Transcript
S SERIES
ROUGH
TERRAIN
FORKLIFT
6,000 - 12,000 lb. Capacity Tier 4 Diesel Engine Rugged Dependable Responsive
S SERIES
- 6,000, 8,000, 10,000, 12,000 LBS CAPACITIES @ 24” LOAD CENTER
Standard specifications
Instruments
The S Series straight mast rough terrain forklift provides optimum operator visibility, safety and comfort while maximizing machine performance. The one-piece frame welded construction offers rugged durability. The isolated, rubber-mounted operator’s compartment is designed to reduce noise and vibration. Operators benefit from greater fork visibility and control. All controls and instrumentation are close at hand.
Engine Ecomax T4 74 hp, direct injection, common rail, electronic, 4 cylinder diesel engine exceeds Tier 4 Final compliant emissions standards. •
• •
No Diesel Particulate Filter (DPF) needed. Ultra clean burn technology allows for no Selective Catalyst Reduction (SCR) exhaust aftertreatment. Reduced fuel consumption.¹ High torque at low speeds (295 ft. lbs @ 1,200 rpm).
Multi-function Digital LCD Screen • Fuel Level • Engine Coolant Temperature • System Voltage • RPM and Hour Meter Reading • On board diagnostics reduces downtime
Transmission Four-speed (3-speed in S120 models) fully synchronized torque converter with power reversing integral parking brake. Optional fully automatic powershift.
Backlighting provides better visibility in dark conditions. Instrument panel swings forward for easy access to fuse panel.
Axles
Hydraulics
Drive: Pad-mounted rigid planetary axle, torque proportioning four-pinion differential, gears are specially-shaped to transfer torque between wheels. Positive retraction brakes. 2WD Steer: Pin-mounted, oscillating axle with sealed tapered roller bearings. Oscillation: 14°
Hydraulic system powered by cast iron load sense hydraulic gear pump. A positive-pressure hydraulic tank prevents impurities from entering the system. Tank capacity: 21 gallons (79 L) Hydraulic flow rate: 24 gpm @ 2200 rpm
Optional 4WD Steer: Outboard planetary with torque proportioning differential. On the go engagement
Mast assemblies
Steering
Sellick SEE-THRU® all-roller design. Two and three-stage available. Mast sideshift: 6’’ total.
Load sense power steering with hydraulic pump assistance. Steer turns: 4.5 lock to lock.
Carriages ITA hook or shaft-type carriages equipped with 6 rollers and 4 side thrust rollers.
Electrical system Voltage: 12 V; alternator: 95A; battery: 1000 CCA.
Standard features
Operator compartment
• • • • • • •
Fully isolated, floating operator’s compartment exceeds ANSI/ ITSDF B56.6 ROPS/FOPS standard. Adjustable suspension seat with retractable seatbelt, tilt steering column, cup holder, coat hook, latched operator’s manual compartment, Operator’s Manual, safety decal package.
Brake system Service brake: Power-assisted braking system with enclosed oil-immersed multi-disc service brakes. Parking brake: Independent parking brake system, mechanicaloperated, lever-applied, manually-adjusted caliper, mounted on transmission output shaft. ¹Up to 10% reduced fuel consumption over T4i Interim engine.
• • • •
Adjustable suspension seat Tilt steering column Retractable seatbelt Fuel/water separator Power assisted enclosed wet multi-disc brakes Load sense power steering Halogen lighting package includes two front and two rear adjustable worklights Safety lighting includes LED brake lights & amber warning light Backup alarm Automotive style park brake with neutral interlock Neutral safety start
Optional Equipment • • •
w w w
Cab Air conditioning Hydraulic fork positioner
.
• • •
Turn signals Mirrors AM/FM MP3 player
s e l l i c k e q u i p m e n t
.
c o m
TECHNICAL SPECIFICATIONS I
H
E D
G
F C
B
A
S60
S80
S100
S120
Lift capacities @ 24 inch load center
Ref.
6,000 lbs
8,000 lbs
10,000 lbs
12,000 lbs
Total weight²
14,855 lbs
16,235 lbs
19,245 lbs
20,915 lbs
149”/3,785 mm
150”/3,810 mm
152”/3,861 mm
159”/4,039 mm
Overall length (without forks)
A
Overall width
B
89”/2,261 mm
Wheelbase
C
89”/2,261 mm
Height to top of overhead guard (standard)
D
97”/2,464 mm
Distance from seat to overhead guard (standard)
E
43”/1,092 mm
Outside turning radius Aisle width 90˚ stacking
178”/4,521 mm
183”/4,648 mm
266”/6,756 mm
271”/6,883 mm
Frame underclearance
F
15”/381 mm
Mast underclearance
G
12”/305 mm
Mast sideshift
6”/152 mm
Mast tilt - forward
H
45˚
Mast tilt - rearward
I
12˚
Travel speed (standard)
19 mph
Gradeability
12 mph
25%
Tire type & size (standard)
Drive (pneumatic) - 15.5 x 25 - 12 ply | Steer (pneumatic) - 14 x 17.5 - 14 ply
Engine model
ECOMAX T4
Cylinders
4
Engine output (gross power)
74 hp @ 2,200 rpm
Peak torque
295 ft. lbs @ 1,200 rpm
Transmission type
Power reversing synchromesh
Because of our constant dedication to product improvement, all specifications are subject to change without notice. — All Sellick forklifts meet or exceed all ANSI/ITSDF B56.6-2016 safety standards — ²Total weight with standard operator's platform, 144"' 2-stage mast, and load backrest.
w w w
.
s e l l i c k e q u i p m e n t
.
c o m
Sellick Working for you Built in the Sellick tradition of quality & reliability, the S Series is supported by a network of long-established material handling dealers that provide prompt parts and service. All Sellick products are backed by one of the best warranties in the business.
All Sellick forklifts meet or exceed all ANSI/ITSDF B56.6-2016 safety standards.
Sold & serviced by:
Sellick Equipment Limited P.O. Box 1000/358 Erie Street North Harrow, Ontario, Canada N0R 1G0 519-738-2255 •
[email protected] Visit us at www.sellickequipment.com
2016-11
Printed in Canada
272523-F
