Transcript
www.arctic.ac
S113 BT EN Manual
EN PL FR DE ... m.s113bt.man.arctic.ac
Dear Customer, Thank you for choosing the ARCTIC S113 BT. This smart little box allows you to bring your music wherever you go. Lossless streaming of AAC and mp3, aptX , bass radiators and high quality drivers offer you a maximum of pleasure despite the small size. I hope you enjoy the S113 BT and we at ARCTIC look forward to further enriching your life with our products. If you would like to share how you use ARCTIC's products please do so at https://www.facebook.com/ARCTIC.en ARCTIC is a fully carbon neutral company and your support helps us to compensate every kilogram of CO2 we produce. Thank You. Sincerely, Magnus Huber ARCTIC CEO
Packaging Contents Speaker x 1
3.5 mm Cable (30cm) x 1
Micro USB Cable (80cm) x 1 Carrying Case x 1
Manual x 1
Function Diagram
OFF/ON
POWER
LINE IN
Power Switch Micro-USB Charging Port 3.5 mm Audio Input Volume up / Next Track Multifunction button for Answer Phone / Pairing Volume Down / Previous Track
Reconnection Via Bluetooth 1. Switch on Bluetooth on phone. 2. Switch on S113 BT by sliding the power switch. 3. S113 BT will auto reconnect. If not the case, repeat connection steps Via NFC 1. Enable NFC on your phone 2. Switch on S113 BT by sliding the power button. 3. Tap your phone on the NFC tag. Connection is automatic
LED Light Signals Blue ŸBlue light flashing means the speaker device is on and not paired. ŸBlue light flashing every five seconds means speaker is paired to a device. Red ŸRed light flashing means battery is low ŸRed light on constantly means charging Red & Blue ŸWhen both the red and the blue lights are rapidly flashing, it means the speaker is searching for device to pair with.
Getting Connected The S113 BT allows you to pair with your mobile device in three different ways: A. Bluetooth Pairing 1. Switch on S113 BT by sliding the power switch. 2. Ensure that your S113 BT is not connected to another phone by turning off Bluetooth on other devices. 3. Switch on Bluetooth on your phone and pair it with the speaker. Example: iOS
Select Bluetooth Click Settings
Switch On Bluetooth
Bluetooth is On Now Connected Select S113 BT
Example: Android 4.0
ON
OFF
Switch On Bluetooth
Bluetooth is On
Click Settings
ON
Click Search for Devices
ON
Select S113 BT
ON
Now Connected
Notes: ŸPairing mode will last up to five minutes or until a device is found, two tones will sound to let you know when pairing has stopped. ŸIf you exceed the effective range of approx. 10M (33ft) the speaker will disconnect and will automatically reconnect if the speaker re-enters the effective range within ten minutes.
B. Connection via NFC 1. Switch on the S113 BT speaker by sliding the power switch. 2. Enable NFC on your mobile device. 3. Tap your phone on the NFC tag and confirm the connection. 4. Play music!
C. Connect via Cable 1. Switch on S113 BT speaker by sliding the power switch. 2. Insert one end of the 3.5mm audio cable into the speaker and the other end into your mobile device headphone's output. 3. Play music!
Music Operations ŸVolume up: one short press of the ŸVolume down: one short press of the ŸNext track: while music is playing, press and hold the
until the track moves to the next track. ŸPrevious track: while the music is playing, press and hold
the until the start of the track replays. Quickly press and hold the again to go to the previous track. ŸPause / Play: one short press and release of the
multifunction button
Phone Operations If the mobile device that is paired with the S113 BT speaker is a cellular phone you can: ŸAnswer Call: one quick press of the multifunction button ŸEnd Call: one quick press of the multifunction button
.
.
ŸReject Call: pressing and holding the multifunction button
for three seconds or until you hear a tone that indicates this function has been completed. ŸVoice Recognition: If supported by your mobile device, turn
the voice recognition feature on, in standby mode press and hold the multifunction button for three seconds; a tone will sound to indicate activation. Say the name of who you would like to call and wait for the dial tone.
Charging The S113 BT can be charged while switched on or off. 1. Insert the micro USB cable into the S113 BT and the USB side into a power source. (We recommend the Home Charger 4500). 2. When the red LED light is off the S113 BT is fully charged. It is recommended to fully charge before initial use.
Restore to Factory Settings To restore your speaker to factory settings: 1. Switch the S113 BT on. 2. Then press the and buttons simultaneously for 10 seconds until a low key beep is emitted. 3. Switch the speaker off.
Reset To reset your speaker 1. S113 BT can be reset while switched on or off 2. Keep pressing the and then charge the S113 BT by insert the micro USB cable. 3. When the red LED on, the speaker is reset
Cautions ŸWireless connections are affected by obstructions such as
walls and other devices. ŸKeep S113 BT dry moisture may damage electronic
components. ŸExposure to high temperature will shorten the life and damage
electronic components. ŸOpening / altering the S113 BT voids all product warranty. ŸRough handling may damage inside electronic components.
Like us on facebook www.facebook.com/ARCTIC.en
© 2013 CSR plc and its group companies. The aptX mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by ARCTIC (HK) Ltd. is under license. Other trademarks and trade names are those of their respective owners. FCC ID ZG8BSK10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
© 2014 ARCTIC Switzerland AG. All Rights Reserved. No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of ARCTIC Switzerland AG. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.
