Transcript
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
S-788 TYPE III TACTICAL COMMUNICATION SHELTER P/N 5387.SH.14.0001 Description The Shelter PN 5387.SH.14.0001 is based on the Lightweight Multipurpose Shelter S-788 Type III (with tunnel) base (NUC 5411-01-235-5055) and is integrated with HVAC air conditioning system 5387.CZ.01.0009 PN and PN Generator 5387.SA.01.0027. Designed for use on vehicle HMMVW. The shelter is designed to be lightweight, portable, shielded to electromagnetic interference (EMI/RFI), versatile for a wide range of purposes (for example ARMY C41 systems). This Shelter is normally mounted on a HMMWV vehicle for transportation. To improve the INSIDE living conditions, the positioning of the equipment was designed and constructed in accordance with standard MIL-STD-1472F with particular attention to practicality and simplicity of use. The internal and external installation is made in accordance with current Safety Regulations (DM. 37/08, DLGS 81/2008). The whole system is built with the grounding wiring and external pin for proper grounding of the same. The Shelter is also designed to provide protection against shocks and vibrations for all equipment installed internally and externally. The parties and outdoor equipment and accessories installed are painted the same color CARC (RAL 6031). The shelter is equipped with a ladder for access (on the main door) and access points to the roof. The design and construction of the structure and all its external parts guarantee operation in the temperature range from -30 ° C to + 50 ° C. The Shelter has a tunnel when has placed a generator set with extractable slide (to facilitate maintenance).The generator can be controlled either locally via control panel switch, or remotely inside the shelter through dedicated control box.
Specifics Dimensions: Weight: Operating Temp. :
~ 2600 (l) x 2150 (w) x 1755 (h) mm (Shelter only) ~ 1445 Kg (with HVAC and G.E.) - 30°C ÷ +50°C
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
Description The Shelter can be powered via the external network to 220 Vac single phase, connecting the cable to the external Z-Panel , and whether by Generator set located in the tunnel. Inside the shelters after the power Z-panel is located a Main control panel, equipped with circuit breakers and residual current, for controlling the lighting system, and electric utilities. A switch on Main control panel allows selection between the mains power or power supply by generator.
ELECTRIC SYSTEM Consisting of n..3 section: 1. 2. 3.
Electrical distribution 220Vac Electrical distribution 28Vdc Lighting Electrical distribution 220Vac
• 220Vac mains input to the internal Generator set (GENSET) by Z-Panel GE • 220Vac mains input from external mains through Energy Z-Panel • UPS (input 220 Vac) • UPS (output 220 Vac No-break) this line is connected to electrical panel • H.V.A.C. • 220 Vac Sockets (q.ty 3) • 220 Vac Socket (q.ty 1) installed on Energy Z-Panel • 220 Vac No-Break Socket (q.ty 1) (RED Socket) • AC/DC Converter (input 220 Vac)
Lighting
Electrical distribution 28Vdc • • • • • • • • •
AC/DC Converter (output 28 Vdc) Connector VHF 1; pin A (+), pin B (-) Connector VHF 2; pin A (+), pin B (-) Connector VHF 3; pin A (+), pin B (-) Connector VHF 4; pin A (+), pin B (-) Connector HF 1; pin A (+), pin B (-) Connector HF 2; pin A (+), pin B (-) Sockets 28Vdc (q.ty 3); pin A (+), pin B (-) Socket 28Vdc (q.ty 1); installed on Energy Z-Panel
• Celing Light 1 connected to the mains 220 Vac • Celing Light Blue connected to the mains 220 Vac • Celing Light 2 connected to the mains 220 Vac No-Break (ceiling light that serves as a safety light so that without external power mains and without power by Genset, is powered by UPS) • Door Switch (installed near the door, has the function to enable the exchange of white light with the blue light when door opening). The switch can be excluded from the control panel by pressing the switch S1.
Energy Z-panel • • • •
Nr. 1 Male connector for mains input 220 Vac, SINGLE PHASE 220 VAC INPUT (Y1) Nr. 1 Socket 220Vac, 220 VAC SOCKET (Y2) with On/Off switch and red led (this line, in the electric panel, is plugged to CB6 switch). Nr. 1 Socket 28Vdc, 28 VDC SOCKET (Y3) with On/Off switch and green led (this line, in the electric panel, is plugged to CB15 switch). Ground clamp
Lightning Protection Box This module (which is located inside the shelter) allows the protection of supply lines from the energy Z-panel of overvoltages peaks
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
MAIN ELECTRIC PANEL Consisting of n..3 section: 1. 2. 3.
220Vac section 220Vac no-break section 28Vdc section
220Vac Section This section is composed of switching circuit protected by fuses F1, F2 for the choice of the generator internal (GENSET), Power OFF or External Network 220 Vac (SHORE POWER), the latter coming from the energy Z-Panel, the power supply selected is indicated by the corresponding LED (GENSET ON or SHORE POWER ON). Both the power supply from the internal generator set that one coming from the energy Z-panels are protected by circuit breakers CB1, CB2. The voltage, current and frequency of power choice are measured by instruments SM.1, SM.2 and protected by fuse F3. The main circuit breaker CB3 to the utilities at 220 Vac is the differential type, while the utilities UPS (CB4), HVAC. (CB5), 220Vac Sockets (CB6), Celing Light 1 (CB10) have a circuit breaker type. 220Vac no-break section
This section is managed from the power supply of 220Vac from the UPS installed inside the rack 12U, that in case of mains failure by the internal generator set (GENSET) or mains supply (Z-panel energy) ensures the service continuity for electric utilities connected (AC/DC Converter, 220Vac No-Break socket, Celing Light 2) . There is a differential switch which acts as a main switch (CB7) for this section, while the utilities AC/DC Converter (CB8), 220Vac NoBreak socket (CB18), Celing Light 2 (CB9) have a circuit breaker. 28Vdc section In this section is handled the power supply DC 28VDC, coming from the 28Vdc AC/DC converter, there is a voltmeter (SM.3) and an ammeter (SM.4) protected by the fuse F4, for viewing the value for voltage and current at the entrance of the switch with fuse (F5) that acts as the latter from main switch. The electric utilities connected corresponding VHF 1 (CB11), VHF 2 (CB12), VHF 3 (CB13), VHF 4 (CB14), 28Vdc sockets (CB15), HF 1 (CB16), HF 2 (CB17) each of them have a circuit breaker.
Inside the electrical panel is also controlled automatically switch from white light (Celing Celing Light Light 1 and 2) to blue light (Celing Light Blue) when you open the door of the shelter (black-out mode). At the close of the door the white lights (Celing Celing Light 1 and Light 2) light up again and after about 4 seconds turns off the light blue (Celing Light Blue). To disable the automatism switching of the above set the switch (S1) “Disable Switch DOOR” in position I.
UPS
AC/DC CONVERTER 28Vdc 100A
Located in the rack, this unit allows for the continuity of electricity to 220V in the absence of electricity from the generator inside (GENSET) that the external power supply (SHORE POWER), 220 Vac output is connected to No-Break 'CB7 switch in the electrical panel of the shelter. It includes a UPS module (6000VA) and three expansion packs batteries for 1 hour of autonomy to 2000W max.
Located in Rack 19 ", this unit 220 Vac powered with AC voltage (AC 230V AC MAINS) No line-break from the electrical panel, allows for output (28 V DC + SENSING) a DC voltage of 28V with a current continuous 100A max, inside there are no. 2 AC / DC CONVERTER 28VDC 50A with each, connected together in parallel configuration as to have a total output current of 100A, there are also no. 2 fans for its internal ventilation, the latter protected by a fuse (FAN FUSE). The start is carried out using the POWER switch on the front of the device and the correct operation is indicated by the LED PS1 and PS2. The 28Vdc output is connected to the main switch of This General Electric F5 of the shelter.
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
Z-PANEL GE (Tunnel) • •
Nr. 1, Male connector for mains input 220 Vac, SINGLE PHASE 220 VAC INPUT (Y1) Nr. 1, Signal connector GENSET REMOTE CONTROL (Y2)
RF AND TELEPHONE SYSTEM All RF connectors in the RF Z-panel (RF1 to RF8) and no.4 BNC connectors (Ant.1 to Ant.4) present near of the Z-Panel referred to the antennas 1, 2, 3, 4 are shown in the patch panel RF SIGNAL-installed in the rack cabinet RF 22U. In the four Z-Panel antennas refer to 1-2-3-4, are present in each of them a form of surge protection for RF signals connectorised BNC female on both sides.
COAX CONNECTORS BNC (50ohm F) No. 6
Z-Panel RF
RF 1
RF 2
RF 3
BNC
BNC
BNC
RF 4
TELEPHONE BINDING POST (2 LINE) No. 8
BNC
RF 5
RF 6
BNC
COAX CONNECTOR "N TYPE" (50 OHM F) No. 2
BNC
RF 7
N RF 8
N
OPTICAL SC CONNECTOR No. 2
TEL. 1
TEL. 2
TEL. 3
TEL. 4
Z-PANEL ANTENNA O.F.1
O.F.2
OPTICAL FIBRE
Z-Panel F.O. TELEPHONE
Z-Panel Signals
RF 1
RF 2
RF 3
BNC
BNC
BNC
28 VDC SOCKET Y3
RF 4
BNC
RF 5
RF 6
BNC
BNC
ON
OFF SINGLE PHASE 220 VAC INPUT Y1
RF 7 220 VAC SOCKET Y2
N RF 8
ON
N OFF
TEL. 1
TEL. 2
O.F.1
OPTICAL ST CONNECTOR No. 2
TEL. 3
TEL. 4
O.F.2
Z-Panel Power
OPTICAL FIBRE
All telephone signals present in the Z-panel TELEPHONE - OPTICAL FIBRE (TEL1, TEL2, TEL3, TEL4,) together with the duplex fiber optic connectors OF1 (SC Duplex), OF2 (ST Duplex) are listed in the patch panel TELEPHONE - OPTICAL FIBRE installed in the cabinet.
INTERNAL EQUIPMENT SEATS FOR OPERATORS There are No. 2 operator seats with safety belt. Each seat can rotate 360°, adjustable height and reclining backrest. Each is held in place with Crails on the floor of the shelter (able to move along the shelters). KIT C-RAIL Are fixed on the right inner wall and are used from board or similar items. COMMUNICATION EQUIPMENTS Inside the shelter are mounted No. 2 19 "24 U (units), installed and supported with dampers on the floor for protection against impact and vibration. Each rack includes No. 4 adjustable shelves. One Rack contains a patch panel for RF connections, while the other Rack contains the AC / DC converter.
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
Generator SET (Tunnel TTG-9)
The generator set is designed in a dedicated for the application inside the tunnel of the shelter S-788 Type III The choice of individual components was made based on considerations of critical thermal and mechanical conditions, to ensure reliability and low maintenance. G.E. technical Specifications Continuous electrical power Stand By electrical power Voltage Frequency Engine r.p.m. engine Fuel consumption (@ max load) Autonomy (@ max load) Weight Noisiness Dimensions (mm) Control Panel Construction Vibration Operating temperature (*) Performance obtained after 50 hours of operation
9 kW (*) 9.9 kW (*) 230 Vac monophase 50 Hz Lombardini 1500 3.6 l/h ~14 h (50 l diesel) 365 kg < 70 dB (A) @ 7 m 2000 x 600 x 750 h Main control panel with control and protection Unit; remote control inside the Shelter. Steel frame - electric welded Limited by means of dampers -30°C + 50°C
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
CONDITIONING SYSTEM (H.V.A.C.)
The air conditioning system is controlled through the control panel located inside the shelter and allows to select the solutions described below: • VENTILATION Exclusively provides ventilation inside the shelter. Enable only the evaporator fan, regardless of the temperature setting on the thermostat. • HEATING Heats the inner area of the shelter. If the temperature set on the thermostat is greater than the inner one, the electric heaters are powered and LED "HEATING" lights. If the temperature is less than the inner one, remains active only ventilation mode. • COOLING Cools the environment in the interior of the shelter. If the temperature set on the thermostat is less than the inner one, is activated the refrigerant circuit and the air cools. The operation of the compressor is indicated by the LED (yellow), "cooling". If the temperature set on the thermostat is greater than the inner one, the control system switches off the compressor and only the internal ventilation remains active. • AUTOMATIC When the option is set, the thermostat regulates the internal temperature, activating the electric resistance heating (if the temperature set on the thermostat is greater than the internal one) or by activating the compressor (if the temperature set on the thermostat is less than that internal).
INTEGRATED LOGISTICS SYSTEM TELECOMMUNICATIONS TECHNOLOGIES ENERGY AND DISTRIBUTION SYSTEMS INTEGRATED SYSTEMS AND TECHNOLOGIES
SISTEMI E TECNOLOGIE INTEGRATE
TELEGI Srl - Via Catania, 16 C.A.P. 00041 PAVONA (ROMA) (0039) 0693490011 Fax (0039) 069344918 E-mail:
[email protected] http://www.telegi.com NATO CAGE CODE: A5387
Sistema di Gestione Qualità certificato conforme a UNI ISO 9001:2008 – AQAP-2110
