Preview only show first 10 pages with watermark. For full document please download

Rotary Adaptor - Inkmachines.com

   EMBED

Share

Transcript

Manual for Rotary Adaptor Read before use! The Rotary Adaptor is a power converter that enables rotary tattoo machines to function with the Eikon EMS 300 / 250 power supplies. With the Rotary Adaptor active the duty will not come up to 99% which causes the power supply to shut down. Both rotary machines and coil machines will work by flipping the switch on the rotary adaptor to the corresponding machine of use. The duty and CPS readings on the display of the power supply will be correct with coil machines but not for rotary machines. Only voltage indication is needed for rotary machines. Connections Connect the supplied cable from the power outtake on the EMS 300 / 250 (where you normally have your clipcord connected) to the power input of the rotary adaptor marked Power. Connect your clipcord or RCA cable to the Machine output of the rotary adaptor marked Machine. Connect machine of your choice and flip the switch on the rotary adaptor according to machine type. NOTE: The Rotary Adaptor is fitted with a 2,5A fuse for overload and short circuit protection. If the Rotary Adaptor ceases to function open the enclosure and replace the fuse with a new. 1 Warranty This product includes a 12 month warranty from the date of purchase. The warranty applies to factory faults and not to wear of any components caused by normal or abnormal use. The warranty is void if: 1. 2. 3. 4. Input voltage above 20 volts have been applied to the Rotary Adaptor. If the Rotary Adaptor have been autoclaved or cleaned in a ultrasonic cleaner. Components have been damaged by misuse or carelessness. Components have been manipulated. Specifications Input voltage Connections Fuse Phono cable Weight Dimensions LxBxH 0 - 20 volt DC (max. 20 volt DC) 2 x 6,35mm ( ΒΌ ) Phono mono plugs 5x20mm 2,5A 1,5 mm2 (included in box) 180 grams 70 x 60 x 30 mm 2