Transcript
RV-330LB
※ Safety precautions included in this manual are intended to ensure your safety and prevent property damage. Read them carefully before using the product. ※ The product's functions and design features may change without prior notice for quality and functionality improvement purposes.
Precautions Proper Product Use ☞ Whenever you change the mounting position of the product, adjust the camera angle and check the video recording to ensure accurate video capturing. ☞ Excessively dark window tinting can hinder normal video recording. ☞ Use the power cable provided by the manufacturer to ensure normal functionality. ☞ Viewing or operating the product while driving can lead to an accident. Use the product only while the vehicle is stationary. ☞ This product's cameras may not be able to record smooth images in the event of a sudden change in the brightness level (such as when entering a tunnel) or under extreme conditions such as shooting directly into the midday sun and shooting in the darkness of the night with no sufficient light sources in the vicinity. ☞ Certain impact events may not be severe enough to trigger video recording. ☞ In the event of an accident, images may not be recorded if the product has been damaged or the power supply has been disrupted. ☞ Product damage due to an accident or any other cause may result in failure to record video data and/or file errors. ☞ Unauthorized disassembly, repair, and modification of the product may lead to product damage and/or malfunction. The consumer is solely responsible for any product defect or issue arising thereof. ☞ Liquids and metallic objects entering inside the product can pose electric shock, fire, and electric leakage hazards. If this occurs, turn off the product, unplug the power cable, and contact the service center.
Proper micro SD Card Use ☞ Insert/remove the micro SD card only after powering the main unit off. Inserting/removing the micro SD card while the unit is powered on can cause serious errors. In addition, removing the micro SD card while recording is in progress can corrupt recording data and damage the card itself. ☞ Format the micro SD card and perform a virus check at least once a week to prevent potential data recording failures. ☞ Use authorized micro SD cards only. ☞ The warranty period is 3 months for the micro SD card, 6 months for the accessories, and 1 year for the main unit. ☞ Using a micro SD card that contains existing data can lead to errors. Delete all existing data before use. ☞ Frequently check the recordings and format the micro SD card at least once a week (File System: FAT32/32bit). ☞ Replace the micro SD card if it is not recognized when connected to a computer or cannot be formatted properly. ☞ Using a micro SD card that contains existing data can lead to errors. Delete all existing data before use. ☞ The manufacturer claims no responsibility for data stored on to the micro SD card. ☞ Regularly check the data stored on the micro SD card and the internal memory to ensure normal recording performance. This product has been designed as an in-vehicle recording device. Do not use for purposes other than as intended. The manufacturer is not responsible for any product defect or issue resulting from negligent use or care of the product by the consumer.
Accessories After unpacking the product, check inside and make sure all accessories are included. (Refer to images below) If the product or any of its accessories is damaged or defective, please contact your retailer. (Actual components may differ from the images below.)
or Constant Power Cable
Main Unit
micro SD Card
Rear Camera & Extension Cable
micro SD Card Adapter
Cigarette Jack Cable
Power Cable
Clips
Quick Guide
※ Actual components may differ from the images above. Accessories described in this manual are subject to change without prior notice for quality improvement purposes. ※ The external GPS module is sold separately and is available for purchase at your retailer.
Product Overview Main Unit External GPS Antenna Connector Rear Camera Connector Power Cable Connector
Security LED Flashing security indicat or. Micro SD Card Sl ot
Debugging Port Servicing Port (do not open.) Reset Button If the black box becom es unresponsive during use, press this button to reboot the device.
Built-In Microphone Status LED Blue Recording LED Red
Power/Manual Recording Button Press and hold to turn the power o n/off. Short press to start manual recordin g. # The actual component may differ from the images above.
Product Overview Rear Camera Mount
Lens
Rear Camera Specifications Effective Pixels
640×480
Power
DC 5V
Viewing Angle
Approx. 120°
Operating Temperature
-20℃~+60℃
Installation
1/3 of Vertical Space
Distant Area
¾ = Dynamic Area
2/3 of Vertical Space
¼ = Fixed Area
[Correct Installation Angle]
[Incorrect Installation Angle]
[Screen Ratio: Correct Installation Angle]
2/3 of Vertical Space
Distant Area
1/3 of Vertical Space
Dynamic Area
[Screen Ratio: Incorrect Installation Angle]
Product Use
[Front/Rear Preview] ②
①
∙ Tap ① to bring up the menu. The screen automatically reverts to recording mode after 10 seconds of inactivity. ∙ Tap ② to flip between front and rear camera feeds.
Caution) If a micro SD card has not been inserted, the screen will not turn on. Instead, the black box will repeatedly ask you to Check the micro SD card. The black box will function normally once a micro SD card has been inserted. If you receive the same message even with a micro SD card inserted into the black box, try removing the card and inserting it again. If the problem persists, replace the micro SD card or contact the service center.
Menu Menu
①
② ⑤
⑥ ⑦
③
④
⑧
⑨
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Infinite/Parking Mode Selection Video Recording Playback Volume Adjustment (0 - 5) Settings Parking Mode Event Count GPS Status Software Version Time & Date Displays retrieved time and date when connected to GPS. Displays the system's time and date when not connected to GPS. (System time and date can be configured under Settings.) ⑨ LCD Off Tap on the LCD screen to turn the screen back on.
[Terminology] ∙ Infinite: Captures 1-minute recordings while the vehicle is on the move. ∙ Parking Event: Starts to record whenever impact is detected while the vehicle is parked (20 seconds leading up to and 20 seconds after the impact). ∙ Parking Infinite: Captures 1-minute recordings while the vehicle is parked. ∙ Manual: Manual recording initiated by the user.
Settings_Video & Channel
Video ∙ Choose the desired picture quality (High, Medium, Low). ∙ "High" produces the best picture quality at the cost of recording capacity, whereas "Low" increases the recording capacity at the cost of picture quality. ∙ Once the recording capacity of each type of recording data is reached, oldest data is overwritten with new data. Back up the recording data on to a separate storage device on a regular basis.
Channel ∙ Choose between Front/Rear and Front. ∙ Front/Rear: Displays video feeds from front and rear cameras on a single screen. Front camera feed takes up the bulk of the screen, with the rear camera feed shown as a small window on the upper right corner. Tap on the PIP window to flip between the channels. (For more information, refer to "Front/Rear Preview" section on page 6.) ∙ Front: Displays video feed from the front camera only (full screen). Video from the rear camera is not recorded.
Settings_Sensitivity & LCD Off
Sensitivity ∙ Adjust the impact sensor sensitivity. ∙ Tap on the Sensitivity icon to cycle through Off, Low, Normal 1, Normal 2, Normal 3, High, and Very High in that order. ∙ Impact registration above the specified sensitivity setting while the vehicle is on the move or parked triggers event recording. Caution) ∙ "Very High" is so sensitive that the black box can recognize bumps on the road or even loud noises from inside the cabin as event recording triggers. If this occurs, try lowering the sensitivity setting. ∙ "Off" instructs the black box not to initiate event recording even if actual impact has been registered. Remember this before using the "Off" setting. (In Parking mode, event recording will still take place even if Sensitivity is set to "Off”) LCD Off ∙ Configure LCD timeout. ∙ Tap on the LCD Off icon to cycle through 30 secs, 1 min, 5 mins, Clock, and Always On in that order. The LCD automatically turns off after the specified amount of time. To turn the LCD back on, simply tap on it. ∙ "Clock" displays a clock instead of a blank screen after 1 minute of inactivity.
Settings_Parking Mode & Clock
Parking Mode
∙ Configure Parking Mode and Switchover settings. ∙ Parking Mode can be set to Parking Infinite or Parking Event. ∙ Switchover can be set to Off, 5 mins, 15 mins, or 30 mins. ∙ While in Infinite mode, the black box automatically switches over to Parking mode if its G-sensor does not detect vehicle motion for the duration specified under Switchover. ∙ While in Parking mode, the black box automatically reverts to Infinite mode when its G-sensor detects motion.
Clock
∙ Configure the black box's system time and date. ∙ Select a field and use the / buttons on the right to change its value. Tap on the exit icon on the right to exit. Changed settings are saved automatically. ∙ Configured system time settings appear on video recording file names and on the clock displayed when the LCD is automatically turned off (if enabled)
Settings_Timer & Shutoff Voltage
Timer ∙ While in Parking mode, the black box turns off automatically after the amount of time set under Timer has elapsed. ∙ Tap on the Timer icon to cycle through 6H, 12H, 24H, and 48H in that order.
Shutoff Voltage ∙ Shutoff Voltage protects your car's batteries from discharging completely when using them as a source of constant power for the black box. ∙ While the black box is operating in Parking mode, Shutoff Voltage automatically turns off the black box if the batteries' voltage drops below the specified level for longer than 5 minutes. ∙ Tap on the Shutoff Voltage icon to cycle through 11.5V, 11.7V, 11.9V, and 12.1V in that order. Choose the shutoff voltage level based on the current battery voltage level. ∙ Current battery voltage level is displayed on the right side of the Shutoff Voltage screen.
Settings_Microphone & Calibration
Microphone ∙ Turn the built-in microphone on or off. ∙ Set to "Off" if you do not want to have conversations and sounds from inside the cabin to be recorded along with the video.
Calibration ∙ Calibrate the black box's LCD screen. ∙ Calibrate the screen if your touch input is not being recognized correctly. Tap on the calibration points accurately using your fingernail or a pen (recommended). Caution) Incorrectly calibrating the screen may lead to you not being able to select the menu i cons.
Settings_Reset & Format
Reset [Default Settings] ∙ Video: High ∙ Channel: Front/Rear ∙ Sensitivity: Normal 2 ∙ LCD Off: 30 secs. ∙ Parking Mode: Parking Event ∙ Switchover: 5 mins ∙ Timer: 12H ∙ Shutoff Voltage: 11.9V ∙ Microphone: On ∙ Restore the black box's factory default settings. ∙ Resetting erases all previous user-configured settings.
Format ∙ Format the micro SD card. ∙ If using a new micro SD card, make sure to format it first. ∙ Formatting a used micro SD card erases all files stored on the card. Back up all important data on to a separate storage device before formatting the card. ∙ The black box may not turn on if the folders inside the micro SD card contain files other than black box video files. ※ micro SD Card File System: FAT32/Disk Allocation: 32K
PC Viewer ∙ PC Viewer lets you watch video recordings from micro SD cards and configure the black box's settings. ∙ Video recordings can be played back using regular media players, but doing so will display the feed from the front camera only. ∙ You must play back the video recordings using PC Viewer if you want to see feeds from both cameras.
1. PC Viewer Installation ∙ Insert the micro SD card into the adapter(included) and then connect the adapter to your computer using an SD card reader (sold separately). ∙ Double-click on the PC Viewer installation file contained in the micro SD card to start the installation process. ∙ Once the installation is complete, a viewer icon will appear on the desktop. Double-click on this icon to launch PC Viewer.
2. PC Viewer Overview ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭
Menu Bar Playback Window G-Sensor Playback Window Settings Default Playback Speed Playback Speed Default Brightness Brightness Mute Volume Speed Indication: Requires GPS module (sold separately). GPS Map: Requires GPS module (sold separately). Operating Mode Mode-Specific Playlist
[Menu Bar] [Default Settings] ∙ Drive: Custom Open file from micro SD card. ∙ Switchover: Parking Mode Event ∙ Parking Mode Activation: 5 mins Screen Capture: Screen captures are ∙ Impact Sensitivity (Infinite): Normal 2 saved to the CAM_CAPTURE folder. ∙ Recording Quality: High ∙ Channel: Front/Rear Save Clip: Save a specific portion of ∙ LCD Off: 30 secs the video being played back. ∙ Timer: 12H ∙ Audio: Record Print ∙ Speaker Volume: Level3 ∙ Battery Discharge Protection: Passenger Vehicle (12V) Settings ∙ Shutoff Voltage: 11.9V ∙ System Time & Date: Custom ∙ Save to: Custom Zoom In/Out ∙ Skip Frame Count: 5 About PC Viewer
Miscellaneous Operating Status LED Status (Blue) Status (Red)
Blue/Red
Operating Status Off
Parking Event
On
Infinite/Parking Infinite
Off
Settings or playback mode
Flashing
Recording
On
Standing by in Parking Event mode
Flashing in Sync
System error or firmware update in progress
Flashing Alternately
Micro SD card formatting in progress
Product Specifications Category Model LCD Touch Panel Camera
Specification RoadView RV-330LB 3.0" WQVGA 3.0” Resistive Touch, Glare
Front (Main Unit)
2.0M Pixel, 1/3.2" CMOS Sensor
Rear
1/4" CMOS IMAGE Sensor
Viewing Angle
Approx. 120°(diagonal)
Front (1CH)
Front Camera: 1280 x 720 (Max. 30 fps)
Front/Rear (2CH)
Front Camera: 1280 x 720 (Max. 25 fps) Rear Camera: 640 x 480 (Max. 10 fps)
Resolution & Frame Rate
Encoding File Format Power Dimensions & Weight
H.264 (video), PCM (audio) .AVI 12V DC 95 x 85 x 34.5mm, 110g
Operating Temperature
-20ºC to +60ºC
Storage Temperature
-30ºC to +70ºC
Miscellaneous Recording Resolutions Memory Ca pacity
Channel
1CH
Category
Infinite
Event
Allocation
40%
20%
40%
Available Space
Approx. 6GB
Approx. 3GB
Approx. 6GB
Approx. 110
Approx. 160
Approx. 220
Approx. 310
minutes
recordings
minutes
recordings
Allocation
40%
20%
40%
Available Space
Approx. 6GB
Approx. 3GB
Approx. 6GB
Approx. 120
Approx. 170
Approx. 240
Approx. 330
minutes
recordings
minutes
recordings
Front Recording Capacity 16GB 2CH Front+Rear Recording Capacity
Parking Infinite
Parking Event
Recording Resolutions Mode
Infinite Mode
Parking Mode
Manual Mode
Condition
Recording Status
Destination Folder
Front Camera
Infinite
Infinite
INFINITE
HD
G-Sensor
Event
EVENT
(1280x720)
Infinite
Parking Infinite
PARKING
VGA(640x480)
G-Sensor
Parking Event
EVENT
Motion Detection
Parking Event
PARKING
Power/Manual Recording button is pressed.
Event
EVENT
Rear Camera
VGA (640x480)
HD (1280x720)
Product Warranty
Product Warranty This product's warranty period comes into effect on the date of purchase. Please have your retailer record the date of purchase to ensure full warranty coverage. Product
Model
Serial No.
Purchase Da te
Purchaser
Telephone
Address Retailer
Telephone
Servicing and Tech Support 1.
Covered Servicing - 1 year from date of purchase (3 months for the micro SD card and 6 months for accessories)
2.
Paid Servicing - Upon expiration of normal warranty coverage - Malfunctions resulting from user negligence - Malfunctions caused by a force majeure event - Malfunctions caused by issues with the power supply or perip herals - Defects caused by other extraneous factors - Purchase of accessories and parts - Defects caused by unauthorized disassembly of the product
RV-330LB
1. Product (Model): In-Vehicle Black Box (RV-330LB) 2. Retailer: 3. Manufacturer/Country of Origin: SD System Co., Ltd./Republic of Korea 4. Certification No.:
The SDsystem Lineup
SD System Co., Ltd Customer Service Center +82-70-8299-5989 613, Hyundai I Valley, 31, 244 Beon-Gil, Galmachi-Ro, Jungwon-Gu, Seongnam-Si, Gyeonggi-Do, Korea www.sdsystem.com
