Transcript
FLUSH VALVE W/ VACUUM BREAKER TV150NSJ INSTALLATION
SPECIFICATIONS
1.
120±1
a
191
191
100
Body Inlet
Cover
60
120±1
TROUBLESHOOTING
PT 1
b
PT 1
Ø31.75
Body
Packing
Ø31.75
TV150NSJ
TV150NSV1J
Flush Valve w/ Vacuum Breaker for CW705L
Flush Valve w/ Vacuum Breaker for CU714V
120±1
CHECK SOLUTION POINT Flow rate unsatisfactory 1 Remove and clean Water leaks around the body 2, 3 Tighten 4, Tighten Water leaks around the pipe
PROBLEM
2. CAP NUT
Nut Packing 1. PISTON VALVE
Vacuum Breaker
120±1
191
191
100
75
2.
PT 1
Pipe Washer
PT 1
Packing
Ø31.75
Ø31.75
TV150NSV2J
TV150NSV6J
Flush Valve w/ Vacuum Breaker for CW705L
Flush Valve w/ Vacuum Breaker for CW708NJ
Nut
Closet
OPERATING CONDITIONS
Outlet
1. Water supply pressure : 0.07 ~ 0.75 MPa. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc. )
MAINTENANCE 1. Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap. 2. Clean the piston valve periodically with soft brush.
3. LOW FLOW ADJUST
HIGH FLOW ADJUST
3. CAP NUT
4. NUT
Soft Brush
Water Strainer
Piston Valve
S06719J
ATTENTION Use of abrasive cleaning material such as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended.
