Transcript
S19-310AC, S19-310SBFW, S19-310TT Combination Drench Shower and Eye/Face Wash Unit • Complies with American National Standard Z358.1-2004 • Galvanized Steel Protected with BRADTECT™ Safety Yellow Coating • Universal Identification Sign and Inspection Tag Included • Full, One-Year Warranty • Patent Pending
CERTIFIED MODEL Z358.1-2004
UP C C
R
Specifications Combination Drench Shower and Eye/Face Wash Unit saves space and fits easily into any work environment. Shower valve operates quickly by a pull rod with a triangular handle. Shower provides a superior washdown with a more even spray pattern. Eye/face wash operated by a large, highly visible push handle. Safe, steady water flow under varying water supply conditions from 30–90 PSI is assured by integral flow control in the sprayhead assembly. NOTE: The ANSI Z358.1 standard requires an uninterruptable supply of flushing fluid at a minimum 30 PSI flowing pressure.
cUPC Approved: S19-310AC, S19-310SBFW and S19-310TT are certified to comply with the requirements of the Uniform Plumbing Code and the National Plumbing Code of Canada by the International Association of Plumbing and Mechanical Officials (IAPMO).
Standard Equipment SpinTec™ Showerhead 3.1" (78.7mm) diameter highly visible yellow impact-resistant plastic. Model S19-310TT includes a 10-3/4" (273mm) diameter corrosion-resistant stainless steel shroud. SpinTec drench showerhead features integral 23 GPM flow control, conserving water and helping to accurately size your tepid water system.
Model S19-310AC
Eyewash Bowl 10" (254mm) diameter yellow impactresistant plastic or 10-3/4" (273mm) diameter corrosion-resistant stainless steel. Standard Sprayhead Assembly Twin perforated-disc eye/face wash heads with protective pop-off sprayhead covers, operated by a large, highly visible push handle or a foot treadle (S19-310AC only). Safe, steady water flow under varying water supply conditions from 30–90 PSI is assured by integral flow control in the sprayhead assembly. NOTE: The ANSI Z358.1 standard requires an uninterruptable supply of flushing fluid at a minimum 30 PSI flowing pressure.
Model S19-310SBFW
Shower Valve Chrome-plated brass 1" NPT stay-open ball valve. Operated by a stainless steel pull rod with triangular handle. Eyewash Valve Chrome-plated brass 1/2" NPT stay-open ball valve. Hand operated by highly visible safety yellow PVC push handle (S19-310SBFW and S19-310TT) or stainless steel push handle (S19-310AC).
Recommended Option: Navigator S19-2100 EFX25 Emergency Thermostatic Mixing Valve
Pipe and Fittings 1-1/4" galvanized steel with BRADTECT™ safety yellow coating. Model S19-310TT
Water Supply 1-1/4" NPT.
Satisfies ANSI Z358.1-2004 tepid water requirements.
Emergency Fixtures Document No. 4500
Page 1 of 3 This information is subject to change without formal notice. 12/2/08
© 2008 Bradley Corporation P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.253.4161 bradleycorp.com
S19-310AC, S19-310SBFW, S19-310TT Combination Drench Shower/Eye/Face Wash Unit Model
Description
S19-310AC
Drench Shower/Eyewash - Plastic Showerhead and Stainless Steel Bowl with Foot Treadle Operation
S19-310SBFW
Drench Shower/Eyewash - Plastic Showerhead and Stainless Steel Bowl
S19-310TT
Drench Shower/Eyewash - Stainless Steel Showerhead and Stainless Steel Bowl
S19-2100
Navigator EFX25 - Emergency Thermostatic Mixing Valve
Model S19-310AC
25-3/8" (645mm)
4-1/2" (114mm)
24" (610 mm)
3.1" (78.7mm)
Local codes may require the installation of a backflow prevention valve to complete proper installation. Compliance with local codes is the responsibility of the installer. Valve must be tested annually to verify that it is functioning properly. Backflow prevention valves are not included with the fixture and may be supplied by the contractor or purchased from Bradley Corporation.
7'-2" (2180mm) to Floor
9" (229mm) 66" (1676mm) to Floor 6-1/2" (165mm)
36-3/8" (924mm)
6" (152mm)
Top View From Bowl
9-1/2" (241mm)
Ø 10-3/4" (273mm)
10-1/2" (267mm)
Ø 9" (229mm) Flange with (3) Ø 3/8" (10mm) Holes on Ø 8" (203mm) Bolt Circle
All dimensions assume standard thread engagement. Variations in manufacturing allow for +/- 1/8” (3mm) per threaded joint. To find the tolerance of a dimension, add the number of thread joints in between a dimension and multiply it by 1/8” (3mm). Emergency Fixtures Document No. 4500
Page 2 of 3 This information is subject to change without formal notice. 12/2/08
© 2008 Bradley Corporation P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.253.4161 bradleycorp.com
S19-310AC, S19-310SBFW, S19-310TT Combination Drench Shower/Eye/Face Wash Unit
Model S19-310SBFW
Model S19-310TT 25-3/8" (645mm)
4-1/2" (114mm)
24" (610mm)
Ø 3.1" (78.7mm)
7'-2" (2180mm) to Floor
25-3/8" (645mm)
6" (152mm)
24" (610mm)
Ø 10-3/4" (273mm)
9" (229mm)
66" (1676mm) to Floor
9" (229mm)
7'-1" (2159mm) Suggested Height to Floor
66" (1676mm) Suggested Height to Floor
6-5/8" (168mm)
6/1/2" (165mm)
36-1/2" (927mm)
36-1/2" (927mm)
6" (152mm)
6" (152mm)
Top View From Bowl
Top View From Bowl
9-1/2" (241mm) Ø 10-3/4" (273mm)
Ø 10-3/4" (273mm)
10-1/2" (267mm)
9-1/2" (241mm)
Ø 9" (229mm) Flange with (3) Ø 3/8" (10mm) Holes on Ø 8" (203mm) Bolt Circle
10-1/2" (267mm)
Ø 9" (229mm) Flange with (3) Ø 3/8" (10mm) Holes on Ø 8" (203mm) Bolt Circle
All dimensions assume standard thread engagement. Variations in manufacturing allow for +/- 1/8” (3mm) per threaded joint. To find the tolerance of a dimension, add the number of thread joints in between a dimension and multiply it by 1/8” (3mm). Emergency Fixtures Document No. 4500
Page 3 of 3 This information is subject to change without formal notice. 12/2/08
© 2008 Bradley Corporation P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.253.4161 bradleycorp.com