Preview only show first 10 pages with watermark. For full document please download

S150-w16r Construction Stapler

   EMBED


Share

Transcript

CONSTRUCTION STAPLER MODEL S150 W16R WIDECROWN (15/16") P P TOOL SCHEMATIC AND PARTS IMPORTANT! DO NOT DESTROY Always refer to safety and operating manuals, #403606, #405218 and #405222 for detailed information on this tool. It is the customer's responsibility to have all operators and service personnel read and understand this information. PARTS LEGEND 1 2 3 4 5 * 6 7 * 8 9 10 * 11 * 12 * 13 * 14 15 16 17 * 18 19 * 20 21 22 23 24 * 25 * 26 * 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 501043 500956 501299 501254 402717 404230 501250 091452 404054 404056 090927 092775 092773 404256 500954 015660 403582 405430 501252 404182 501322 402725 405243 501251 402728 091966 500369 501227 500975 501140 501141 402708 501229 402754 402706 091545 501023 500957 500963 097748 097746 092174 026133 401958 1 1 6 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 4 1 1 1 1 1 1 2 1 S150 W16R, 501270 T.H.S.C.S. 1/4-20 x 1/2" Cap Diffuser S.H.C.S. 1/4-20 x 1-1/2" Cap Conical Spring Retaining Ring Upper Valve Piston O-Ring Seal, Main Valve Lower Valve Piston O-Ring, Main Valve O-Ring, Main Valve O-Ring, Main Valve O-Ring, Main Valve Post, Main Valve S.H.C.S. 10-24 x 1/2" Driver Blade Nut O-Ring, Piston Piston Driver Blade Sleeve Retainer Seal Sleeve Flange Sleeve Sleeve O-Ring, Sleeve O-Ring, Sleeve O-Ring, Sleeve Bumper Retainer Gasket Cap Logo Housing Left Logo Housing Right Gasket Nose Flange Bumper Seal Driver Blade Flange Nose S.H.C.S. 1/4-20 x 7/8" Grip Handle Housing End Plug Spring Valve Pin Valve Pin O-Ring, Valve Body Roll Pin 1/8 x 1 Valve Body 45 46 47 48 49 50 ▲ 51 52 ▲ 53 54 55 56 ▲ 57 58 59 60 61 62 63 64 65 ** 66 67 68 69 70 71 72 73 74 ➔ 75 76 77 78 79 * 80 81 82 83 84 85 86 87 88 ▲ Apply Loctite 242 (Blue) Part No. 093500 ➔ Denotes new change. Retaining Washer Trigger Lever Trigger Roll Pin Trigger Pin Locknut S.H.C.S. 10-32 x 5/8" Rail Bracket S150 S.H.C.S.10-32 x 3/8" Pin Negator Drum Drum, Negator Negator Bd. Head Screw 6-32 x 1/4" Follower Retaining Washer Latch Follower Button Spring Follower Latch Roll Pin 3/32 x 7/16 Pivot Rail Cover Assembly Nameplate Rail & Rail Cover Assembly Warning Label Roll Pin Assembly Pivot Pin Front Guide Spring Front Guide Latch Latch Front Guide Latch Pin Back Plate Front Guide Spring W.C.E. Upper W.C.E. Hardened Washer S.H.C.S. 10-32 x 5/16" Lower W.C.E. Assembly Flat Washer #10 Spring Guide Block Roll Pin 1/8 x 1-1/8" Intermediate W.C.E. Wear Shield Cap Wear Plate Flange Lower W.C.E. Rail Wear Button Shingle Guide .050 AIR CONSUMPTION - SCFM/FASTENER affixed. Replace if necessary. Label available at no charge through the Service Dept. 2 1 1 1 1 6 4 1 3 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 AIR CONSUMPTION CHART * Denotes normal wear items. ** Make sure warning label (500459) is properly 402668 501008 501010 501009 402669 092037 004502 402741 004224 402743 091534 091532 091568 402760 402486 402758 402759 402740 402748 501293 404848 500459 404698 402730 405079 501207 501209 501204 501210 402734 402763 402629 403716 404699 402736 402738 501320 071297 501244 501253 501147 402765 403211 402769 .045 .040 .040 .035 .030 70 80 90 100 110 AIR PRESSURE - PSIG 120 21 1 S150 W16R 2 22 25 3 84 Cap Assembly #501262 501270 23 24 26 27 37 28 4 8 5 3 29 38 Main Valve Assembly #501261 6 40 41 7 9 11 31 32 10 12 13 16 Piston Assembly #501267 46 Trigger Assembly #501048 55 48 47 56 57 63 59 62 58 45 61 60 66 80 64 85 82 19 50 83 76 54 49 81 77 20 44 36 17 18 53 43 34 35 15 51 52 42 45 33 14 50 51 30 39 14 53 67 65 88 59 68 69 74 70 76 51 77 71 78 75 50 79 72 73 Adjustable Work Contacting Element Parts 77 86 WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard 50 87 ACCESSORIES Sequential Operating Kit This special attachment is designed for sequential operation (stops "contact" firing). The operator must depress and hold the work contacting element against the work surface before pulling the trigger. This sequence must be repeated each time the tool drives a fastener. Part No. 501039 Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system. Part No. 1X0713 Large Nylon Tool Bag Part No. 219246 Safety Glasses Clear Part No. 402510 Tinted Part No. 402512 Belt Hook Attaches to tool enabling you to carry tool on belt holder. Part No. 500955 Belt Hook Holder Attaches to work belt and carries tool using the above belt hook. Part No. 219028 Trigger Valve Repair Kit This kit repairs all trigger valve air leaks. Part No. 219224 Lubricants and Loctite Lubricant 1 lb. Lubricant 5 gram tubes Loctite 242 (Blue) 1 oz. Lubricating Oil 16 oz. Lubricating Oil 8 oz. with Antifreeze Part No. 403734 Part No. 219188 Part No. 093500 Part No. 403720 Part No. 219090 Degreaser Cleaner Ideal cleaner for all Paslode tools. Part No. 219086 Adjustable Work Contacting Element Kit This kit converts the standard work contacting element on the tool to an adjustable work contacting element that allows control of the depth of drive. Part No. 219259 SAFETY INSTRUCTIONS DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE WEAR EYE AND HEARING PROTECTION 60 0 120 Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool. 120 0 60 Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day. Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode. Printed in U.S.A. © 2005, Illinois Tool Works, Inc. P An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061 501351-3 9/05