Transcript
S1A-S1M
S1A - S1M
Features •
Low profile package.
•
Glass passivated junction.
SMA/DO-214AC COLOR BAND DENOTES CATHODE
General Purpose Rectifiers Absolute Maximum Ratings* Symbol
TA = 25°C unless otherwise noted
Parameter
Value
Units
1A
1B
1D
1G
1J
1K
50
100
200
400
600
800 1000
1M
VRRM
Maximum Repetitive Reverse Voltage
IF(AV)
Average Rectified Forward Current, @ TA = 100°C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range
-55 to +150
°C
Operating Junction Temperature
-55 to +150
°C
Value
Units
IFSM Tstg TJ
V
1.0
A
40
A
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics Symbol
Parameter
PD
Power Dissipation
1.4
W
RθJA
Thermal Resistance, Junction to Ambient*
85
°C/W
Device
Units
*Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics Symbol
TA = 25°C unless otherwise noted
Parameter 1A
VF
Forward Voltage @ 1.0 A
trr
Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Reverse Current @ rated VR TA = 25°C TA = 125°C Total Capacitance VR = 4.0 V, f = 1.0 MHz
IR CT
2001 Fairchild Semiconductor Corporation
1B
1D
1G
1J
1K
1M
1.1
V
1.8
µs
1.0 50
µA µA
12
pF
S1A-S1M, Rev. C
(continued)
2
SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.315x0.315" (8.0x8.0mm) COPPER PAD AREAS
1
0
0
25
50 75 100 125 Lead Temperature [ºC]
150
1
0.1
0.8
1 1.2 1.4 Forward Voltage, VF [V]
1.6
1.8
Figure 2. Forward Voltage Characteristics
30
100
25
10 Reverse Current, IR [mA]
Peak Forward Surge Current, IFSM [A]
10
0.01 0.6
175
Figure 1. Forward Current Derating Curve
8.3ms Single Half Sine-Wave JEDEC Method
20 15 10 5 0
1
2
5 10 20 Number of Cycles at 60Hz
50
50 T J = 25 º C f = 1.0 MHz Vsig = 50mV p-p
10 5
1 0.01
0.1 1 10 Reverse Voltage, VR [V]
Figure 5. Total Capacitance
2001 Fairchild Semiconductor Corporation
100
1 T J = 75ºC
0.1 T J = 25ºC
0.01
0
20
40 60 80 100 Reverse Voltage, VR[V]
120
140
Figure 4. Reverse Current vs Reverse Voltage
Transient Thermal Impedance [ºC/W]
100
T J = 125ºC
0.001
100
Figure 3. Non-Repetitive Surge Current
Total Capacitance, CT [pF]
100
Forward Current, IF [A]
Average Rectified Forward Current, IF [A]
Typical Characteristics
100
Units Mounted On 20"x 20"(5.4mm 2 )+0.5mil
50 inches(0.013mm) Thick Copper Land Areas
10 5
1 0.01
0.1
1 10 Pulse Duration [s]
100
Figure 6. Thermal Impedance Characteristics
S1A-S1M, Rev. C
S1A-S1M
General Purpose Rectifiers
TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™
FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™
OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER
SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET
VCX™
STAR*POWER is used under license
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. H4
