M42 Standard Series Cutter 25mm cutting depth Part No. Ømm SRCV130 SRCV140 SRCV150 SRCV160 SRCV170 SRCV180 SRCV190 SRCV200 SRCV210 SRCV220 SRCV230 SRCV240 SRCV250 SRCV260 SRCV270 SRCV280 SRCV290 SRCV300 SRCV310 SRCV320 SRCV330 SRCV340 SRCV350 SRCV360 SRCV370 SRCV380 SRCV390 SRCV400
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Long Series Cutter 50mm cutting depth Part No. Ømm SRCVL130 SRCVL140 SRCVL150 SRCVL160 SRCVL170 SRCVL180 SRCVL190 SRCVL200 SRCVL210 SRCVL220 SRCVL230 SRCVL240 SRCVL250 SRCVL260 SRCVL270 SRCVL280 SRCVL290 SRCVL300 SRCVL310 SRCVL320 SRCVL330 SRCVL340 SRCVL350 SRCVL360 SRCVL370 SRCVL380 SRCVL390 SRCVL400
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Rotabroach M42 SRCV / SRCVL cutters are manufactured with advanced multiple edge geometry which ensures efficient swarf evacuation and a reduction in energy consumption.
Rotabroach Pilot Pins Part No. Range. SRA25 13-40mm
Rotabroach Pilot Pins Part No. Range. SRA50 13-40mm
• High quality super micro-grain carbide tips for long tool life. • Smooth cutting triple edge tooth geometry reduces vibration. • Profiled flute for rapid swarf evacuation. • Suitable for most materials and applications.
TCT Series Cutter 35mm cutting depth Part No. Ømm
CWC14 CWC15 CWC16 CWC17 CWC18 CWC19 CWC20 CWC21 CWC22 CWC23 CWC24 CWC25 CWC26 CWC27 CWC28 CWC29 CWC30 CWC31 CWC32 CWC33 CWC34 CWC35 CWC36 CWC37 CWC38 CWC39 CWC40 CWC41 CWC42 CWC43 CWC44 CWC45 CWC46 CWC47 CWC48 CWC49 CWC50 CWC51 CWC52
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
Rotabroach Pilot Pins Part No. Range. SRA90 14-17mm 18-52mm RA3098
TCT Series Cutter 50mm cutting depth Part No. Ømm
CWCL14 CWCL15 CWCL16 CWCL17 CWCL18 CWCL19 CWCL20 CWCL21 CWCL22 CWCL23 CWCL24 CWCL25 CWCL26 CWCL27 CWCL28 CWCL29 CWCL30 CWCL31 CWCL32 CWCL33 CWCL34 CWCL35 CWCL36 CWCL37 CWCL38 CWCL39 CWCL40 CWCL41 CWCL42 CWCL43 CWCL44 CWCL45 CWCL46 CWCL47 CWCL48 CWCL49 CWCL50 CWCL51 CWCL52 CWCL53 CWCL54 CWCL55 CWCL56 CWCL57 CWCL58 CWCL59 CWCL60 CWCL61 CWCL62 CWCL63 CWCL64 CWCL65
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
Rotabroach Pilot Pins Part No. Range. SRA50 14-17mm 18-65mm RA356
TCT Rail Series Cutter 25mm cutting depth Part No. Ømm
SCRWC18 SCRWC19 SCRWC20 SCRWC21 SCRWC22 SCRWC23 SCRWC24 SCRWC25 SCRWC26 SCRWC27 SCRWC28 SCRWC29 SCRWC30 SCRWC31 SCRWC32 SCRWC33 SCRWC34 SCRWC35 SCRWC36
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Rotabroach Pilot Pins Part No. Range. SRA25 18-36mm
of manufacturing excellence
MINI CUTTERS For perfect holes in sheet metal, pipes & plastic
Metric Mini-Cutters
*Kit Sizes
For holes in materials up to 8mm thick. Arbors fit 3/8” and 1/2” drill chucks. Part No RCM060 *RCM080 RCM090 *RCM100 RCM110 *RCM120 RCM130 *RCM140 RCM150 *RCM160 RCM170 *RCM180 RCM190 *RCM200
Diameter 6mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm
21mm 22mm 23mm 24mm 25mm
For holes in materials up to 1/4” thick. Arbors fit 3/8” and 1/2” drill chucks. Part No
Diameter 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4”
13/16” 7/8” 15/16” 1” 1.1/16” 1.1/8” 1.3/16” 1.1/4” 1.3/8” 1.1/2”
Precision ground teeth for clean, accurate entry into sheet metal.
Annular cutting action requiring low thrust with less burring on exit.
Low power consumption gives long life to cordless drills.
Mini-Cutter Kits Mini-Cutter kits are supplied in a handy plastic case complete with arbor, pilot and hexagon key.
Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics.
Imperial Kit (RK601) with 7 cutters in 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4” diameter sizes and arbor for 1/2” drill chuck.
Mini-Cutters produce holes by removing a ‘disc’ of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate.
Imperial Kit (RK602) as above but with arbor for 3/8” drill chuck.
Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills
For holes in materials up to 1/2” thick. Arbors fit 1/2” drill chucks. RCEM812 RCEM875 RCEM937 RCEM1000 RCEM1062 RCEM1125 RCEMM1187 RCEM1250 RCEM1375 RCEM1500
Diameter Arbor for 1/2” Arbor for 3/8” chuck Pilot for RA116/RA117 Dished Stop Washer Plain Stop Washer Grub Screw Compression Spring Arbor Body RA116 Arbor Body RA117 Hex Wrench 1/8” A/F Arbor-1/2” chuck 21+Dia Pilot for RA118
For perfect holes in sheet metal, pipes & plastic.
Imperial Mini-Cutters
RCEM250 *RCEM312 *RCEM375 *RCEM437 *RCEM500 *RCEMM562 *RCEM625 RCEM687 *RCEM750
Part No RA116 RA117 RA327 RA328 RA329 RA464 RA3008 RA3048 RA1010 RD427 RA118 RA3063
MINI CUTTERS
For holes in materials up to 12mm thick. Arbors fit 1/2” drill chucks. RCM210 RCM220 RCM230 RCM240 RCM250
New geometry for harder materials
Accessories
Mini-Cutters have multiple teeth and an annular cutting action with no ‘dead centre’ area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work.
Metric Kit (RK603) with 7 cutters in 8mm, 10mm, 12mm, 14mm, 16mm, 18mm and 20mm diameter sizes and arbor for 1/2” drill chuck. Metric Kit (RK604) as above but with arbor for 3/8” drill chuck. Arbor (RA118) for use with Mini-Cutters from 21mm + diameter in 1/2” drill chucks.
Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel, they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.
perfect holes everytime
Holes for electrical installations Overlapping holes Cleaner holes in pipes
ACCESSORIES
90˚ HSS Countersinks Manufactured from super tough high speed steel. Suitable for all types of portable drills with 3/4" shank. 3 cutting edges, smooth chamfering, high surface finish. Part No
Range
CK30
Countersinks holes up to 30mm dia.
CK40
Countersinks holes up to 40mm dia.
CK55
Countersinks holes up to 55mm dia.
90˚ Piloted HSS Countersinks Manufactured from super tough high speed steel. Suitable for all types of portable drills with 3/4" shank. 3 cutting edges, smooth chamfering, high surface finish. Manufactured with pilot bore for greater stability and accuracy. Part No
Range
RPC201
Countersinks holes up to 40mm dia.
RPC100
Countersink kit includes pilots for 14mm, 18mm & 22mm holes.
90˚ Piloted TCT Countersinks Manufactured from super tough high speed steel. TCT tipped for greater tool life and harder materials. Suitable for all types of portable drills with 3/4" shank. 3 cutting edges, smooth chamfering, high surface finish. Manufactured with pilot bore for greater stability and accuracy. Part No
Range
RPCC201
Countersinks holes up to 40mm dia.
RPCC100
Countersink kit includes pilots for 14mm, 18mm & 22mm holes.
• Various size countersink pilot pins are available on request. • Countersinks are available in different angles on request.
precise engineering for a quality finish
ACCESSORIES
Morse Taper Arbors Morse Taper
Shank
D.O.C.
2
19.05mm
50mm
CA130
3
19.05mm
50mm
CA1375
3
19.05mm
75mm
CA330
3
32mm
50mm
CA3375
3
32mm
75mm
CA3310
3
32mm
100mm
CA140
4
19.05mm
50mm
CA1476
4
19.05mm
75mm
CA340
4
32mm
50mm
CA3475
4
32mm
75mm
CA1575
5
19.05mm
75mm
Part No CA120
CA3510
5
32mm
100mm
CA1510
5
19.05mm
100mm
• All Morse taper adapters come with coolant adaptors. • Other fittings and adaptors are available on request.
the complete range
ACCESSORIES
Extension Arbors When extended reach is necessary Rotabroach offer extension arbors of various lengths. For use when the face of the hole to be cut is lower than the surface on which the machine is standing. Extension arbors are manufactured with 3/4" (19.05mm) shank fittings which are accepted in almost all magnetic drill stands. Part No
Extension (mm)
RD2091
30
RD2090
50
RD2092
75
RD2102
100
RD2103
150
RD2104
200
RD2105
250
Twist Drill Adaptors The Rotabroach Twist Drill Adaptor is designed for use with stublength drills from 4mm to 12mm diameter. It fits securely into the bore of the integral arbor ensuring maximum concentricity. Secured in place with 2 grub screws this item is easily fixed and very simple to use. It gives the magnetic drill a far greater degree of versatility at an economical cost. Part No
Size (mm)
RD2003/040
4
RD2003/050
5
RD2003/060
6
RD2003/070
7
RD2003/080
8
RD2003/090
9
RD2003/100
10
RD2003/110
11
RD2003/120
12
All items are subject to stock availability.
no hole too difficult
ACCESSORIES
Swarf Stick The amazing Rotabroach Swarf Stick is a must have addition to help keep your work area tidy in any metal working environment. This handheld lightweight tool works like a magic wand - simply push in the handle and place the tool over the ferrous metal chipping’s and swarf and it will attract them to itself, holding them until you withdraw the handle to release the magnetic force. Part number - CT/010/100
Adaptors Want to use a Genuine Rotabroach cutter but can't because you have a machine with a quick fit shank system?
Think again! Rotabroach supply adaptors which convert standard 3/4" (19.05mm) conventional cutters into the desired quick fitting system.
“Easy to use and economical these tools enable you to use a genuine Rotabroach Cutter and never have to settle for any other alternative.”
Part No
Conversion
CQA01
Fein Quick-In shank
CQA02
One-touch shank
always use genuine rotabroach
ACCESSORIES
Pipe Adaptor Kit With the addition of a simple adaptor kit, Rotabroach machines can be used for cutting holes in most pipes. Two plates simply attach to the magnet base providing a positive non-slip position which assures central hole location. The pipe adaptor kit is suitable for all pipes with a diameter of 60mm upwards. Part number - RD2311
60 - 100mm Pipe Diameters
100mm Diameters & Above
Cutting Lubricant Rotabroach Cutting Fluid has been specifically formulated to extend cutter life and improve cutting performance. You simply pull out the nozzle and apply the fluid directly into the reservoir on the Rotabroach machine or directly into the machine coolant bottle. Part No
Volume (ltrs)
RD208
1
RD229
5
Slick-StockTM Lubricant is softer than other stick lubricants for easy application, providing superior adhesion to the tool, assuring thorough coverage. Use with ferrous and non-ferrous materials. Part No
Volume (oz)
RD40068
1.68
RD40065
16
• Bio-degradable cutting oil available on request.
taking hole cutting to another dimension
Rotabroach...The original name for Hole Cutting Systems
How to find us... M 1
M1 NORTH & LEEDS
OW AD E M
NK BA
RD
A6
10
5
N
J34
L L RD
HA ME A
W DO
AY W OR OT M
MEADOWHALL INTERCHANGE
WA Y
TO M18 & M1 SOUTH
1
M
A6
17
SHEFFIELD CITY CENTRE
D
A631
OWHALL
A63 1 RD
8
MEAD
SH EF FIE L
9
18
8 617 DA R D IEL EFF SH
J34
MEADOWHALL SHOPPING MALL A6
A6178 ROTHERHAM
Directions
design : brightstar-creative.com : 0114 276 3736
From the North, exit the M1 at junction 34. Take the 3rd exit off the roundabout. At the next follow the signs for the A6178 to the city. OSL Group is situated on the left hand side 50 yards after the 1st set of traffic lights after the Premier Lodge and directly behind the Jet petrol station. From the South, exit the M1 at junction 34. Take the 2nd exit off the roundabout onto the A6178. OSL Group is situated on the left hand side 50 yards after the 1st set of traffic lights after the premier lodge and directly behind the Jet petrol station. From the East, follow the A57 to Worksop. Stay on the A57 until junction 31 of the M1. Go North on the motorway until you arrive at junction 34. Exit the M1 and take the 2nd exit off the roundabout onto the A6178. OSL Group is situated on the left hand side 50 yards after the 1st set of traffic lights after the premier lodge and directly behind the Jet petrol station. From the West on the M62, make way to the M1and then exit at junction 34. Take the 3rd exit off the roundabout. At the next follow the signs for the A6178 to the city centre. OSL Group is situated on the left hand side 50 yards after the 1st set of traffic lights after the premier lodge and directly behind the Jet petrol station.
Rotabroach, Imperial Works, Sheffield Road,Tinsley, Sheffield S9 2YL, United Kingdom Tel +44 (0)114 2212 510 Fax +44 (0)114 2212 563 E-mail:
[email protected] Web site: www.rotabroach.co.uk A Division of the OSL Group of Companies
