Transcript
. . . light years ahead™
S739DV Product Specification Description:
Video With Universal Up-the-Coax Control, Response, and Genlock
Features
General
✔
The S739DV Video and Control Data System represents a major advance in fiber-optic links for up-thecoax control systems. In up-the-coax systems, video is transmitted from the camera back to the control center over coaxial cable, and control signals to operate the pan-tilt-zoom (PTZ) functions are transmitted from the control station out to the receiver/driver at the camera station. In addition to video and control, the S739DV provides for the transmission of response signals from the camera station to the control station. The S739DV also provides for transmission of embedded genlock sync if genlocking is a feature of the particular control system used. The S739DV works with all major brands of upthe-coax systems. The S739DV also features more extensive LED diagnostics than ever before, with input/output indicators for video, command, response, genlock sync, and optical signal strength.
✔ ✔
✔ ✔ ✔ ✔
Transmits video, control, response, and embedded genlock signals One- or two-fiber links available Compatible with all major up-the-coax control systems, including: American Dynamics, Baxall, Burle, Elbex, Panasonic, Pelco, Robot, Sensormatic, VCS format, Vicon, Videoalarm, and others Diagnostic LEDs for video, command, response, sync, and optical signals on both Tx and Rx Operating distances up to 11 mi (18 km) Built-in optical automatic gain control (OAGC) Modern, heavy-duty housing design
Basic Model Descriptions S739DV1 S739DV2 S739DV2L
Single-fiber link uses 850 and 1300 nm for two-way transmission. Two-fiber link uses 850 nm over separate fibers for two-way communication. Two-fiber link uses 1300 nm wavelength over separate fibers for long-distance two-way communication.
For a complete list of available models, please refer to Table 1.
www.fiberoptions.com Fiber Options 80 Orville Drive, Bohemia NY 11716-2533
[email protected] US Tel: 631-567-8320 or 800-342-3748 Fax: 877-FiberFax (877-342-3732 toll free) or 631-567-8322 For international offices, see the back cover.
SERIES S739DV TECHNICAL INFORMATION ELECTRICAL Input Voltage: Standalone modules: 12 - 16 VAC 12 - 16 VDC Rack modules: 13.5 - 16 VDC Current Requirement: Tx: 300 mA Rx: 380 mA
Power Consumption: Heat Equivalent*:
6W 0.3 Btu/min. 0.09 cal/min.
* NOTE: This represents the conversion of all input power to heat. The actual heat generated will be less.
VIDEO SIGNAL Number of Channels: Video Direction: Standards Supported: Video Input Signal: Input Impedance: Video Output Signal:
1 Tx Æ Rx EIA, CCIR, NTSC, PAL 1.0 V p-p composite video 75 Ω 1.0 V p-p composite video
DATA SIGNALS Data Directions: Data Formats:
Control: Tx Å Rx Response: Tx Æ Rx All major up-the-coax formats: American Dynamics Baxall Burle Elbex (sync and control) Panasonic (PTZ and VD2) Pelco Robot Sensormatic VCS format Vicon Videoalarm, and others
Output Impedance: Output Gain: Signal-to-Noise Ratio: Video Bandwidth: Video Resolution: Differential Phase: Differential Gain:
75 Ω Unity >54 dB at maximum optical attenuation 10 MHz 800 TV lines <3º <3%
Location in Vertical Interval: In even fields, the control signal is imposed on lines 8–19. In odd fields, the control signal is imposed on lines 9–20. Pulse Amplitude: 50 mV to 2 V
GENLOCK SYNC SIGNAL Sync Direction: Detection Area: Sync Amplitude:
Tx Å Rx Can be imposed on all lines outside the control area. Up to 6 V
VIDEO AND DATA INTERCONNECTION Recommended Maximum Distance Video Equip. to Tx: Rx to Video Equip.:
2
Recommended Cable Type: ≤100 ft (30 m) ≤100 ft (30 m)
Video Termination:
www.fiberoptions.com
RG59/U coaxial cable (Belden No. 9259 or equivalent) The last video component in the video line must be terminated with 75 Ω.
SERIES S739DV TECHNICAL INFORMATION OPTICAL Wavelength: 850 and/or 1300 nm. Optical Mode: Multimode Optical Budget: 13 dB minimum Operating Distance* NOTE: Consult the specifications from the manufacturer of the control equipment for any limitations related to the control equipment. S739DV1: S739DV2: S739DV2L:
3.2 mi (5.2 km) 3.2 mi (5.2 km) 11 mi (18 km)
Emitter Type: Fiber Type: Modulation Type: Gain Control: Transmitter Launch Power: Receiver Sensitivity:
LED 62.5 µm Frequency modulation Optical automatic (OAGC) –15 dBm (850 nm) –28 dBm (850 nm)
*Operating distance assumes best fiber. It will be affected by the type and number of splices in the fiber.
MECHANICAL Standalone Transmitters Dimensions: Length: 5.05 in (128 mm) Width: 4.84 in (123 mm) Height: 1.63 in (41 mm) Weight: 1.21 lb (0.55 kg) Construction: Aluminum Finish: Grey semigloss paint Mounting Method: 4 No. 6 (3 mm) screws Rack Modules Module Width: Weight: Front Panel Finish:
Standalone Receivers, Dimensions: Length: Width: Height: Weight: Construction: Finish: Mounting Method:
501R Type 9.31 in (236 mm) 6.33 in. (161 mm) 1.15 in (29 mm) 1.6 lb (0.72 kg) Aluminum Black semigloss paint 4 No. 6 (3 mm) screws
1 slot, 1.0 in. (25.4 mm) 0.72 lb (0.33 kg) Black semigloss paint
LED INDICATORS VIDEO (bicolor) . . . . . . . . . . . . Shows presence of good video signal. Level/LossTM (bicolor) . . . . . . . Shows presence of good optical signal. COMMAND . . . . . . . . . . . . . . . Shows activity on PTZ control channel. RESPONSE . . . . . . . . . . . . . . . Shows activity on response channel. SYNC . . . . . . . . . . . . . . . . . . . Shows activity on genlock channel.
CONNECTORS Optical: Video:
ST BNC
Power: Standalone units: Rack units:
www.fiberoptions.com
3-pin detachable screw terminal connector Direct rack connection
3
SERIES S739DV TECHNICAL INFORMATION AGENCY COMPLIANCE AND MTBF Emissions:
FCC Part 15, ICES-003, AS/NZS 3548, EN55022 ENV50204 EN61000-4-2, 3, 4, 5, 6, 11
Immunity:
FCC
Safety:
UL1950, CAN/CSA 22.2, NO.950-95 >100,000 hours
MTBF:
PART 15 COMPLIANT
ENVIRONMENTAL Temperature Range in Operation: Temperature Range in Storage:
-40° to +167° F (-40° to +75° C) -40° to +185° F (-40° to +85° C)
OPTIONS Power Supply:
Humidity Range in Operation:
0 - 95% relative, noncondensing
Humidity Range in Storage:
0 - 95% relative, noncondensing
CONTROLS
Model 611P or 612P, depending on unit (refer to Table 1)
Alarm Disable:
Removable jumper on receiver rack cards.
TABLE 1: MODEL VARIATIONS Model Number
Function
Enclosure Type*
Fiber No. of Max. Size Fibers Atten.
Wavelength
Power Supply Model
S739DVT-EST1
Transmitter
4X4
62.5
1
13 dB
850/1300
611P or 612P
S739DVR-EST1
Receiver
501R
62.5
1
13 dB
850/1300
612P
S739DVT-EST2
Transmitter
4X4
S739DVR-EST2
Receiver
501R
62.5
2
13 dB
850
611P or 612P
62.5
2
13 dB
850
612P
S739DVT-EST2L
Transmitter
4X4
62.5
2
13 dB
1300
611P or 612P
S739DVR-EST2L
Receiver
501R
62.5
2
13 dB
1300
612P
Standalone Modules
Rack-mount Modules S739DVT-RST1
Transmitter
515R1, 517R1 62.5
1
13 dB
850/1300
Powered by rack
S739DVR-RST1
Receiver
515R1, 517R1 62.5
1
13 dB
850/1300
Powered by rack
S739DVT-RST2
Transmitter
515R1, 517R1 62.5
2
13 dB
850
Powered by rack
S739DVR-RST2
Receiver
515R1, 517R1 62.5
2
13 dB
850
Powered by rack
S739DVT-RST2L
Transmitter
515R1, 517R1 62.5
2
13 dB
1300
Powered by rack
S739DVR-RST2L
Receiver
515R1, 517R1 62.5
2
13 dB
1300
Powered by rack
*For exact dimensions, see the MECHANICAL section.
www.fiberoptions.com
4
SERIES S739DV TECHNICAL INFORMATION
FIGURE 1: TOP VIEW S739DVT-1 TRANSMITTERS
FIGURE 2: SIDE VIEW ALL STANDALONE TRANSMITTERS
FIGURE 3: TOP VIEW S739DVT-2 TRANSMITTERS
1.63 in (41 mm)
4.84 in (123 mm)
4.84 in (123 mm)
5.05 in (128 mm) 5.05 in (128 mm)
FIGURE 4: S739DV STANDALONE RECEIVERS ALL MODELS (IN 501R ENCLOSURE) 9.31 in (23.6 cm) 8.25 in (21.0 cm)
1.15 in (2.9 cm)
6.33 in (16.1 cm)
5.88 in (14.9 cm)
5
www.fiberoptions.com
. . . light years ahead™
S739DV Product Specification
THE FOREVER WARRANTY Fiber Options warrants that, at the time of shipment, the products manufactured by Fiber Options will be free from defects in material and workmanship. Should any defects appear in the product, Fiber Options shall repair or replace the product or supply an equivalent, at its sole discretion. A Return Authorization (RA) number is required to send the unit back in case return is necessary. Return shipments to Fiber Options shall be at the buyer’s expense. Fiber Options will return said equipment prepaid via best way. THIS WARRANTY IS THE SOLE WARRANTY OF FIBER OPTIONS WITH RESPECT TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ANY AND ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PURPOSE. THIS WARRANTY IS THE SOLE REMEDY AVAILABLE FOR ANY CLAIM BASED ON AN ALLEGED DEFECT IN MATERIAL OR WORKMANSHIP WHETHER SUCH CLAIM ARISES IN CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. FIBER OPTIONS SHALL NOT BE LIABLE IN ANY WAY FOR ANY CONSEQUENTIAL DAMAGE RESULTING FROM ANY DEFECT COVERED BY THIS WARRANTY.
All specifications are subject to change without notice. Information furnished by FIBER OPTIONS is believed to be accurate and reliable. However, no responsibility or liability is assumed by FIBER OPTIONS for its use, nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or other rights of FIBER OPTIONS.
Copyright 2001 by FIBER OPTIONS. All rights reserved. 12-0739DV-Rev A 010724
www.fiberoptions.com 80 Orville Drive, Bohemia NY 11716-2533
[email protected] US Tel: UK Australia France Germany Hong Kong Latin America
Tel: Tel: Tel: Tel: Tel: Tel:
631-567-8320 800-342-3748 +44 113 238 1668 +61 3 9370 9192 +33 01 60 86 54 53 +49 700 34237678 +852 2907 8108 800-342-3748
Fax: Fax: Fax: Fax: Fax: Fax: Fax:
631-567-8322 877-FiberFax (877-342-3732) +44 113 253 8121 +61 3 9370 9936 +33 01 60 86 86 04 +49 36256 21991 +852 2142 5063 877-342-3732
