Transcript
Virtual Fiber™ Outdoor Wireless TCP/IP Transport
RPM-POE-INJ-DS Industrial Grade DC-DC Power-overEthernet (PoE) Power Injector The Redline industrial grade PoE power injector is specifically designed for deployment of RDL-3000 wireless systems in the harsh industrial environment of underserviced, off-grid and isolated locations reliant primarily on reliable DC power. Purpose-built to meet the tough operating conditions of oil & gas, military, and utility applications, Redline’s PoE power-sourcing equipment (PSE) unit supports 12 / 24 / 48 VDC power systems.
SYSTEM AT A GLANCE Industrial PoE compatible with all RDL-3000 wireless systems Compact footprint with hardened aluminum shell
The durable aluminum shell, high quality connectors, and proven electrical design guarantee reliable operation under the most demanding operating conditions.
10/100Base-T Ethernet IEEE 802.3at/af compliant
FEATURES AND BENEFITS
-40 to 75 °C operating temperature using dynamic and thermal dissipation (no moving parts)
❏❏
❏❏ ❏❏
❏❏
Reliable operation for sites where the primary or preferred power source is DC (solar panels/battery) Power options (e.g. A/B battery banks) Supports negative supply operation with TELCO -48 VDC wiring for communications and power panels Deploy with any compatible PoE powered device (PD) including IP cameras, IP access controls, and wireless access points (AP)
10 to 60 VDC input range with redundant DC inputs Transient voltage suppression for all input/output connections DIN rail, panel or wall mount
PRODUCT COMPLEMENTS The Redline PoE is fully compatible with all Redline RDL-3000 family base stations and wireless terminals.
UNIFIED GLOBAL SOLUTIONS Redline’s patented UWT™ technology provides a truly unified wireless networking solution—across the spectrum, across your company and across the globe—enabling secure, reliable, high-speed connectivity to people and smart devices everywhere.
POWERFUL. VERSATILE. RELIABLE.
PoE SPECIFICATIONS Interfaces
1x Terminal block (screw down): DC power input, redundant DC power input 2x RJ-45(f) shielded ports: Ethernet, PoE 2x LED Indicators: Power, at/af mode, over-load, short-circuit, input voltage out-of-range, over-temperature
Compliance Safety1: CSA/UL C22.2 60950 to +75° C (167° F) EMI: FCC Part 15 Subpart B Class A, EN 55022 CISPR22 Class A
Network Connection
10/100Base-T Ethernet (RJ-45)
Interoperability
Type 2 – Supply 30 W over two pairs
Input Voltage
10 to 60 VDC
EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8
Input Power Cabling
12 to 16 AWG solid or stranded wire
Shock1: IEC 60068-2-27
Input Voltage Protection
Over-voltage and reverse polarity
Freefall1: IEC 60068-2-32
Input to Output Isolation
2121 VDC min; 1500 VAC min
Hazardous locations1: UL1604,
PoE Powering Schemes
Alternative B – Pairs 4/5 & 7/8
CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2; Category 3), CE (ATEX)
PoE Output Voltage
52 VDC +/- 3%
PoE Output Power
30 Watts max. (25 Watts @ 12 VDC input)
PoE Surge Protection
Ethernet: all wires
Management
Unmanaged
Operating Temp
-40 to 75 °C (-40 to 167 °F)
Humidity
5 to 95% non-condensing
Dimensions
Enclosure
Aluminum IP-40 (1 mm objects)
111.5 x 32.5 x 137 mm (4.39 x 1.28 x 5.40 in)
Power Consumption
>80% efficiency @ 21°C (71° F)
Weight
Vibration1: IEC 60068-2-6
PoE: 802.3u 100BaseTX, 02.3af / 802.3at
Physical Attributes
360 g (0.8 lbs)
All specifications are subject to change without notice. 1. Availability restricted by regional regulations or product options
Model PS-DCDC-POE-IND-01
DRAWINGS 33.5 (1.319)
112 (4.409)
136 (5.354)
Dimensions are in millimeters (inches)
302 Town Centre Blvd. Markham, ON L3R 0E8 Canada
w rdlcom.com t +1.905.479.8344 e
[email protected] tf +1.866.633.6669
20150311 RPM-POE-INJ-DC © 2015 Redline Communications Inc. All rights reserved.
