Preview only show first 10 pages with watermark. For full document please download

S4k-966-wp Datasheet V1.0 280815.pub - Smart-e

   EMBED


Share

Transcript

4Konnect S4K-966-WPD Flexible and comprehensive wall plate solution using Cat 6-8 STP/FTP cable The Smart-e S4K-966-WPD fea- • Easy to install, inexpensive CAT 6-8 cable • Outputs reach up to 100m The S4K-966-WPD is a flexible and cost effective solution to • Support HDMI up to 297 MHz TDMS clock extending HDMI, bi-directional IR, full duplex RS232 together with 100BaseT Ethernet. Consisting of a transmitter/ receiver pair, the output signals can be connected via a convenient wall plate receiver (double gang UK size), whilst the compact transmitter unit can be installed up to 100m away. • HDCP/EDID/DDC transparent link • • HDMI resolutions 4K, 2K &1080p • Full duplex RS232 passthrough Distribute high resolution UHD HDMI video together with IR, RS232 and 100BaseT Ethernet over a single CAT 6 screened twisted pair cable up to 100m • Bi-directional IR pass through • 100BaseT Ethernet pass throuigh • 1 x CAT 6-8 STP/FTP cables • Supplies remote power to wall plate • Uses HDBaseT technology • Status LEDs The S4K-RX966-WPD is a double gang UK type wall plate receiver capable of accepting UHD HDMI signals up to 4K UHD resolutions from the transmitter. Implementing the complete 5-Play of the HDBaseT specification the extender pairs also provides the pass through of wide band bi-directional InfraRed signals, full duplex RS232 up to 115Kbaud and 100BaseT Ethernet. Connectivity. Whilst POH power (48V) to the wall plate is derived from the Cat 6 cable provided by the remote transmitter unit S4K-TX966-PSE. All that is required is a single Cat6 cable connection to provide all these features. The S4K-RX966-WPD can connect to any other product in the S4K range as an extender or pre-switch into a matrix. The S4K range from Smart-e is a family of digital extenders and matrices using standard CAT 6-8 STP/FTP cable to transmit 4K resolution signals over long distances HDCP 2.2 compatible • Compact transmitter unit • UK wall plate receiver — double gang SPECIFICATION HDMI Embedded Audio Signal Types HDMI, DVI, DisplayPort Multimode Types Embedded audio in HDMI Formats HDMI w/Deep Color 3D, 4K, 2K Digital Formats Content Protection HDCP V2.2 transparent Connector HDMI Type A Female Dolby Digital® Plus Dolby® TrueHD DTS-HD High Res, DTS-HD Master Audio™, up to 8chPCM TV resolutions PC resolutions 480, 576, 720, 1080 p & i 640x480 through to1080p 2K&4K Digital Connector HDMI Power Ethernet Connector RJ45 Voltage 48V DC Data rate 100Mbits/s Connector 4 pin DC locking jack Protocol 100BaseT Max. current 1000mA per unit Cable Types CAT 5e, CAT 6/6e, CAT 7, STP, FTP Power Total for both units 10Watts Control Control RS232 pass through <115 kbaud IR signal 30-115kHz Connector Screw lock IR connector 3.5mm jack socket DDC/EDID Transparent connection CEC Transparent DDC/EDID connector Within HDMI CEC connector Within HDMI PANEL DRAWINGS APPLICATION DRAWING Typical application for extending a computer or Digital Signage player EXTENDERS IN THE S4K RANGE S4K-TX966-PSE S4K-TX967-PD S4K-TX967-WPD S4K-RX966-PD S4K-RX967-PSE S4K-RX966-WPD 100m transmitter for HDMI, RS232, IR, Ethernet and provides POH. 4k,2k, 1080p@60Hz, 3D fully HDCP 100m transmitter for HDMI, RS232, IR, Ethernet and receives POH. 4k,2k, 1080p@60Hz, 3D fully HDCP 100m transmitter for HDMI, RS232, IR, Ethernet, POH. 4k,2k, 1080p@60Hz, 3D fully HDCP wall plate 100m receiver for HDMI, RS232, IR, Ethernet and POH. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP 100m receiver for HDMI, RS232, IR, Ethernet provides POH. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP 100m receiver for HDMI, RS232, IR, Ethernet, POH. 4k,2k, 1080p@60Hz, 3D fully HDCP wall plate