Transcript
Page 1 of 6 Your source for quality GNSS Networking Solutions and Design Services, Now!
S14 Splitter Technical Product Data
Features • Amplified & Passive Versions Available • Passes GPS, Galileo & GLONASS L1/L2 • Excellent Gain Flatness Gain | L1 - L2 | < 2 dB • RoHS/WEEE Compliant • Designed to Mil. Std. 810
Description The S14 GPS Splitter is a one-input, four-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units. In this scenario, the S14 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second, third and fourth RF outputs (J2,J3, & J4) would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to those ports. The S14 splitter comes with many available options to meet your specific needs. Please call, fax, email (
[email protected]), or visit our website (www.gpssource.com) for further information on product options, specifications, or to receive an easy to use order sheet.
Doc. Description: S14 GPS Splitter Author: Brandie Chenoweth
Doc. Number: 1559-TS-GPS-1X4-Splitter-02 Department: Marketing
Revision: 002 Date: Feb 29, 2012
Page 2 of 6 Your source for quality GNSS Networking Solutions and Design Services, Now! 0
Electrical Specifications, Operating Temperature -40 to 85 C Parameter Conditions Freq. Range In/Out Imped. (4)(5) Gain -Amplified (Norm) -Amplified (Cust Gain) (5) Loss-Passive (5) Input SWR (5) Output SWR 1dB Comp. Pt. (Ampl.) Input IP3 (Ampl.) Noise FigureAmplified (5) Gain Flatness -Amplified: -Passive: Amp. Balance Phase Balance Group Delay Flatness Isolation -Amp/Pass (Norm) -Amplified (Hi Iso.) 110 220/240
AC IN
DC Blk Pass DC -Amplified -Passive Powered
DC IN
Min
Typ
Max
Units
2
GHz Ω dB
Ant – Any Port, Unused Ports - 50 Ω Ant, J1, J2, J3, J4 Ant – Any Port, Unused Ports - 50 Ω
1
20
21
22
As Specified (XdB) Ant – Any Port, Unused Ports - 50 Ω All Ports 50Ω All Ports 50Ω All Ports 50Ω All Ports 50Ω Ant – Any Port, Unused Ports - 50 Ω
X-1
X
X+1
6.5
7.5
8.5 2.0:1 2.0:1
50
-32 -24 1.8
dB dBm dBm dB
|L1 - L2|, Ant – Any Port, Unused Ports - 50 Ω |J1 - J2|, Ant – Any Port, Unused Ports - 50 Ω Phase (J1 - J2), Ant – Any Port, Unused Ports - 50 Ω τd,max - τd,min , Ant – Any Port Adjacent Ports: Ant - 50Ω Opposite Ports: Ant - 50Ω Adjacent Ports: Ant - 50Ω Opposite Ports: Ant - 50Ω (3) Wall Mount Transformer Wall Mount Transformer (Various Intl. plug (3) types available)
Current Consumption of device, excludes Ant. Cur.
Ant/Thru Pass DC Current Powered
Non-Powered Configuration, DC Input on J1 Powered, Mil. Conn. or Quick Connect Option
Max RF Input -Amplified -Passive
Max RF input without damage
1.0 1
deg ns
110 230
3
dB
dB dB dB dB VAC VAC 14
VDC
16 16 (2) 28
VDC
16
mA
250 Note 3
mA mA
0 30
dBm
3
Device Current
dB
13 21 30 40
Any DC Blocked Port with a 200 Ω Load Non-Powered Configuration, DC Input on J1
Powered, Mil. Conn. or Quick Connect Option
2 1 0.5
(1)
VDC
Notes: 1. 2. 3.
DC IN for powered option must be 2V greater than desired DC Voltage Out Maximum DC IN is 35V when 1275B Powered option is included Maximum combined DC current draw out all ports of the device is a function of the DC input voltage and desired DC output voltage , according to the following: Iout ≤ 1.4 / (VDC IN - VDC OUT ) - 0.016
4. 5.
Amps
For powered option with a wall mount transformer (Voltage Input = 110/220/240 VAC), VDC IN is 9V. Choose Custom Gain Option for improved port-to-port isolation Performance guaranteed for N(F) connectors
Doc. Description: S14 GPS Splitter Author: Brandie Chenoweth
Doc. Number: 1559-TS-GPS-1X4-Splitter-02 Department: Marketing
Revision: 002 Date: Feb 29, 2012
Page 3 of 6 Your source for quality GNSS Networking Solutions and Design Services, Now!
Performance Data: S14 Active – Normal
S14 Active - Hi Isolation
1666
1718
1769
1820
1871
1923
1974
1731
1780
1829
1878
1926
1975
1615
1683
10
8
8
6
6 4
1.553
1513
SWR
10
1.173
2
1461
Frequency (MHz)
SWR
4
1410
1359
1308
1256
1205
1154
1103
1000
Frequency (MHz)
1564
12.747
12.015
1051
Gain (dB)
40 35 30 25 20 15 10 5 0
1974
1923
1871
1820
1769
1718
1666
1615
1513
1461
1410
1359
1308
1256
1205
1154
1103
1051
Frequency Response
21.156
20.430
1564
40 35 30 25 20 15 10 5 0 1000
1.642
1.326
2
Frequency (MHz)
1634
1585
1536
1488
1390
1341
1293
1244
1195
1146
1098
1049
1000
1975
1926
1878
1829
1780
1731
1683
1634
1585
1536
1488
1439
1390
1341
1293
1244
1195
1146
1098
1049
0 1000
0
1439
Gain (dB)
Frequency Response
Frequency (MHz)
Frequency Response
Loss (dB)
0 -7.683
-5
-7.891
-10 -15
1666
1718
1769
1820
1871
1923
1974
1683
1731
1780
1829
1878
1926
1975
1615
1564
1513
1461
1410
1359
1308
1256
1205
1154
1103
1051
1000
-20
Frequency (MHz)
SWR 10 8 6 4
1.530
1.262
2
Frequency (MHz)
Doc. Description: S14 GPS Splitter Author: Brandie Chenoweth
1634
1585
1536
1488
1439
1390
1341
1293
1244
1195
1146
1098
1049
1000
0
S14 – Passive Doc. Number: 1559-TS-GPS-1X4-Splitter-02 Department: Marketing
Revision: 002 Date: Feb 29, 2012
Page 4 of 6 Your source for quality GNSS Networking Solutions and Design Services, Now!
Available Options:
Power Supply Options: Source Voltage Options
Voltage Input 110 VAC 220 VAC 240 VAC (U.K.) DC 5-28 VDC
Output Voltage Options(1)
Type Wall Mount Transformer Wall Mount Transformer Wall Mount Transformer Military Style Connector or w/Quick Connects DC Voltage Out(2)
3.3 5 7.5 9 12 Variable (3-12V) Custom
RF Connector Options: Connector Options N SMA TNC SMB SMC MCX BNC
Connector Type (Male & Female) (Male & Female) (Male & Female) (Female) (Female) (Female) (Male & Female)
Limitations
Performance Not Guaranteed
Housing Options: Housings
Housing Type Standard Slimline
Limitations None Powered Option Not Ava. Connectors Not Available: N, TNC, BNC
Port Options: Pass DC(1) DC Blocked(1)
All Ports Pass DC J2,J3,J4 are DC Blocked & 200Ω Loaded, DC is passed J1 to ANT
Notes: 1. 2.
With Powered Option, any or all RF ports (input or output) can be DC Blocked or can pass the powered DC voltage Maximum combined DC current draw out all ports of the device is a function of the DC input voltage and desired DC output voltage , according to the following: Iout ≤ 1.4 / (VDC IN - VDC OUT ) - 0.016
Amps (or 250mA max)
For powered option with a wall mount transformer (Voltage Input = 110/220/240 VAC), VDC IN is 9V.
Doc. Description: S14 GPS Splitter Author: Brandie Chenoweth
Doc. Number: 1559-TS-GPS-1X4-Splitter-02 Department: Marketing
Revision: 002 Date: Feb 29, 2012
Page 5 of 6 Your source for quality GNSS Networking Solutions and Design Services, Now!
Part Number:
S14 – A – X-X-X-X - P110 / 5 – SF Product: Standard 1x4 Splitter (Pass DC J1-Ant, J2 Blk.) Gain Option: A – Amplified Blank – Passive AXX – Custom Gain, XXdB Environmental Option(s): X = (Any or All of Following): B - Beacon E - EMI Shielding HS - Hermetically Sealed W - Waterproof Source Voltage: P110 – Transformer, P220 – Transformer, P240 – Transformer, PDC – DC w/Quick Connects PM – Military Connector (User supplies DC) PMS – 1275B Surge Suppression STD Output Voltage: 3.3, 5, 7.5, 9, 12, XX, V – Denotes Output Voltage (XX – custom output voltage, V – variable) Connector Options: NM – N, Male NF – N, Female SM – SMA, Male SF – SMA, Female TM – TNC, Male TF – TNC, Female BM – BNC, Male BF – BNC, Female For help in creating the part number to meet your exact needs, contact us at
[email protected] or visit our website at www.gpssource.com. Doc. Description: S14 GPS Splitter Author: Brandie Chenoweth
Doc. Number: 1559-TS-GPS-1X4-Splitter-02 Department: Marketing
Revision: 002 Date: Feb 29, 2012
Page 6 of 6 Your source for quality GNSS Networking Solutions and Design Services, Now!
Mechanical: Standard Housing:
Slimline Housing:
Doc. Description: S14 GPS Splitter Author: Brandie Chenoweth
Doc. Number: 1559-TS-GPS-1X4-Splitter-02 Department: Marketing
Revision: 002 Date: Feb 29, 2012
