Transcript
Ansaldo STS USA
Highway Crossing Equipment
RSE-5C5 Rev. 3-15
Highway Crossing Gate Arm Counterweights General Description ASTS USA provides a wide variety of counterweights for most gate arms to ensure proper balance in all arm positions, and to minimize loads on the gate mechanism. Weight kits are available for crossing gates and exit gates. Weight kits are available for the full range of arm lengths, from 12’ to 40’ (3.65 m to 12.2 m) arms for crossing gate applications and up to 32’ (9.75 m) for exit gates). The 47 lb. (21.3 kg) rectangular or “oblong” weights shift the weight further out on the arm, thus allowing the installation of a lower total weight package at the end of the arm. Kits consist of a sufficient number of weights to balance the respective arm. Also available from ASTS USA are extension arms for the weights to help the balance adjustment, and a stud plate kit for attaching the weights to the gate arm.
Order No. X46740163 X46740165 X46740166 X46740167 X46740169
Order No. X46740808 X46740809 X46740810 X46740811 X46740812 X46740813
Order No. M46712301 N451484-2403 X46700001
*All dimensions are approximate. Ordering Information
• • •
Refer to ordering tabulations below for weight kit part numbers. Make sure to order correct weight kits per the application: Crossing or exit gates. Contact your ASTS USA Account Executive to order special weight configurations not shown in the tabulation.
Oblong Weight Kits for Model 95 Crossing Gates Application Qty. of Weights 12'-18' Gate Arm 3 19'-23' Gate Arm 5 24'-29' Gate Arm 6 30'-32' Gate Arm 7 33'-40' Gate Arm 10 Oblong Weight Kits for Model 95 Exit Gates Application Qty. of Weights Notes 12’-18’ Gate Arm 5 (1) 19'-23' Gate Arm 8 (1) 24’-26’ Gate Arm 9 (1) 27’-29’ Gate Arm 10 (1) 30’-32’ Gate Arm 11 (1) 33'-40' Gate Arm 13 (1) Note (1): Includes extensions arms (part number N451484-2403)
12’ = 3.66 m 15’ = 4.57 m 16’ = 4.88 m 18’ = 5.49 m 19’ = 5.79 m 21’ = 6.40 m 22’ = 6.70 m 23’ = 7.01 m 24’ = 7.31 m 26’ = 7.92 m 27’ = 8.23 m 29’ = 8.84 m 30’ = 9.14 m 32’ = 9.75 m 33’ = 10.05 m 36’ = 10.97 m 37’ = 11.27 m 40’ = 12.19 m 44’ = 13.41 m 36 lbs. = 16.33 kg. 47 lbs. = 21.32 kg.
Misc. Components Counterweight, Oblong (47 lb) Counterweight Extension Arm Stud Plate for counterweight mtg.
To order, call 1-800-652-7276
www.ansaldo-sts.com RSE-5C5, p. 1
RSE-5C5, p. 2
