Transcript
Access Reader I S Series Proximity Card Reader with Wiegand Outputwith Wiegand Output
S Series Proximity Card Reader with Wiegand Output u Appearance is aesthetically pleasing. u Card reader has 4 LEDs indicating ‘Power’, ‘Status’, ‘Alarm’, and ‘Armed’ with 2 lines LCD, and 16 keypad with back-lighting and beeper (on/off) u Highly reliable and consistent read range characteristics with low power consumption in a single, easy-to-install package. u Card reader housing is made of highest grade industrial polycarbonate material that offers very high level of vandal resistance u Card readers can be used for multi applications
ADC-23383
ADC-23382
Refer to back page for available model
u Models available in surface mount & flush mount u Can interface with all standard access control system supporting 26-bit Wiegand protocol
The ADC S-series proximity card readers with built-in card reader controller (CRC) are designed to interface with all ADC’s 26-bit Wiegand protocol access control products such as Access Easy Controller for multiple applications such as access control, time attendance, guard tour, arming/disarming of intrusion alarms and on/off control of power or devices, etc. ADC S-series enclosure houses both the CRC board and a HID proximity reader module, allows easy mounting and both installation for either indoor or outdoor at any location. It is sealed in polycarbonate enclosure designed to withstand harsh environments. Its performance is highly reliable and has a high degree off vandal resistance. The CRC board design supports 3 digital input monitoring points and 2 output points. The digital input points can be connected to door status sensor, exit push button switch or to alarm sensors, while output points can be used to drive the door strikes / electro-magnetic locks, all depending on software setup. ADC S-series of readers have an aesthetic appearance comes build-in with reader and controller, 2-lines liquid crystal display (LCD) and 16 keypad. The LCD supports multi-language text and graphics and incorporate a bright background lighting. Different models of reader without LCDs or keypad are also available.
www.boschsecurity.com
| Access Reader I S Series Proximity Card Reader with Wiegand Output
Hardware Specification
Ordering Information
Typical Maximum* Read Range CAD-20512/A, ProxCard® II card - up to 7.6cm (3”) CAD-21219A/B, ISOProx® II card - up to 6.35cm (2.5”) CAD-22021, DUOProx® Card – up to 6.35mm (2.5”) CAD-20021, ProxKey® II keyfob - up to 3.8cm (1.5”) CAD-23053, MicroProx® Tag – up to 5.1cm (2”) *Remarks: Installation conditions may affect or reduce the reading range
Model | Description ADC-23382/S-S eries proximity card reader with Wiegand output c/w LEDs, using HID reader (surface mount)) ADC-23383/Entry C³ Proximity Reader (with build-in CRC) green + red LEDs and keypad
������
Power Supply Power Supply Input: +12VDC @ 160mA or more (Linear power supply recommended) Cable Distance Max. cable distance to ADC TCU Controller: 300m/1000ft Display Indicators 16 x 2 lines LCD with backlight 4x LEDs indicators for ‘Power’, ‘Status’, ‘Alarm’, and ‘Armed’. * Remark:: Some models does not have LCD Operating Environment Operating Temp : 0 - 50 deg C (32 - 120 Deg F) Humidity : 0% to 90% non condensing Housing Material ABS (UL94V-O) fully waterproof, Polycarbonate UL 94 Color Standard: metallic front and pantone charcoal base Mounting Method Surface. Mount Uses 4 X m4 screws Mechanical Dimension Width = 110mm (4.331”) Height = 140mm (5.512”) Depth = 40mm (1.575”) Weight 300grams (10.537oz)
Asia-Pacific
Singapore
Bosch Security Systems Pte Ltd 38C Jalan Pemimpin Singapore 577180 Phone: +65 6319 3450 Fax: +65 6319 3499
[email protected] www.boschsecurity.com
ADC Technologies International Pte Ltd Bosch Group Phone:+65 6248 6102 Fax:+65 6746 5935 Singapore 416247
[email protected] www.boschsecurity.com
��
Represented by
© Bosch Sicherheitssysteme GmbH, 2005 | Modifications reserved | Printed in Singapore | 02/06
������
�����
���
���
�����
���
Mifare Reader Operating Frequency : 13.56MHz Comply with ISO 14443 Type A standard Bi-directional data transmission
��
��
CRC Card Microprocessor CPU design Full duplex communication ports to host Reader interface port: Entry & Exit. Digital Input Channels : 3 Digital Output Channels : 2 Hardware watch-dog
