Transcript
TM
miniSD Card Adapter for microSD Card TM
SCHF Series
Safe, robust, and precise body.
Shor
body
Safe
sin
t- c
i
r c New model e r u i tresistant
Pre micro SD card
Ro
TM
ts a card from n e v
s-insertion mis
sistant struc -t re
e tu r
Twi s
Full size
A structure to prevent a card from being inserted incorrectly
Pr
bust
ecise
Supports small-sized/high-capacity memory cards of various SD standards. ●The use of the compound resin prevents short circuits, even if a memory card of a different size to the adapter were to be mistakenly inserted. ●The robust structure achieves high twist-resistance. ●A structure to prevent a card from being inserted incorrectly. ●A half-lock structure to prevent a card from falling out. ●SDA Standard-compliant.
NEW
SCHF
SCHC
●
micro SD TM
mini SD
TM
SCJC
●
micro SD TM
SD
●
mini SD
TM
SD
Alps offers a full variety of models for enhanced sets equipped with memory cards.
miniSD card adapter for microSD card TM
TM
micro SD
SCHF Series
TM
mini SD
TM
Supports small-sized/high-capacity memory cards of various SD standards. Applications
Mobile phones, various personal digital assistants, digital cameras, personal audio devices, etc. Product Line Product No.
Product name
SCJC Series
SD card conversion adapter for miniSD TM card SD card conversion adapter for microSD TM card
SCHC Series New
miniSD TM card conversion adapter for microSD TM card
SCHF Series
Typical Specifications Structure Applicable media
Specifications
Performance
Specifications
microSD TM card
Operating temperature range
−25℃ to ＋85℃
Mounting type
Voltage proof
500V AC 1min
Mounting style
Insulation resistance (Initial)
1,000MΩ min.
Contact resistance (Initial)
100mΩ max.
Media ejection
Manual couple/decouple
Dimensions Unit:mm
1.6 5.2 min.
7.7
5.5
0.3
0.7
18.5 0.6
0.9
9 1 2 3 1011 4 5 6 7 8
1.2
21.5
DAT2
CMD CD/ VSS1 DAT3
VDD VSS2 DAT1 CLK DAT0
11.12 8.85
2.54
1
Note 1
1.4
20
Note 1. Inside miniSDTM Adapter: Vss1 must be connected Vss2 Cautions for Use 1. Specification indicated in this catalog is outline only. When employing the product, use of an officially authorized specification for supply contract is recommended. 2. Unless specifically indicated otherwise, products in this catalog have been designed and manufactured for use in ordinary electronic equipment and devices, such as AV equipment, electric home appliances, office machines, and communications equipment. Equipment manufacturers are consequently advised that when these products are planned for equipment that requires a high degree of safety and reliability, especially those apparatuses like medical equipment, aviation and aircraft equipment, space equipment, and burglar alarm equipment, the manufacturers should assure equipment safety by providing protection circuits and redundant circuitry and should fully study the suitability of such products for the intended equipment. 3. The external appearance, performances, and other properties of the product may be changed for improvement without prior notice. The product introduced in this catalog may discontinue being produced without prior notice. 4. miniSD and microSD are trademarks of the SD Association. 5. All product names, company names and names of standards described in this catalog are trademarks or registered trademarks of their respective owners. 6. Please contact us for any enquiries and queries on our products and their uses. 7. This catalog is valid till the end of December 2007.
Inquiries about Products
Products Information Center ＋81 (3) 5499-8154 Products Catalog Site http://www3.alps.com
1-7, Yukigaya-otsuka-cho, Ota-ku, Tokyo, 145-8501
