Transcript
INSTALLATION MANUAL
SWITCH PANEL OPTION HANDSET
RS-140 RS-141
Note: For operation of the units, refer to the N-8000 series operating instructions.
1. GENERAL DESCRIPTION The RS-140 is a substation to be connected to the Substation Interface Unit. The RS-141 is designed exclusively for indoor-use in combination with the RS-140. It also features handset conversation with the RS-140. Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
2. CONNECTIONS
2.1. Substation Interface Unit and RS-140 Switch Panel Connections Connect the cables from the RS-140 to the Substation Interface Unit using the removable terminal plug.
2.2. RS-140 Switch Panel and Speaker Connections Substation interface unit
Brown Red
3P removable terminal plug (supplied with the Substation interface unit)
Orange
2-core shielded cable
RS-140 Brown (A) Red (B) Orange (C)
Note Cut out the unused Wire (purple) to avoid short-circuiting.
Yellow (C+) Green (B+) Blue (A+) N.C.
2-core shielded cable
Purple (H)
Blue (COM) Green (HOT)
High-impedance speaker (Impedance: 600 Ω or more) 133-21-945-20
2.3. RS-140, RS-141, and Speaker Connections Substation interface unit
3P removable terminal plug (supplied with the Substation interface unit)
Brown Red RS-140
Orange Brown (A) Red (B) Orange (C) 2-core shielded cable
Yellow (C+) Green (B+) Blue (A+)
N.C.
Purple (H) 2-core shielded cable
RS-141 Brown (A) Red (B) Orange (C) Yellow (C+) Green (B+) Blue (A+)
Green (HOT) Purple (H) Blue (COM) High-impedance speaker (Impedance: 600 Ω or more)
2-core shielded cable
Note Cut out unused wires to avoid short-circuiting.
3. INSTALLATION 3.1. RS-140 3.1.1. Dimensional diagram [RS-140]
[Mounting bracket (Supplied with the RS-140)]
83.5
115
68.5
Unit: mm
70 200 or less 12.3
16.3
Note When using the PA paging function, keep the switch panel as far away from the PA paging speaker as possible to avoid acoustic feedback. 3.1.2. In-wall mounting using an electrical box Mount the RS-140 to the YC-801 Flush-mount box mounted in the wall. Accessory screws
Wall surface
The RS-140 come with 2 types of screws to match the box screw threads: M4 x 30 and UNC No. 6-32 x 30. For the electrical box provided with unified threads, use the UNC No. 6-32 x 30.
Machine screw M4 x 30 (supplied with the RS-140)
83.5 mm UNC No. 6-32 × 18 (supplied with the RS-140) YC-801 Flush-mount box Mounting bracket (supplied with the RS-140)
RS-140
3.1.3. On-wall mounting using a wall-mount box Attach the RS-140 to the YC-802 Wall-mount box installed on a wall. Accessory screws
Wall surface
The RS-140 come with 2 types of screws to match the box screw threads: M4 x 30 and UNC No. 6-32 x 30. For the electrical box provided with unified threads, use the UNC No. 6-32 x 30.
Machine screw M4 x 30 (supplied with the RS-140) RS-140 83.5 mm
YC-802 Wall-mount box Mounting bracket (supplied with the RS-140)
UNC No. 6-32 × 18 (supplied with the RS-140)
3.2. RS-141 Mount the option handset to an electrical box mounted in the wall. Wall surface
[Dimensional diagram] 116 46
Unit: mm 71 48
200 or less
83.5 115
YC-302 2-gang electrical box (option)
220
Machine screw M4 x 25 (supplied with the RS-141)
Accessory screws
RS-141
The RS-141/191/481 comes with 2 types of screws: M4 x 25 and UNC No. 6-32 x 18. For the electrical box provided with unified threads, use the UNC No. 6-32 x 18.
2. SPECIFICATIONS [RS-140] Call Button Privacy Button Indicator
Wiring Transmission Range Operating Temperature Finish
Dimensions Weight Accessory Applicable Box
Momentary Latching When called: Status indicator (red) flashing In conversation: Status indicator (red) lit In privacy: Privacy indicator (red) lit 2-core shielded cable 500 m/ø0.5 mm (AWG24), 800 m/ø0.65 mm (AWG22), 1300 m/ø0.9 mm (AWG19) 0 to +40°C Panel: Stainless steel, hairline Call button: Resin, red Privacy button: Resin, white 70 (w) x 115 (h) x 28.6 (d) mm 80 g Mounting bracket ... 1, No. 6-32 UNC x 18 ... 2, Machine screw M4 x 30 ... 2, No. 6-32 UNC x 30 ... 2 Flush-mount box: YC-801 (option) Wall-mount box: YC-802 (option)
[RS-141] Handset Receiver Handset Microphone Wiring Handset Receiver Volume Control Operating Temperature Finish Dimensions Weight Accessory Applicable Box
Dynamic type Electret condenser type 2-core shielded cable Slide volume Maximum attenuation level: 12 – 18 dB 0 to +40°C ABS resin, pale white 116 (w) x 220 (h) x 71 (d) mm 350 g No. 6-32 UNC x 18 ... 4, Machine screw M4 x 25 ... 4 2-gang electrical box: YC-302 (option)
Traceability Information for Europe (EMC directive 2004/108/EC) Manufacturer: Authorized representative: TOA Corporation TOA Electronics Europe GmbH 7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo, Japan Suederstrasse 282, 20537 Hamburg,Germany
URL: http://www.toa.jp/
