Transcript
PRODUCT SPECIFICATION
camera site
BS1750/CM1750/CM1750S/TB1750 Mount WALL, CEILING/PEDESTAL, T-BAR MOUNT FOR CAMERAS Product Features • Low Cost Camera Mount • Contemporary Design • Adjustable Swivel Head • Supports up to 7 Pounds (3.2 kg) • Wall, Ceiling, Pedestal, or False T-Rail Mounting CM1750EXT
• Optional 4-Inch (10.16 cm) Extender Available
CM1750
TB1750
BS1750
The CM1750, CM1750S, TB1750, and BS1750 are universal camera mounts designed for use with cameras weighing up to 7 pounds (3.2 kg). All mounts feature an easily adjustable swivel head for camera positioning.
CM1750S
1/4-20 THREAD
The CM1750 is primarily designed for ceiling or pedestal mounting, but can also be used as a wall mount. The CM1750S is a shorter version of the CM1750 and is recommended for ceiling or pedestal mounting applications.
.40 (1.02)
The TB1750 is specifically engineered for mounting on a T-rail in false ceiling applications.
1.13 (2.87)
4.00 (10.16)
Ø 1.00 (2.54) 5.47 (13.89) CM1750 5.09 (12.93) TB1750 2.93 (7.44) BS1750
The BS1750 is the swivel portion of the mount equipped with a T-rail clip for use in T-rail applications requiring a shorter mount.
3.31 (8.41) CM1750S
Ø 1.00 (2.54)
1.00 (2.54)
In addition, an optional 4-inch extender (CM1750EXT) is available for use with the CM1750 or TB1750 mounts. This simple tube assembly screws in-between the mount and the base, extending the maximum length of the mount by 4 inches (10.2 cm).
CM1750EXT Ø 3.00 (7.62)
4X Ø .265 (.673) ON A Ø 2.250 B.C.
1/4-20 PEM STUD
1.50 (3.81) 1.00 (2.54)
1.10 (2.79) 1/4-20 SCREW BS1750/TB1750
CM1750/CM1750S MOUNT FLANGE
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
DataFAX SPEC: 2217 MANUAL: 22186 (BS1750/TB1750/CM1750/CM1750S), 22196 (CM1750EXT)
®
C217 / REVISED 10-01
International Organization for Standardization; Registered ISO 9001
TECHNICAL SPECIFICATIONS MODELS
GENERAL
BS1750 CM1750
Swivel head only with T-rail clip Universal wall, ceiling, or pedestal camera mount with adjustable swivel head Same as CM1750 except shorter 4-inch (10.2 cm) extension tube for use with CM1750 and TB1750 mounts Universal T-rail camera mount with adjustable swivel head for use in false ceilings
CM1750S CM1750EXT TB1750
MECHANICAL Pan Adjustment Tilt Adjustment Camera Mounting Locking Method
360° 90° maximum 1/4-20 threaded stud with nut Set screw secures swivel assembly (Allen wrench supplied)
Construction Finish Maximum Load Unit Weight BS1750 CM1750 CM1750S CM1750EXT TB1750 Shipping Weight BS1750 CM1750 CM1750S CM1750 EXT TB1750
Aluminum Gray polyester powder coat with black anodized ball/swivel 7 lb (3.2 kg) 0.25 lb (0.11 kg) 0.50 lb (0.22 kg) 0.30 lb (0.14 kg) 0.25 lb (0.11 kg) 0.38 lb (0.17 kg) 1 lb (0.45 kg) 2 lb (0.9 kg) 1 lb (0.45 kg) 1 lb (0.45 kg) 1 lb (0.45 kg)
CERTIFICATIONS • UL Listed (BS1750, CM1750, CM1750S and TB1750)
®
Pelco Worldwide Headquarters: 3500 Pelco Way, Clovis, California 93612-5699 USA USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 International Tel: (559) 292-1981 • FAX (559) 348-1120 • DataFAX (559) 292-0435 www.pelco.com
Specifications subject to change without notice. ©Copyright 2001, Pelco. All rights reserved.
