Transcript
RUBY-400
Four-Channel Main Station
FEATURES ■ Four individual communication channel ■ Four individual IFB outputs ■ Individual channel adjustments: Each channel has individual volume control and null adjustments RUBY-400 is the main station of an intercom system with built-in power supply. It provides 4 individual channel and 4 independent IFB outputs. Each channel has independent power supply output
■ Supports ALL-TALK function (communication with all substations simultaneously) ■ Supports ANNOUNCE function
and short-circuit protection. It can support up to 20 sub-stations.
■ Supports Multi Program Source monitoring
Featuring powerful functions, perfect voice and simple operation,
■ Supports Link function
RUBY- 400 is ideal for studio, master control, OB vehicle,
■ Supports MIC gain adjustment ■ Individual channel power supply with short-circuit protection
entertainment, education, and enterprise.
BLOCK DIAGRAM
INTERCOM
www.ogdentec.com
Technical Support:
[email protected]
51
RUBY-400
Four-Channel Main Station
APPLICATION DIAGRAM
RUBY
RUBY
INTERCOM
RUBY
52
Ogden Technology Corporation
An Expert in Signal Management
RUBY-400
Four-Channel Main Station
FRONT VIEW
RUBY-400
Channel power short-circuit LED indicator Power short-circuit reset Power LED indicator Headset I/O MIC input MIC/headset selector MIC input Gain adjustment Link function All-talk function Announce function Listen function Talk function Call function
14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
All IFB function Individual IFB function IFB output volume control Speaker switch Main communication volume control Speaker Main program output volume control Side tone control Listen volume control Balance adjustment Individual program output volume control IFB input volume control
REAR VIEW
1. Power switch 2. AC input 3. IFB program input 4. 4 individual IFB output 5. 4 groups of individual channel interface 6. Terminal switch ON: no external sub-station OFF: has external sub-station 7. ANNOUNCE output
www.ogdentec.com
INTERCOM
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
8. Main program input 9. AUTO-Call Function selection switch 10. AUTO-Talk Listen Function selection switch 11. Talk/Latch Disable Function selection switch 12. Prgm Intrpt Function selection switch 13. Line Length Function selection switch 14. Prgm On/Off Function selection switch 15. Auxiliary interface 16. HOT MIC output (external IFB device interface)
Technical Support:
[email protected]
53
RUBY-400
Four-Channel Main Station
SPECIFICATIONS Mechanical Width…………………………………………19 in. (483 mm) Height…………………………………………2RU (88 mm) Depth…………………………………………5.7 in. (145 mm)
Impedance…………………………………1 kΩ Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz
Power Supply………………………………80 ~ 260 V AC Power Consumption………………………50 W
Main Program Source Input Connector……………………………………XLR (×1) Input Level Range………………………-10 ~ 0 dBu Impedance…………………………………>10 kΩ Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz
Environmental
Line Output (Announce)
Operating Temperature…………………32° ~ 104° F (0° ~ 40° C) Relative Humidity…………………………10% ~ 90%
Connector……………………………………XLR (×1) Output Standard Level…………………0 dBu Impedance…………………………………600 Ω Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz
Electrical
Intercom Channel Impedance…………………………………200 Ω S/N Ratio………………………………………>70 dB Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz Headset Input Connector……………………………………3.5 mm Phone Jack Gain……………………………………………+49 dB Impedance…………………………………1 kΩ Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz
Line Output (IFB) Connector……………………………………XLR (×4) Impedance…………………………………100 Ω Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz Speaker Output Impedance…………………………………8 Ω Frequency Response……………………±2 dB, 150 Hz ~ 18 kHz Power…………………………………………5 W
INTERCOM
MIC Input
54
Connector……………………………………XLR (×1) Gain……………………………………………+49 dB
ORDERING INFORMATION RUBY-400 Four-channel main station
Ogden Technology Corporation
An Expert in Signal Management
