Transcript
C a t a l o gu e
O n l i n e Sh o p
SafetyLink Pty Ltd has been operating as a manufacturer of Height Safety equipment for over a decade. Our product range includes anchors, lifeline systems, permanent ladder systems and ladder stabilisers. We specialising in meeting the needs and requirements of the commercial height safety market when it comes to access, abseil anchors, personnel static lines, energy absorbing anchor points and permanent ladder systems.
PERSONAL PROTECTION EQUIPMENT CATALOGUE
Safety Link’s products can be found all over Australia and New Zealand on constructions such as schools, shopping malls, office blocks, high rise buildings, industrial factory’s, and even residential homes. These SafetyLink products create permanent safe access to places so that construction, maintenance and servicing can safely take place for the life of the building in most cases. SafetyLink products have been up until this point for specific use in the commercial trade environment. However with customer request SafetyLink is now proud to offer a range of products to suit the recreation market as well, such as flying fox pulleys, haul line pulleys, shear reduction devices and belay devices. SafetyLink has also expanded its range of harnesses, karabiners and wire rope and can offer a more complete product range to this industry. At SafetyLink we are always evolving to meet the industry and client needs as the standards change and the need calls. Please do not hesitate to contact one of our team if you need to find a product or service to fit your individual needs, we are here to help. All SafetyLink products undergo extensive testing in a multitude of scenarios and our experienced
www.heightsafety.com www.allsafetyshop.com
technical support team is complemented with comprehensive installation manuals.
1300 789 545
WARNING - Any installation of height safety components/products must be carried out by a competent person. Person/s must be safe at all times. READ ENTIRE HANDBOOK BEFORE USING V e rANY s i o SAFETYLINK n : M a r c h PRODUCT. 2017 FAILURE TO FOLLOW ALL WARNINGS AND INSTRUCTIONS MAY RESULT IN A SERIOUS INJURY OR DEATH.
Page 1 of 40
www.heightsafety.com
1300 789 545
SafetyLink Pty Ltd has been operating as a manufacturer of Height Safety equipment for over a decade. Our product range includes anchors, lifeline systems, permanent ladder systems and ladder stabilisers.
Safety Link’s products can be found all over Australia and New Zealand on constructions such as schools, shopping malls, office blocks, high rise buildings, industrial factory’s, and even residential homes. These SafetyLink products create permanent safe access to places so that construction, maintenance and servicing can safely take place for the life of the building in most cases. SafetyLink products have been up until this point for specific use in the commercial trade environment. However with customer request SafetyLink is now proud to offer a range of products to suit the recreation market as well, such as flying fox pulleys, haul line pulleys, shear reduction devices and belay devices. SafetyLink has also expanded its range of harnesses, karabiners and wire rope and can offer a more complete product range to this industry. At SafetyLink we are always evolving to meet the industry and client needs as the standards change and the need calls. Please do not hesitate to contact one of our team if you need to find a product or service to fit your individual needs, we are here to help. All SafetyLink products undergo extensive testing in a multitude of scenarios and our experienced technical support team is complemented with comprehensive installation manuals. WARNING - Any installation of height safety components/products must be carried out by a competent person. Person/s must be safe at all times. READ ENTIRE HANDBOOK BEFORE USING ANY SAFETYLINK PRODUCT. FAILURE TO FOLLOW ALL WARNINGS AND INSTRUCTIONS MAY RESULT IN A SERIOUS INJURY OR DEATH.
SafetyLink Pty Ltd | PO Box 88 | Hawks Nest NSW 2324 SALES – SHANE ANDREWS | Phone: 02 49641068 | Fax: 02 4 9641069
[email protected] | www.heightsafety.com
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 2 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
We specialising in meeting the needs and requirements of the commercial height safety market when it comes to access, abseil anchors, personnel static lines, energy absorbing anchor points and permanent ladder systems.
www.heightsafety.com
1300 789 545
Table of Contents
HARNESSES .......................................................................................................... 6 Harness – FERNO Vertical Flying Fox / Swing ............................................ 6 Harness – Skylotec CS10 Skypark (adult or child size)............................... 6 Harness – Adventure ................................................................................. 6 Harness – Spanset Ergo 1104 .................................................................... 7 Harness – Spanset Spectre Basic 1100 ...................................................... 7 Harness – Spanset 1800 ERGO .................................................................. 7 Harness – Skylotec ARG 80 ........................................................................ 7 Harness – Skylotec ARG 30 ........................................................................ 8 Harness – Skylotec G-AUS-0902 ................................................................ 8 Harness – Skylotec Base Specialist Rope Workers .................................... 8 Harness – Skylotec Pro Specialist Rope Workers ...................................... 8 Harness – Skylotec Sirro 2 ......................................................................... 9 Harness – Ferno Hi-Safe FH50 ................................................................... 9 Harness – Skylotec Rescue Pro 2.0 ............................................................ 9 Harness – Petzel Newton Harness (M-XXL) ............................................... 9 ROOFERS KITS.................................................................................................... 10 Roofers Kit – Spanset (6001) ................................................................... 10 Roofers Kit – Ferno (HS-DLER-BP) ........................................................... 10 Roofers Kit – Spanset (6001SA-SPECTRA-0) ............................................ 11 Roofers Kit – Skylotec (SET-AUS-002) ...................................................... 11 LANYARDS ......................................................................................................... 12 LANYARDS / ROPELINES .................................................................................... 13 ROPELINES / RETRACTABLE LANYARDS ............................................................ 14 LANYARDS / ABSORBERS ................................................................................... 15 SLINGS ............................................................................................................... 16
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 3 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
RECREATIONAL HARNESS .................................................................................... 5 Harness – Vertical Centrepoint Sit ............................................................ 5 Harness – Vertical Gym ............................................................................. 5 Harness – Vertical VHS Chest .................................................................... 5 Harness – Vertical Challenge ..................................................................... 5 Harness – Skylotec Buddy Pads Gekko ...................................................... 5
www.heightsafety.com
1300 789 545
BAGS ................................................................................................................. 30 Kit Bag – SafetyLink.................................................................................. 30 STANDARD TERMS AND CONDITIONS OF SALE ................................................ 31 INSPECTION PROTOCOLS .................................................................................. 35 FALL PROTECTION EQUIPMENT LOG EXAMPLE ................................................ 36 PERMANENT LADDER SYSTEM .......................................................................... 37 QR CODES .......................................................................................................... 38 NOTES …….. ....................................................................................................... 39
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 4 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
POLE STRAP - (L-AUS-0581-250) ....................................................................... 17 VERTICAL ETRIER AND AIDER ............................................................................ 17 SUSPENSION TRAUMA RELIEF STRAPS – SPANSET (SG238) ............................. 17 TEMPORARY HORIZONTAL LIFELINES - SPANSET .............................................. 18 TEMPORARY HORIZONTAL LIFELINE - SKYLOTEC (L-0329) ............................... 18 BOSUNS CHAIR – SPANSET (FPFV8020) ............................................................ 18 BOSUNS CHAIR – SKYLOTEC (G-0205) ............................................................... 18 HELMETS ........................................................................................................... 19 HELMET SHADE - FERNO (VAS SUNBRERO) ...................................................... 19 BELAY DEVICE – ELDERID EDDY (EDE60001) ..................................................... 20 DESCENDER - FIGURE 8 ..................................................................................... 20 DESCENDER – KONG BELAY TUBE (KON49400) ................................................ 20 DESCENDER – TUBER BELAY PLATE (VAUA AB01B) .......................................... 20 KARABINERS ...................................................................................................... 21 KARABINERS ...................................................................................................... 22 RAPIDES ............................................................................................................. 23 COLLARED EYEBOLT: FEMALE THREAD ............................................................. 24 COLLARED EYEBOLT: MALE THREAD ................................................................. 24 NUT, BOLT AND WASHER .................................................................................. 24 ROPE ADJUSTER ................................................................................................ 25 POLE ACCESS KIT ............................................................................................... 25 LADDERLINK POLE BRACKET ............................................................................. 25 VERTICAL LIFELINE SHUTTLE WITH KARABINER................................................ 25 PULLEYS ............................................................................................................. 26 BRAKE BLOCK .................................................................................................... 27 GALVANISED CABLE STEEL WIRE ROPE (CABLE) ............................................... 27 ROPE / CORD ..................................................................................................... 28 TOOL SAVER – SKYLOTEC (ACS-0182) ............................................................... 28 PULLEY SYSTEM – SPANSET (4000) ................................................................... 29 RESCUE KIT – SPANSET (GOTCHA) .................................................................... 29 RESCUE KIT – SKYLOTEC (A-028) ....................................................................... 29
www.heightsafety.com
1300 789 545
RECREATIONAL ONLY
Harness – Vertical Centrepoint Sit Product Code: REC.HARN001
RECREATIONAL ONLY
Pole strap attachment points. Wide padded waist and leg loops for added comfort when hanging or working for long periods of time. Multiple heavy duty gear loops around waist for storing hardware/gear. Fully adjustable ear leg risers to ensure best fit. Certified to AS/NZ 1891.1 2007. Size XS, S, M, L, XL (conditions apply for XS & XL)
Harness – Vertical Gym Product Code: REC.HARN002
RECREATIONAL ONLY
Vertical basic waist harness suitable for outdoor education applications. Optional padded band available for comfort. Size: One size fits most. Weight: 490 g.
Harness – Vertical VHS Chest Product Code: REC.HARN005
RECREATIONAL ONLY
One size fits all, weight 340gm. Vertical Chest Harness is only to be used in conjunction with a sit harness. It provides additional support for people with a high centre of gravity or for fixing ascending systems securely to the body. The two soft eyes on the Vertical Chest Harness are designed to connect to the harness belay loop via a hardware connector. Also available with double connector.
Harness – Vertical Challenge Product Code: REC.HARN006
RECREATIONAL ONLY
Vertical Challenge Harness is specially designed for climbing walls, high ropes courses and adventure parks. It is fitted with one simple tie-in point which is placed above the belt, effectively raising the centre of gravity to avoid inversion. It has adjustable leg loops with alloy double lock buckles & optional gear loops. Size: Standard - one size fits most (XS and XL on request). Weight: 460 g.
Harness – Skylotec Buddy Pads Gekko Product Code: REC.HARN003
Recreational Catalogue – Version: 03.2017
This is a great full body harness for young kids giving you complete piece of mind that they will remain safe, whilst learning to rock climb. Skylotec small, simple and stylish kid’s harness. Suitable for all applications involving height. Size: Kids size max. 40 kg. Weight: 450 g. Colour: Green/Black.
Click Back to Table of Contents
Page 5 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
SOME HARNESSES HAVE A 8 DAY LEAD TIME TO BE MADE AS THEY ARE DATED FOR 10 YEARS & THEREFORE NOT HELD AS STOCK. * Please enquire for our full range of Harnesses *
RECREATIONAL HARNESS
www.heightsafety.com
1300 789 545
HARNESSES Harness – FERNO Vertical Flying Fox / Swing RECREATIONAL ONLY Product Code: REC.HARN009
RECREATIONAL ONLY
Full body harness designed specifically to address recent industry regulation changes and requirements involved with challenge rope courses, artificial climbing/abseiling walls, giant swings and flying fox (zipline) applications. Multiple attachment points, D-rings for separate attachment or for use together. Twin soft tie in seat attachment points. Colour-coded body sections for simplistic fitting, minimise risk and provide instructors with a higher level of certainty especially with large groups. One size fits most (VHS HIGH TOP)
Harness – Skylotec CS10 Skypark (adult or child size) Product Code: REC.HARN014
Skylotec harness designed for high ropes courses & outdoor education centres, also would suit use on giant swings flying foxes, abseil towers and rock climbing. Adjustable chest strap & leg loops. Rear adjustable back strap. Adjustment buckles on both hips. Colour identifiable shoulder straps. Single fall arrest waist attachment point on front. Single fall arrest dorsal attachment point on rear. Quick release buckle connecting chest straps to waist. Single gear loop on waist strap.
Harness – Adventure RECREATIONAL ONLY
Product Code: REC.HARN020
Recreational Catalogue – Version: 03.2017
The SafetyLink Adventure Harness has been designed specifically for the Outdoor Recreation industry. The harness complies with AS/NZS 1891.4 and has a waist fall arrest attachment point as well as a dorsal fall arrest point. The Adventure harness is highly adjustable due to its twin waist buckles and has both a chest and dorsal adjustment buckle system, allowing comfortable fitting to users whether they be tall or short. The Adventure Harness is ideally suited to activities requiring a front waist attachment such as giant swing, abseiling, rock climbing, flying fox and high ropes courses. The Adventure harness has the added bonus of a dorsal attachment point which is suited to leap of faith/pamper pole and power fan activities.
Click Back to Table of Contents
Page 6 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
HARNESSES Harness – Spanset Ergo 1104 Product Code: HARNES001
Spanset full body harness with rear and front D, dorsal extension. Confined space loops on shoulders, fully adjustable leg, shoulder, and chest straps. Suitable for fall arrest, confined space entry, general roofing applications. Carbon steel buckles and breathable rear mesh panel. Certified to AS/NZ 1891.1 2007.
Harness – Spanset Spectre Basic 1100 Product Code: HARNES005
Spanset fall arrest harness, with rear D. Front fall arrest loops. Fully adjustable shoulder and leg straps. Carbon steel buckles. Breathable rear mesh panel. Certified to AS/NZ 1891.1 2007.
Harness – Spanset 1800 ERGO Product Code: HARNES006
Spanset full body suspension harness with rear & front fall arrest Ds. Wide abseil attachment points & padded waist and leg bands for greater comfort and use. Multiple strong plastic coated gear loops & Hi-vis webbing for greater safety. Certified to AS/NZ 1891.1 2007. Quick release shoulder strap with easy strap adjuster. Suitable for use in rope access, maintenance, construction, high ropes, flying fox.
Harness – Skylotec ARG 80 Product Code: HARNES007
Recreational Catalogue – Version: 03.2017
Skylotec specialist rope access workers harness. Light construction resulting in 2kg weight. Multiple equipment loops with metal loops for safe tool bag attachment. Up to 3 karabiners can be fitted to the front fall arrest D-ring (IRATA standards). Clever stitching maintains harness shape to stop wear on the users neck. Complies with AS/NZS 1891.1:2007.
Click Back to Table of Contents
Page 7 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
HARNESSES Harness – Skylotec ARG 30 Product Code: HARNES008
Skylotec general use height safety harness with confined space entry. High performance/ease of use/maximum safety. Light and uncomplicated at 1kg. Highly adjustable with shoulder & leg adjustable buckles. Single chest & dorsal fall arrest eyelets. Complies with AS/NZS 1891.1:2007.
Harness – Skylotec G-AUS-0902 Product Code: HARNES009
Classic simple general work harness. Light weight at 800grams. Easy to fit with adjustable leg buckles & chest clip. Rear metal dorsal fall arrest eyelet. Shoulder point twin webbing fall arrest attachment. Complies with AS/NZS 1891.1:2007. One size - Unisize.
Harness – Skylotec Base Specialist Rope Workers Product Code: HARNES010
Skylotec Rescue is the base model of the Rescue Pro harness, for fast and safe work in the areas of rescue and rope access. High quality padding in the hip, leg and shoulder area. Fixable rear fall arrest D-ring. Inbuilt fall indicator. A total of six tool loops, four on hip area & one on each leg strap. Note no in-built chest ascender. Complies with AS/NZS 1891.1.2007. Weight 2.7 kg. 2 Sizes XS-M & L-XL.
Harness – Skylotec Pro Specialist Rope Workers Product Code: HARNES011
Recreational Catalogue – Version: 03.2017
The Rescue Pro is the top spec rope workers harness in the series, with its in-built chest ascender and padded straps it will deliver comfort, safety and streamlined efficiency to the user. High quality padding in the hip, leg and shoulder area. Fixable rear fall arrest D-ring. Inbuilt fall indicator. Fast easy fastening system. A total of six tool loops, four on the hip area and one on each leg strap. Highly adjustable creating maximum user comfort. Weight 2.8 kg. 2 Sizes XS-M & L-XL. Complies with AS/NZS 1891.1.2007.
Click Back to Table of Contents
Page 8 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
HARNESSES Harness – Skylotec Sirro 2 Product Code: HARNES012
Harness – Ferno Hi-Safe FH50 Product Code: HARNES013
Full body harness with all mandatory safety features including confined space retrieval attachment points. Front and rear free fall arrest attachment point. Confined space retrieval attachment points. Breathable rear mesh panel keeps the harness in shape. Quick and easy to don and adjust. Fully adjustable, multi size fit. Certified to AS 1891.1:2007. Oil, grease and water repellent webbing.
Part of Ferno Roofers Kit – ROOFKIT002 Harness – Skylotec Rescue Pro 2.0 Product Code: HARNES014
Skylotec Rescue Pro 2.0 Professional Rope Access & Rescue Harness fits like a second skin and provides numerous features, such as integrated, changeable rope clamp, great adjustment opportunities for long working sessions, large side D-rings for working suspended, on the legs high quality aluminium quick buckles, fall indicator on the back, 2 material loops & 2 tool eyelets, material loops on the leg pads give quick access, attached rescue knife. (G-AUS-1083-AL-XS/M or M/XXL or XXL/5XL)
Harness – Petzel Newton Harness (M-XXL) Product Code: HARNES015
Recreational Catalogue – Version: 03.2017
Colour coded straps (yellow/black) provide rapid identification of the upper and lower parts of the harness before donning. Sternal FAST automatic buckle allows the harness to be opened and closed simply and quickly. Shoulder straps and leg loops equipped with self-locking Double Back buckles for quick and easy adjustment. Stowage system for the MGO connectors on fall arrest lanyards, on each shoulder strap. In case of a fall, this system releases the MGO connectors and allows the absorber to be deployed. Fall indicators on the sternal and dorsal attachment points. If a fall indicator is visible after a fall, the harness must be retired. Equipment loops and slots for TOOLBAG tool pouch. Click Back to Table of Contents
Page 9 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Skylotec general purpose full body harness. Supplied karabiner must be worn connected to the two front loops. The award winning Sirro is the most comfortable general purpose full body harness today. It is light and provides maximum wearing comfort and optimum load distribution. The rear fall arrest attachment point is made with cross band supports creating even load distribution in all fall directions. The three layer perforated padding is breathable and transmits moisture away from the skin. Weight 1.1kg. Certified to AS/NZS 1891.1.2007 Available in two sizes S-M & L-XL.
www.heightsafety.com
1300 789 545
TO PURCHASE VIA ONLINE SHOP PLEASE CLICK ON PHOTO’S ROOFERS KITS
Product Code: ROOFKIT001
1 x Full body harness (1104) 1 x 15m Restraint line and adjuster (3108) 1 x Karabiner (K2) 1 x 1.8m Lanyard with tear web absorber (3053) 1 x Anchor sling (3501) 1 x Kit bag (BPBAG-0)
For longer rope lines contact SafetyLink for pricing.
A complete height safety access kit in a bag. Suitable for all trades requiring safe compliant access whilst working at heights. This kit is intended to be used with one anchor point, if multiple anchor points are to be accessed additional karabiners will need to be purchased. Certified to AS/NZ 1891.1 2007.
Product Code: ROOFKIT002 Economy Roofers Safety Kit in Backpack. Designed by industry professionals and tested in the field to meet the day to day requirements of roof workers. All components have been carefully selected for durability and quality ensuring longevity of service while keeping budgets in check.
Roofers Kit – Ferno (HS-DLER-BP) 1 x Hi-Safe FH 50 Full Body harness (HARNESS013) 1 x 15m of 11 mm rope with sewn eyelet and steel screw gate karabiner with personal energy absorber with rope grab and screw gate karabiner (HS-ROPLAN K 3T 15) 1 x 1500 mm Round Sling (SLING009) 1 x Back pack (BAG005)
For longer rope lines contact SafetyLink for pricing. HARNESSES HAVE A 6 DAY LEAD TIME TO BE MADE AS THEY ARE DATED TO LAST FOR 10 YEARS AND THEREFORE NOT HELD AS STOCK.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 10 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Roofers Kit – Spanset (6001)
www.heightsafety.com
1300 789 545
TO PURCHASE VIA ONLINE SHOP PLEASE CLICK ON PHOTO’S ROOFERS KITS
A complete height safety access kit in a bag. Suitable for all trades requiring safe compliant access whilst working at heights. This kit is intended to be used with one anchor point, if multiple anchor points are to be accessed additional karabiners will need to be purchased. Certified to AS/NZ 1891.1 2007.
Roofers Kit – Spanset (6001SA-SPECTRA-0) 1 x Spectre Budget fall arrest harness (1100) 1 x15m Kermantle rope line with shock absorber, snap hook & rope adjuster. (3108-SA-0x15) 1 x 1.5m standard 40mm loop sling (3056) 1 x Roofers Kit Backpack (BPBAG-0)
For longer rope lines contact SafetyLink for pricing.
Product Code: ROOFKIT005 SKYLOTEC Roof Workers Kit. One of the best basic all round general roof access protection kits available. With its easy fit, comfortable and light harness and the ergonomically designed rope grab system the user will feel safe and comfortable at the same time. The personal energy absorber has a unique easy inspection cover that is removable allowing a full inspection of the inner webbing for loading, wet or damage. AS/NZS 1891.1 Certified. Weight: 3.7kg.
Roofers Kit – Skylotec (SET-AUS-002) 1 x Classic CS2 general work harness (G-AUS-0902) 1 x 15m Kermantle rope line, stitched eyelet, karabiner, ergo rope grab,12mm rope (L-0032-15) 1 x Tear web absorber, easy inspection cover, alloy double action snap hooks. (L-AUS-0005-AT) 1 x 1m standard 25mm loop sling (L-0008-1) 1 x 500mm Rope bag with haul loops (ACS-009-4)
For longer rope lines contact SafetyLink for pricing.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 11 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Product Code: ROOFKIT003
www.heightsafety.com
1300 789 545
LANYARDS Lanyard - Spanset (3053-0x1.8) Product Code: LANYRD001 Single lanyard with tear web energy absorber. Steel H1 snap hooks each end (opening 21mm) Certified to AS/NZ 1891.1 2007. Tear Length: 1.75m. Length: 1.8 metres. Rated 25kn. Weight: 1070g. Part of ROOFKIT001
Lanyard - Spanset (3072) Product Code: LANYRD002
Single lanyard with tear web energy absorber. Wire lanyard. Steel H1 snap hooks each end (opening 21mm). Certified to AS/NZ 1891.1 2007. Rated 25kn. Length: 1.8 metres. Weight: 1390g.
Lanyard - Spanset (3058-0x1.8) Product Code: LANYRD004
Twin lanyard with tear web energy absorber. H1 snap hook & H3L scaffold hooks. Certified to AS/NZ 1891.1 2007. Length: 1.8 metres. Weight: 2035g.
Lanyard - Spanset (3058E-0x1.8) Product Code: LANYRD006
Twin elasticated lanyard with tear web energy absorber. H1 snap hook & H3L scaffold hooks. Certified to AS/NZ 1891.1 2007. Length 1.4 - 1.8 metres. Weight: 1723g.
Lanyard - Spanset (3055-0) Product Code: LANYRD008
Single lanyard with tear web energy absorber. H1 snap hook & H3L scaffold hooks. Certified to AS/NZ 1891.1 2007. Tear Length: 1.75m. Length: 1.8 metres. Weight: 1320g.
Lanyard – Spanset ERGO (3053a) Product Code: LANYRD009
Recreational Catalogue – Version: 03.2017
Single lanyard with tear web energy absorber. Length adjustable .75 - 1.8 metres. 140kg maximum user weight. Steel H1 snap hooks each end (opening 21mm) Certified to AS/NZ 1891.1 2007. Rated 25kn. Weight: 1220g. Ideal use on Abseil towers.
Click Back to Table of Contents
Page 12 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
LANYARDS / ROPELINES Lanyard - Skylotec 1.5mtr (L-AUS-0089-1.5) Product Code: LANYRD010 2mtr (L-AUS-0089-2) Product Code: LANYRD011
BFD Rope Lanyard with built in tear web energy absorber. Outer cover is removable by Velcro tabs to both protect and allow visible inspection. 11mm Kermantle rope, 23mm gate double action snap hooks (other connector options available). Certified to AS/NZ 1891.1 2007. Weight: 1kg.
Lanyard - Skylotec
2m (L-AUS-0582-2) Product Code: LANYRD012 1.5m (L-AUS-0582-1.5) Product Code: LANYRD013 BFD Webbing Elastic Lanyard with built in tear web energy absorber. Outer cover is removable by Velcro tabs to both protect and allow visible inspection. One steel snap hook attaches to harness. Two steel scaffold hooks on lanyard ends. AS/NZ 1891.1 2007.
Lanyard - SPANSET Product Code: REC.LANYRD014
SPANSET Twin Leg Adjustable Webbing Lanyard. 0.75 – 1.8m. H1 Snap Hook . H3 Scaffold Hook. (3058A)
Lanyard - Vertical (VAI BERRY SR2) Product Code: REC.LANYRD001
Twin lanyard with tear web energy absorber. Designed for specific use on high ropes course. Designed with two hook back loops for placement of unwanted double hook action. Suitable for instructor use. Certified to AS/NZ 1891.1 2007. Adjustable working length (over 10 options) with two additional anchor tabs.
Rope Line – Spanset (3108) 15 metres - Product Code: ROPELN001 20 metres - Product Code: ROPELN002 30 metres - Product Code: ROPELN003 5 metres - Product Code: ROPELN004
Rope restraint line for access on roof spaces. Snap hook one end. Rope adjuster.
ROPELN001 is part of Spanset - ROOFKIT001 Rope Line – Spanset (3108SAx15) Product Code: ROPELN006
11mm anchorage line. Rope restraint line for access on roof spaces. Snap hook one end. Rope adjuster. Tear web absorber attached. Length 15 metres, other lengths available.
Part of Spanset Spectre Roofers Kit - ROOFKIT003
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 13 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
ROPELINES / RETRACTABLE LANYARDS
ERGOGRIP SK12, Move up and down a roof with ease using the Ergogrip rope grab adjuster. Travel up to 15m from your anchor point with this 15m rope fitted with a steel scaffold hook. Comes with sling lanyard and 18mm 26kN screw gate karabiner. Part of Skylotec Roofers Kit – ROOFKIT005
Rope Line – Ferno (HS-ROPLAN K 3T 15) Product Code: ROPELN010
The adjustable rope line is ideal for roof work and allows flexible work positioning via a steel rope adjuster with Energy Absorber. Supplied with attached screw gate karabiners to secure to anchor point and harness. Available in 15 m, 20 m or 30 m lengths. Part of Ferno Roofers Kit – ROOFKIT002
Retractable Lanyard - Skylotec (HSG-001-2,5) Product Code: RETRLANY003
The Kompakt is the baby of the retractable lanyard range with a 40mm webbing lanyard and a inline shock absorber. It’s simple, safe and economical. 40mm webbing lanyard and a inline shock absorber. 2.5 metre maximum length. Steel screw gate karabiners. Single person use. Weight: 1.1 kg. Size 110 x 110 x 80mm. EN360.
Retractable Lanyard Product Code: RETRLANY004.03 - 3 metres Product Code: RETRLANY004.04 - 4 metres Product Code: RETRLANY004.05 - 5 metres Product Code: RETRLANY004.06 - 6 metres Product Code: RETRLANY004.08 - 8 metres Product Code: RETRLANY004.10 - 10 metres Product Code: RETRLANY004.15 - 15 metres Product Code: RETRLANY004.20 - 20 metres
Recreational Catalogue – Version: 03.2017
HSG HK Skylotec Retractable Lanyard. ABS impact resistant shell. Internals salt-water proof aluminium. 5mm gal cable with impact indicating swivel d/action. 45kN steel snap hook. 23mm gate. 15kN side load.
Click Back to Table of Contents
Page 14 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Rope Line – Skylotec 15 metres (L-0032-15) Product Code: ROPELN007 30 metres (L-0032-30) Product Code: ROPELN011
www.heightsafety.com
1300 789 545
LANYARDS / ABSORBERS Dorsal Extension Strap – Skylotec (L-0147-0,5) Product Code: ABAND001
A-Band Dorsal extension strap (to extend rear attachment point). Length: 500mm. Must be used with a 1.5m personal energy absorber. NOTE: A 1.5m personal energy absorber must be used with this extension strap.
Lanyard – Spanset (3040) Product Code: LADER001.11
Tear web energy absorber. Comes with 2 x Screwgate karabiners. 260mm total length. 600mm maximum fall length. Certified to AS/NZ 1891.1 2007. For use on ladders and pole access kits ONLY.
Lanyard – Spanset (3050) Product Code: ABSORB001
Tear web energy absorber. Certified to AS/NZ 1891.1 2007. Size: 360x35x45mm.
Lanyard – Skylotec (L-AUS-0005-AT) Product Code: ABSORB002
Outer cover is removable by Velcro tabs to both protect and allow visible inspection of the inner "tear web energy absorber". Aluminium double action snap hooks. Overall Length 460 mm.
Lanyard - Skylotec (L-AUS-0005-KOB) Product Code: ABSORB003
Outer cover is removable by Velcro tabs to both protect and allow visible inspection of the inner "tear web energy absorber". Steel Twistlock Karabiner. Size: 30mm.
Lanyard – Spanset (3050) Product Code: ABSORB004
Recreational Catalogue – Version: 03.2017
Tear web energy absorber. Size: 360x35x45mm. Certified to AS/NZ 1891.1 2007. 2 x Screwgate karabiners.
Click Back to Table of Contents
Page 15 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
SLINGS Sling – Spanset (3501) Product Code: ASTRAP001 Heavy duty anchor. Threaded attachment strap with wear pad 1300mm.
Part of Spanset Roofers Kit - ROOFKIT001 Sling – Spanset (3506-Spectre) Product Code: ASTRAP002
Endless attachment sling 1500mm.
Part of Spanset Spectre Roofers Kit - ROOFKIT003 Sling – Skylotec (L-0008-1) Product Code: SLING001
Anchor Sling, 1 metre continuous loop, 26kn, 25mm wide.
Part of Skylotec Roofers Kit – ROOFKIT005 Sling – Ferno (VSL R32KN 1500) Product Code: SLING009
Anchor Sling, 1500mm continuous loop, 25mm wide.
Part of Ferno Roofers Kit – ROOFKIT002 Sling – Spanset (3502) Product Code: REC.SLING001
Endless 25mm attachment strap 1200mm.
Sling – Vertical (VSLR 32KN 0600) Product Code: REC.SLING002
Made from high grade, abrasion-resistant webbing. Available in a variety of colours and lengths, enquire. Manufactured in accordance to AS/NZS 1891. Rated to 32kN (25 mm round).
Sling – Vertical (VSLR 32KN 0300) Product Code: REC.SLING007
Made from high grade, abrasion-resistant webbing. Available in a variety of colours and lengths, enquire. Manufactured in accordance to AS/NZS 1891. Rated to 32kN (25 mm round).
Sling – Vertical (VAS BELAY SL) Product Code: REC.SLING008
Recreational Catalogue – Version: 03.2017
Height adjustable belay station sling for indoor rock climbing centres. For use in conjunction with a ground anchor and harnessed belayer. Reinforced ends with a protective layer for long gym life. Adjustable to 1200 mm, Rated to 16kN.
Click Back to Table of Contents
Page 16 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
Pole Strap - (L-AUS-0581-250) Product Code: POLESTRAP01
Vertical Etrier and Aider Etrier FOUR step Etrier FIVE step
Product Code: REC.ETRIER001 Product Code: REC.ETRIER002
Aider FOUR step Aider FIVE step
Product Code: REC.AIDER001 Product Code: REC.AIDER002
The Etrier and Aider four and five step are ideal for recreational aid climbing, rope access and rescue. The 25 mm flat polyester webbing and dense vinyl stiffening ribs provide excellent rigidity and stability, ensuring ease of foot placement and superior abrasion-resistance. The Etrier folds to a slightly smaller package.
Suspension Trauma Relief Straps – Spanset (SG238) Product Code: TRAUMA001
Recreational Catalogue – Version: 03.2017
Suspension trauma relief straps – pair. Tidy zip away pack that fits on most harnesses. Quick Adjustment to suit the height of any user. Simple design.
Click Back to Table of Contents
Page 17 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Traditional 45mm webbing POLE STRAP with outer web protection and super efficient quick action slide adjustable buckle. Minimum adjustable length 115cm. Designed for work positioning, assisted climbing & restraint applications on structures such as mono poles, masts & towers. Available in various lengths. Max. number of persons: 1 Max. rated load: 100 kg Karabiner on device: SNAP HOOK Karabiner on rope: SNAP HOOK Material: ALUMINIUM, POLYESTER, STAHL Strap material: POLYESTER
www.heightsafety.com
1300 789 545
Temporary Horizontal Lifelines - Spanset Suitable for temporary installations to gain a safe work space at height.
One man per span. 3400 Horizontal webbing static line. 18 metre, c/w ratchet tensioner and bag. (3400)
Two men per span. 3400UK Horizontal webbing static line. 18 metre, c/w ratchet tensioner and bag. (3400UK)
Product Code: SAFETYLINE001.01
Product Code: SAFETYLINE001.02
Temporary Horizontal Lifeline - Skylotec (L-0329) Product Code: SAFETYLINE002
Heavy duty 50mm webbing. Two person rated and supplied with protective carry bag. Maximum length 20mt. The anchoring points must be set for a load of 25kN. Suited for use with anchor slings and abseil rated anchor points over 25kN.
Bosuns Chair – Spanset (FPFV8020) Product Code: REC.CHAIR001
The Bosun’s chair is ideal for situations where a worker will be suspended for extended periods of time, such as silo cleaning, panel painting and building inspections. Adjustable waist and large seat area with back support. Colour may vary depending on stock.
Bosuns Chair – Skylotec (G-0205) Product Code: SEAT001
Rope access workers seat. Light, compact & comfortable at 1.4kg. Aluminium base plate. Easily adjustable with solid construction. Compatible with most types of harness’s with side holding eyelets.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 18 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
HELMETS HELMET SHADE - FERNO (VAS SUNBRERO) Product Code: HELMSHADE001
Sunbrero provides valuable sun protection blocking 100% of UV rays. Additional detachable legionnaire's flap assists in keeping the back of your neck protected from the sun and cooler. Made from durable cordura nylon. Water resistant for rainy days. Constructed with an elastic band that grips to most helmets and secures to headlamp retainer clips.
Industrial Helmet - Skylotec – Skycrown (BE-016-WE) Product Code: HELMET001
Skylotec skycrown light weight rescue helmet. Suited for use by rope access workers and rescue teams. Quick dial rear adjustment strap. Plastic shell with air vents. Available in black, blue, orange and red. Complies with EN397, for rope access workers. Closing mechanism of Industrial Helmet must open at a force of 15 kg to avoid strangulation. Adult Size only. (BE-016-WE) For enquiries on available colours contact
[email protected]
KASK HP Plus AS Helmet (BE-016-WE) Product Code: HELMET002
The NEW KASK HP Plus is a high-tech helmet designed for professional rescue and working-at-height applications and is particularly suited for: Emergency rescue, Rope access technicians, Arborists, Specialists working at height. A lightweight, compact and feature-rich helmet, the new HP Plus AS is certified to AS/NZS1801 Occupational Protective Helmets and available standard in white, yellow and red.
AirBorne Hard Hat (HHV6MP) Product Code: HELMET003
RECREATIONAL ONLY
Certified to AS/NZS1801-SAI Global Certified Lic 20500. 10mm micro peak for increased vision whilst working at heights. 6-point Webbed harness. Single hand adjustment wheel harness, quick and precise to manipulate even while wearing gloves. Fully adjustable 4-points chinstrap with quick release buckle. A universal attachment slot enables firm fitting of a ProChoice Visors and Earmuffs. Ideal for high wind areas when a secure fit is needed quickly. Colours – White, Yellow & Orange.
Recreation Helmet – Edelrid Ultralight Product Code: REC.HELM002
Edelrid Ultralight Helmet (54-60cm) (Colours: Red, Night, Snow, Turquoise, Orange) (EDE40021)
Product Code: REC.HELM003
Edelrid Ultralight JUNIOR Helmet (48-58cm) (Colours: Red, Snow) (EDE40020) Quite simply put this is the best no gimmicks, highly functional and industry proven helmet around, suitable for many uses and a great allrounder. Typically used in outdoor education centres and adventure parks. Highly adjustable suspension harness with quick release chin strap allows greater comfort and easy novice use.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 19 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com RECREATIONAL ONLY
1300 789 545
WILD COUNTRY 360 Product Code: REC.HELM004
ELDERID FOLDING HELMET RECREATIONAL ONLY
Product Code: REC.HELM005
RECREATIONAL ONLY
Belay Device – Elderid Eddy (EDE60001) Product Code: REC.DESC001
RECREATIONAL ONLY
Strong & compact due to its small pack size. The shell sides slide into the top and the back folds in, reducing the helmets pack volume by 50%, made of a high-strength abrasion and impact-resistant injected material. EPS foam is used in the upper half of the shell as it provides the best shock absorption, while the sides are made of EVA which is softer, providing a better and more comfortable fit. The rear panel of the Madillo covers the back of the neck providing additional protection. The size is adjustable from 52 to 62 cm, made so by squeezing the rear panel forwards once the helmet is on your head. The Madillo is a compact, lightweight and comfortable helmet saving a lot of space in the backpack.
Simple to use belaying device with auto lock function. Ideal for use in single rope applications when abseiling or belaying. Easy to set up as the rope simply follows logically the rope flow as permanently marked on the Eddy. Eddy offers a controlled descent with an emergency brake system which eliminates the “panic pull” syndrome which can lead to serious injury, Suitable on 9mm to 11mm Ropes.
Descender - Figure 8 Product Code: REC. DESC002
RECREATIONAL ONLY
Your typical standard abseil/belay device. For use on 9 – 10mm ropes. Rated to 35kN. Available in polished finish only.
Descender – Kong Belay Tube (KON49400) Product Code: REC.BELAY001
RECREATIONAL ONLY
The Kong 940A Chuy’s dual friction profile allows you to choose variable rate of descent in abseiling combined with two breaking options. Rubber coated wire cable keeper, Anodized finish. For use with 8 – 12mm ropes.
Descender – Tuber Belay Plate (VAUA AB01B) Product Code: REC.BELAY002
A new generation of descender-belayer in forged aluminium alloy offering increased braking power. Various colours.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 20 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
A classic, stylish, super strong cross-season performer, the 360 helmet has been designed to provide the highest levels of all round protection. The 360 offers market leading front, side and rear impact protection, making it one of the safest helmets available. Weight: 360g. Size: 53.61cm.
www.heightsafety.com
1300 789 545
KARABINERS Karabiner - (K2) Product Code: KARBNR001
Steel Oval Screwgate. Gate opening 15mm. Rated 23kn. Weight 157g.
Karabiner – (H-121) Product Code: KARBNR003
Skylotec KOBRA TRI H-121. Triple lock captured eye. Inner eyelet: 22 mm. Breaking load, gate: 22 kN. Weight: 0.27 kg. Material: Steel (Electrogalvanized).
Karabiner - Steel Triplock Gate Product Code: KARBNR004
Break strength: 50 kN. Optional Captive Bar, Hardened zinc plated steel. Gate opening: 26 mm. Weight: 267 g. Dimensions: 117mmx77mm.
Karabiner – Stainless Steel Triplock Gate Product Code: KARBNR005
Optional captive bar, Stainless Steel. Gate opening: 18 mm. Break strength: 35 Kn. Weight: 192 g. Dimensions: 110 mm x 63.5 mm.
Karabiner - Alloy Triplock Gate Product Code: KARBNR006
Break strength: 30 kN. Extra light, drop forged alloy karabiner. Optional captive bar. Weight: 79 g.
Karabiner - Steel Screw Gate Product Code: KARBNR008
High strength, hardened zinc plated steel. Optional captive bar, Gate opening: 26 mm. Break strength: 50 kN. Weight: 253 g. Dimensions: 117mmx77mm.
Karabiner – Stainless Steel Screw Gate Product Code: KARBNR010
Optional Captive bar, Gate opening: 19 mm. Break strength: 35 kN. Weight: 182 g. Dimensions: 108 mm x 62 mm.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 21 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
KARABINERS Karabiner - Steel Screw Gate Product Code: KARBNR011
Classic screw gate karabiner with very high break strength. Optional captive bar. Individually tested. Gate opening: 21 mm. Break strength: 50 kN. Weight: 178 g. Dimensions: 108 mm x 62 mm.
Karabiner - Steel TripLock Gate Product Code: KARBNR012
Optional captive bar provided Gate opening: 19 mm Break strength: 50 kN Weight: 195 g. Dimensions: 109 mm x 61 mm
Karabiner – Alloy Screw Gate Product Code: KARBNR013
Lightweight, symmetrical oval profile Gate opening: 21 mm Break strength: 24 kN Weight: 75 g. Dimensions: 111 mm x 62 mm
Double Action Snap Hook – (H1) Product Code: KARBNR014
Steel Double action snap hook. Break strength: 25 kN. Gate opening 24mm. Weight 305g. Ideal for use on high ropes course safety lines.
Karabiner – SafeLink Product Code: KARBNR015
SAFETYLINK Karabiner: Tri-Lock, 30kn. Gate opening 19mm. Alloy steel Karabiner, silver zinc plated. Auto Locking. 3 step opening. 16 kN rated gate. 105mm long, 62mm wide. Tested according to ANSI Z359.12, CSA Z259.12-11, EN 362. For use with SafetyLink shuttles.
Karabiner – FERNO Piller S CT Product Code: KARBNR017
Zinc-plated steel karabiner with straight gate. Designed for lowering, working at height, industrial safety and rescue. (VCT 3C4470A)
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 22 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
RAPIDES Maillon Rapide Standard
Size Length Gate mm mm mm Standard - Zinc Plated Steel REC.RAPID005 8 74 11 REC.RAPID001 10 89 12 REC.RAPID002 12 104.5 15 Standard - Stainless Steel REC.RAPID006 8 74 11 REC.RAPID007 10 91 14 REC.RAPID008 12 116 14
Product Code
Work Load kg 700 1100 1500 1100 1800 2500
Maillon Rapide - Large Opening
The wider mouth opening makes connecting easier. Suitable for anchor and rigging connections.
Size Length Gate mm mm mm Large Opening – Zinc Plated Steel REC.RAPID009 8 88 17.5 REC.RAPID010 10 105.5 20.5 REC.RAPID011 12 124 23.5 REC.RAPID012 16 161 29.5 Large Opening – Stainless Steel REC.RAPID013 8 88 17.5 REC.RAPID014 10 105.5 20.5 REC.RAPID015 12 124 23.5
Product Code
Work Load kg 650 1000 1250 2500 980 1600 2200
Maillon Rapide – Pear
Ideal in situations where a three-way load is exerted. Also used for climbing rope, anchors and harness-to-chest harness connectors.
Size Length mm mm Pear Shaped – Zinc Plated Steel REC.RAPID016 8 53 REC.RAPID017 10 63 Product Code
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Height mm
Gate mm
Work Load kg
100 118
17.5 20.5
480 720
Page 23 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
The Maillon Rapide Standard is extremely strong when loaded along the long axis. Suitable for anchor and rigging connections.
www.heightsafety.com
1300 789 545
RAPIDES Maillon Rapide - Delta Ideal in situations where a three-way load is exerted. Also used for climbing rope, anchors and harness-to-chest harness connectors.
Product Code
Size mm
Length mm
Height mm
Gate mm
Work Load kg
8 10 12
56 66 75
73 87 104
10 12 15
550 900 1100
10
66
87
12
1250
Delta - Zinc Plated Steel REC.RAPID018 REC.RAPID003 REC.RAPID004 Delta - Stainless Steel REC.RAPID019 Maillon Rapide - C
Commonly used when connecting sit and chest harnesses. C Shape – Zinc Plated Steel.
Product Code REC.RAPID020
Size mm
Length mm
Gate mm
Work Load kg
10
86
10
10 kN
Collared Eyebolt: Female Thread Product Code: EYEBT004
16mm internal thread. 35mm internal diameter of eye. 24kn rated. Stainless Steel construction. Also available in steel and in various sizes/lengths to suit.
Collared Eyebolt: Male Thread Product Code: EYEBT005
16mm external thread. 35mm internal diameter of eye. 24kn rated. Stainless Steel construction. Also available in steel and in various sizes/lengths to suit.
Nut, Bolt and Washer Product Code: Enquire
Enquire about our competitive pricing on our wide range of nuts, bolts and washers.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 24 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
Rope Adjuster Product Code: ADJUST001
Pole Access Kit Product Code: POLEKIT001 RECREATIONAL ONLY
Create safe fast access with this auto locking vertical shuttle and personal energy absorber. Ideal on giant swings and high ropes elements. Eliminating the need to clip individual staples while climbing. Includes cable, anchor bolts, vertical shuttle, karabiners and personal energy absorber. Easy installation.
Product Code POLEKIT001.01 POLEKIT001.02 POLEKIT001.03 POLEKIT001.04 POLEKIT001.05 POLEKIT001.06
RECREATIONAL ONLY
Product Description Cable: 8mm G2070 7x19 20mmx400mm Eyebolt/Washer/2 Nuts 8mm Wire Rope Thimbles - Galvanised 8mm Wire Rope Ferrules - Aluminium 8mm Wire Rope Grip Pole Access Kit Assembly: 1 x 8mm Vertical Shuttle 2 x Steel Karabiners 1 x 100mm Express Sling (REC.SLING009)
LadderLink Pole Bracket Product Code: LADFX006
Creates a safe and secure ladder entry point. Designed to be mounted to poles or trees. Secures and stabilizes the ladder against rounded surfaces. Can be utilised as a permanent mount for ladders that are being raised and lowered, limiting access. Made from marine grade aluminium with 2x saddles and 4x stainless steel bolts with self-locking nuts for permanent ladder mounting. Fast easy installation with 5 fixing holes. Weight 2kg. 30cm wide x 25cm high x 25cm deep.
Vertical Lifeline Shuttle with Karabiner Product Code: LADER001:.10
Vertical Lifeline Shuttle 316 stainless steel. Karabiner - Alloy steel, silver zinc plated. Will track up or down with user vertically and self lock when a fall occurs. Can be installed/removed mid-line. For use on 8mm stainless steel or galvanised wire only. Must be used in conjunction with a personal energy absorber. Meets AS/NZS1891.3.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 25 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Rope adjuster to suit 11-13mm rope for horizontal applications. Simple to use with a sliding action and auto lock cam function when a fall occurs. For use in conjunction with a personal energy absorber and height access rope.
www.heightsafety.com
1300 789 545
PULLEYS RECREATIONAL ONLY
Pulley - ALF™ Auto Locking Pulley
The ALF™ Locking Pulley is a uniquely designed locking pulley system combining an inertia reel/speed sensitive locking system into a specially developed grooved pulley wheel. Originally developed for the Challenge Course industry which needed a simple mechanical method of protecting multiple climbers en route around a ropes course, the ALF provides clear advantages in height safety and rescue scenario providing a climb assist system for workers on towers and masts, wind turbines and construction. The ALF™ Locking Pulley uses AS/NZS 4142.3 or EN 1891 compliant 11 mm static rope and can be easily and quickly rigged by a competent person.
Becket
RECREATIONAL ONLY
Pulley - Single Rope Product Code: REC.PULL003
RECREATIONAL ONLY
Pulley - Single Rope Nylon Wheel - Product Code: REC.PULL007.01 Stainless Steel Wheel - Product Code: REC.PULL007.02
RECREATIONAL ONLY
EVO ZIP PULLEY (KON18621) Evolution of the first pulley with integrated connector which eliminates any possibility of error. Improved ergonomics of the handle and the simplicity of use thanks to the new lever openable with one hand. The special design ensures the correct positioning on the rope in any situation. Equipped with ball bearings for perfect smooth rolling. It works on both ropes & metal cables up to 13 mm in diameter.
Ideal giant swing haul line pulley, has low wear wheel. Precision high speed bearings. Solid 316 stainless steel construction. Weight: 303g. Size: 130mm x 70mm x 50mm. Will accommodate rope from 10mm to 16mm. Meets AS/NZS1891.2. Meets DIN EN12278 (2007-08).
Pulley - Multi Point Product Code: REC.PULL006
Recreational Catalogue – Version: 03.2017
Idea for flying fox activities, multiple attachment points. Premium quality high speed bearings. Drop resist hooks, low wear wheels to minimise cable damage. 316 Stainless Steel body. Weight: 1.2kg. Size: 165mm x 145mm x 43mm. Will accommodate rope from 10mm to 16mm. Meets AS/NZS1891.2. Independently tested by a NATA test facility to meet international standards for pulleys DIN EN 12278 (2007-08). Click Back to Table of Contents
Page 26 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Without Becket - Product Code: REC.PULL001 With Becket - Product Code: REC.PULL002
www.heightsafety.com
1300 789 545
SafetyLink Friction Pulley RECREATIONAL ONLY
Product Code: REC.PULL008
Solid 316 stainless steel construction for long wear. Suitable for use with 9mm-13mm ropes. Reduces rope wear due to its low shear factor and creates more friction to help with controlled descents. For use on permanent belay set ups such as climbing walls and high ropes activities. Rated to 15kn. Weight: 1kg. Size: 125mmx120mmx40mm. Meets AS/NZS1891.2.
Brake Block
RECREATIONAL ONLY
Product Code: FOXBRAKEBLOCK
SafetyLink’s brake block is for use in assisting to arrest participants at the end of flying fox’s. Suits 8mm – 18mm Cable. All Hex head bolts, washers, spring washers & nuts are 304 Stainless Steel. Brackets are made from one piece 304 Stainless Steel for long life cycle. Black high quality nylon ram blocks for minimum wear on cable and pulleys. Dual anchor points allow for easy rotation allowing maximum block life. Comes with a steel karabiner for ease of attachment to a brake line. Weight: 5.5kg. Size: 250mm x 210mm.
Galvanised Cable Steel Wire Rope (Cable)
Large selection of Steel, Stainless steel or Galvanized constructions available. Please enquire. Common sizes and specifications for ropes course construction
Product Code STAT.CABLE003 STAT.CABLE004 STAT.CABLE010 STAT.CABLE011 STAT.CABLE012
Size mm
Description
Roll M
10 11 11 8 12
7x19 Galvanised 7x19 Galvanised 6x25 Galvanised. G2070. 7x19 Galvanised 6x25 Galvanised. G2070.
1000 1000 1000 1000 1000
Stainless Steel Cable Wire Rope (Cable)
Large selection of Steel, Stainless steel or Galvanized constructions available. Please enquire.
Product Code STAT.CABLE001.01
Recreational Catalogue – Version: 03.2017
Size mm
Description
Roll M
8
7 x 7 wire rope, S/ Steel
305
Click Back to Table of Contents
Page 27 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
ROPE / CORD Response Abseil Rope XT Product Code:REC.ROPE001
XT Static Abseil Rope. Diameter: 11mm. Length: 200m roll. Nylon cord, Nylon sheath
Edelrid Super Static Rope Product Code: REC.ROPE004
Superstatic 11mm diameter. Length: 200m. One of the most hardwearing & durable abseil lines on the market. Colour: Snow
Dynamic Safety Rope Product Code:REC.ROPE005
Edelrid Dynamic Rope - Dynamite 11mm x 200m. (EDE01080)
Product Code:REC.ROPE005.1
Edelrid Dynamic Rope - Dynamite 11mm x 50m. (EDE01079)
Yatch Master Rope Product Code:REC.ROPE012
Length: 100m Roll. Colour: White with Blue Fleck. Diameter: 16mm. Suitable as a haul line for giant swing activities. Other diameters available.
Tower Gym Rope Product Code: REC.ROPE014
Dynamic Climbing Rope. Ideally suited to top rope applications for outdoor centres. Diameter: 10.5mm. Length: 200m Roll. Colours: Green/Oasis or Red/Lava.
Rated Cord 100m Roll
Ideal for use on giant swings and accessory applications.
2mm 0.6kN 3mm 2.4kN 4mm 4.1kN 5mm 6.2kN 6mm 9.8kN 7mm 13.4kN 8mm 16.8kN
REC.CORD002 REC.CORD003 REC.CORD004 REC.CORD005 REC.CORD006 REC.CORD007 REC.CORD008
Tool Saver – Skylotec (ACS-0182) Product Code: TOOLSAV001
Recreational Catalogue – Version: 03.2017
Tool Saver. Length 700mm. Weight 11g. Click Back to Table of Contents
Page 28 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
Pulley System – Spanset (4000) Product Code: RESCUE001
Rescue Kit – Spanset (Gotcha) (Gotcha 50) Product Code: RESCUE002 (Gotcha 75) Product Code: RESCUE004 (Gotcha 100) Product Code: RESCUE005
GOTCHA rescue kit. Attach a casualty who is suspended by a fall arrest lanyard. Raise casualty in order to release their current attachment. Raise or lower the casualty to a point of safety.
Rescue Kit – Skylotec (A-028)
The Milan is designed to be used to lift/lower a fallen worker to safety with minimum user effort and knowledge. With a large winding wheel delivering 8:1 ratio for lifting and the ability to invert the system to allow the operator to descend to the fallen worker. When used from a work plat form above a “telestick” can be used to attach the fallen worker and lift/lower them to safety. Rated for two people (280kg). Maximum rope length 500m. Weight 3kg. Maximum descent rate 0.9 metres per second.
Product Code: RESCUE010 Product Code: RESCUE011 Product Code: RESCUE012 Product Code: RESCUE013 Product Code: RESCUE014 Product Code: RESCUE015 Product Code: RESCUE016
Skylotec Milan 2.0 Hub with 10m Rope Skylotec Milan 2.0 Hub with 20m Rope Skylotec Milan 2.0 Hub with 30m Rope Skylotec Milan 2.0 Hub with 40m Rope Skylotec Milan 2.0 Hub with 50m Rope Skylotec Milan 2.0 Hub with 80m Rope Skylotec Milan 2.0 Hub with 100m Rope
Rope Bag – Skylotec (ACS-0112) Product Code: BAG001
Large rope bag 460grams. 400 x 250 x 250mm. Heavy duty construction with draw string closure. With compression straps and padded shoulder strap.
Lift Bag – Skylotec (ACS-0134) Product Code: BAG002
25 Litre gear bag. 400mm high x 300mm diameter. Heavy duty nylon construction with draw string closure. Reinforced handles that “wrap” the bag for strength.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 29 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
This rescue/access pulley system with a 4.1 mechanical advantage features an Auto locking brake mechanism should the control rope be released. Can be locked off for prolonged suspension or be selfoperated or by a second person. Kernmantle Rope. 2 x K1 Karabiners. E2000 x 2 Round Sling.
www.heightsafety.com
1300 789 545
BAGS Tool Bag – Skylotec (ACS-0055) Product Code: BAG003
This bag is designed for tools and materials. 330mm high x 300mm diameter. Solid base plate. Heavy duty construction. 15 litre capacity. 500grams.
Kit Bag – Spanset (BPBAG-0) Product Code: KITBAG001
Roofers Kit Backpack.
Part of Spanset Roofers Kit - ROOFKIT001 & ROOFKIT003.
Rope Bag – Spanset (RBAG) Product Code: KITBAG002
Storage for 100 metre rope. Drawstring and shoulder straps. Does not include rope.
Jumbo Kit Bag – Spanset (ERGO-L) Product Code: KITBAG003
Jumbo kit bag.
Storage Bag – Spanset (BA112) Product Code: KITBAG004
Harness storage bag with drawstring. Colour may vary.
Backpack – Ferno (VBI FERNOBACKPACK) Product Code: KITBAG007
Industrial backpack.
Part of Ferno Roofers Kit - ROOFKIT002.
Kit Bag – Skylotec (ACS-0009-4) Product Code: KITBAG008
Nylon water resistance carry bag. 300 x 500mm.
Part of Skylotec Roofers Kit - ROOFKIT005.
Kit Bag – SafetyLink Product Code: KITBAG009
25L Dry Bag with Back Straps. Side handle. Ergonomic durable padded back. Adjustable chest and waist straps.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 30 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
www.heightsafety.com
1300 789 545
STANDARD TERMS AND CONDITIONS OF SALE The following terms and conditions of sale (“Terms of Sale”) shall apply to and form part of any contract for the supply of goods and services (“Goods”) by SAFETYLINK PTY LTD (“the Company”) to another party (“the Purchaser”).
1.2 1.3 2. 2.1 2.2
2.3
3. 3.1 3.2
3.3 3.4 3.5
QUOTATION No quotation given by the Company to the Purchaser shall constitute an offer. Any order from the Purchaser to the Company for the supply of Goods shall not be binding upon the company until accepted by the Company. Prices given in any quotation by the Company are applicable to that quotation only and will not apply in any other instance. Quotations are valid for a period of thirty (30) days from date of issue by the Company or otherwise specified in the quotations. PURCHASE ORDERS When ordering, an official order is to be submitted by the Purchaser to the Company quoting an order number, full description of the Goods to be purchased and the delivery time and address. Reference to the Company’s quotation number to the Purchaser should also be made (where applicable). These Terms of Sale apply to the Purchaser and to the Company in respect of Goods ordered by the Purchaser and any terms and conditions set out in the Purchaser’s order deviating from or inconsistent with these Terms of Sale will not bind the Company notwithstanding any statement by the Purchaser in its order that its terms and conditions shall prevail over these Terms of Sale. A contract shall only be or be deemed to have been entered into between the Company and the Purchaser for the supply of the Goods when the Purchaser’s order has been accepted by the Company in writing. PAYMENT The Purchaser must pay the Company for the Goods in full, by cash, credit card payment or direct debit into the Company’s nominated bank account, at the time an order is placed, unless credit is extended to the Purchaser by the Company. The extension of credit to the Purchaser by the Company shall be at the sole discretion of the Company and, where extended, unless otherwise advised in writing by the Company, the Company requires payment by cash, credit card payment or direct debit into the Company’s nominated bank account 24 hours prior to delivery of the Goods to the Purchaser. Without in any way limiting the Company’s right to require payment in full on the due date, the Company may at its sole discretion, charge interest on overdue accounts at the rate of 2.5% above the National Australia Bank’s variable Benchmark lending rate as from time to time applicable. The Purchaser agrees that the Company shall be entitled to use the services of a credit agency from time to time to obtain information concerning the Purchaser (and where the Purchaser is a company, its Directors) in order to assess the Purchaser’s credit worthiness. Time specified for payment is of the essence. This clause 3 is an essential term of these Terms of Sale.
4.
INDEMNITY Without prejudice to any other rights the Company may have against the Purchaser, and to the extent permitted by law, the Purchaser shall indemnify the Company for, and save it harmless from any loss, damage or expense (including, without limitation, costs, whether or not the subject of a court order) incurred by it should be Purchaser breach any of these Terms of Sale or cancel any order or part thereof for the Goods after acceptance by the Company.
5. 5.1 5.2 5.3 5.4 5.5 5.6
DELIVERY Unless agreed in writing the Company shall arrange for delivery of the goods (“Delivery”) to the Purchaser’s nominated delivery point. The Company is entitled to charge a fee for Delivery. The Company is deemed to have delivered the Goods when they are made available for unloading at the Purchaser’s nominated delivery point. The Purchaser is responsible for unloading the Goods from the Company’s delivery vehicle. If the Goods are to be collected by the Purchaser from the Company’s store Delivery occurs when the Goods are loaded on the Purchaser’s vehicle. The Company is not liable for any claims for non-fulfillment or late Delivery of Goods or for any loss or damage (including consequential loss or damage) suffered by the Purchaser arising from delay in Delivery or failure to deliver due to circumstances beyond the Company’s reasonable control and the Purchaser shall accept and pay for the Goods notwithstanding late Delivery. The Purchaser shall in its purchase order advise the Company of the nominated delivery point and required delivery time. Unless otherwise agreed by the Purchaser and the Company, the Company shall be entitled to deliver the Good in one or more lots. Where Delivery of the Goods is affected by way of part Delivery the Company shall be entitled to invoice the Purchaser for pro-rata progress payments in respect thereof. Notwithstanding the Purchaser’s inability to accept Delivery of the Goods, the Company shall be deemed to have delivered the Goods in accordance with these Terms of Sale and the Goods shall be at the Purchaser’s risk from the time when the Goods have been loaded onto the Purchaser’s collecting vehicle or delivered to the Purchaser’s nominated delivery point (as the case requires).
5.7 5.8 5.9
6.
ADDITIONAL CHARGES The Company reserves the right to charge the Purchaser for any costs charges or expenses whatsoever that the Company may incur as a result of. A B C D
7.
vehicle or wagon detention of the Goods (to the extent the same is not caused or contributed to by the Company). demurrage on ships as a consequence of any act or omission of the Purchaser. any special requirements or stipulations of the Purchaser accepted by the Company but not provided for in the Terms of Sale. any increase in duties, taxes, freight, insurance or other charges or expenses from the date of acceptance of the Purchaser’s order by the Company to the date of Delivery.
STORAGE If the Company notifies the Purchaser that the Goods are ready for Delivery and the Purchaser requests the Company to hold the Goods on its behalf, such Goods will be held by the Company at the Purchaser’s risk, and the Company shall be entitled to charge storage fees in respect of the Goods so stored.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 31 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
1. 1.1
www.heightsafety.com 8. 8.1 8.2
CLAIMS The Purchaser shall inspect the Goods immediately upon Delivery and, if the Goods are damaged or not otherwise in conformity with the contract relating to their supply, shall give written notice to the Company of the details in respect thereof within seven days of the date of Delivery. Any Goods the subject of a notice under clause 8.1 shall be left in the state and condition in which they were delivered until such time as the Company or its duty authorized agent has inspected the Goods, such inspection to be carried out within a reasonable time after notification by the Purchaser. If the Goods are not so left in the state and condition in which they were delivered, the Purchaser shall be deemed to have accepted the Goods and shall pay the purchase price for the Goods to the Company. Acceptance of the Goods shall be deemed for all purposes to have taken place when Delivery has occurred.
8A. 8A.1
RETURN OF GOODS No Goods may be returned by the Purchaser to the Company without prior written authorisation from the Company. This authorisation will only be given where the Goods are incorrectly delivered by the Company to the Purchaser or where the Goods are incomplete or defective (other than as a consequence of the acts of the Purchaser or its agents). 8A.2 In order to obtain authorisation under clause 8A.1, the Purchaser must contact the Company. The Goods returned must be accompanied by all appropriate documentation, all applicable packaging and all contents of the Goods as originally supplied by the Company to the Purchaser. 8A.3 The Purchaser must dispatch all incorrectly delivered, incomplete or defective Goods for return to the Company; (a) in the case of incorrectly delivered Goods, within 10 days of delivery of the Product to the Purchaser; or (b) in the case of defective Goods, within 10 days of the Purchaser becoming aware of the defect. 8A.4 Subject to the Purchaser strictly complying with the provisions of this clause, the Company will: (a) provide a full refund to the Purchaser for incorrectly delivered Goods; and (b) provide the Purchaser with a credit in respect of defective Product. (c) arrange for the collection and uplifting of defective goods 8A.5 All Goods returned by the Purchaser must be received by the Company at the address noted in this Agreement unless otherwise notified to the Purchaser by the Company. 8A.6 No Goods will be accepted for return by the Company unless agreed in writing by the Company prior to such return and then only upon conditions acceptable to the Company and at the Purchaser’s entire risk as to loss or damage. Where the Company agrees to accept Goods for return, the Company’s then current restocking charge, as varied from time to time, will be charged to the Purchaser and shall be immediately payable. 8A.7 Notwithstanding sub-clauses 8A.1 to 8A.6, the Company may, at its sole discretion, elect in writing to accept returned Goods. The Goods returned must be: (a) accompanied by all appropriate documentation, all applicable packaging and all contents of the Goods as originally supplied by the Company to the Purchaser; (b) returned by pre-paid freight within thirty (30) days of Delivery; and (c) in the original, resalable condition. The Company reserves the right to charge the Customer 10% of the value of the Product for the Company’s re-stocking fee. This restocking fee is a genuine pre-estimate of the Company’s loss and expenses from accepting the returned Goods. 9. 9.1 9.2
9.3
9.4
9.5 9.6
10.
PASSING OF RISK AND RETENTION OF TITLE Whilst the risk in the Goods passes on Delivery, legal and equitable title remains with the Company until payment in full for all debts accrued or owed to the Company is made. The Purchaser may sell or deal in the ordinary course of business with Goods and with the interest of the Company in the Goods and may for the purpose of such sale or dealing part with possession thereof but the proceeds of any sale or dealing with be held by the Purchaser on trust for the company. The Purchaser hereby agrees to accept this appointment as bailee and fiduciary. Notwithstanding the above, the Company reserves the following rights in relation to the Goods until all amounts owed by the Purchaser to the Company are fully paid A legal and equitable ownership of the goods. B to enter the Purchaser’s premises (or the premises of any associated company or agent where the Goods are located) without liability for trespass or any resulting damage and retake possession of the Goods, and C to keep or resell any of the Goods repossessed pursuant to (b) above. In the event that the Goods are resold, or goods manufactured using the Goods are sold, by the Purchaser, the Purchaser holds on trust such part of the proceeds of any such sale as represents the invoice price of the Goods sold or used in the manufacture of the Goods sold in a separate identifiable account as the beneficial property of the company and must pay such amount to the company upon request. Notwithstanding the provisions above the Company is entitled to maintain an action against the Purchaser for the purchase price of the Goods. Where the Purchaser processes the Goods or incorporates them in or with any other product before property has passed to the purchaser, the new product shall be separately stored or marked in a manner which makes such new product readily identifiable as the Goods of the Company. If payment for the Goods is not made by the Purchaser by the due date specified by the Company to the Purchaser then the Purchaser shall return the goods to the company on demand. If the Purchaser does not return the goods to the Company within 48 hours of receipt of the demand, the Company shall be entitled to enter upon the Purchaser’s premises at any time to do all things necessary to recover the Goods. The Purchaser shall be liable for all costs associated with the exercise by the Company of its rights under this clause, which shall be repayable on demand. DEFAULT Should the Purchaser fail to make due payment for any Goods supplied by the Company or commit a breach of any term of the sale, or being a natural person commit an act of bankruptcy, or being a corporation by act or omission enables the appointment of an administrator, scheme manager, trustee, official manager, receiver, receiver and manager, liquidator or any other person authorized to enter into possession or assume control of any property of the Purchaser pursuant or a mortgage or other security, the Company may, without prejudice to any other rights it may have, do any or all of the following.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 32 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
8.3
1300 789 545
www.heightsafety.com A B C D
11.3
11.4
11.5
11.6 11.7
Withdraw any credit facilities which may have been extended to the Purchaser and require immediate payment of all moneys owing or accrued. Withhold any further deliveries of Goods or performance of services required under the accepted purchase order. In respect of Goods already delivered, enter into the Purchaser’s premises to recover and resell same for its own benefit. Suspend and/or terminate performance of any other contracts which the Company has with the Purchaser.
WARRANTIES To the extent permitted by law all implied conditions, guarantees, warranties and undertakings are expressly excluded. Except as provided in this clause the Company shall not be liable for any loss or damage, whether direct or indirect (including consequential losses or damage) arising out of any breach of contract by the Company or any negligence of the Company, its employees or agents. Should the Company be liable for a breach of a consumer guarantee, condition or warranty implied by the Australian Consumer Law (not being a guarantee, condition or warranty implied by Sections 51, 52 and 53 of that Law) then its liability for a breach of any such guarantee, condition or warranty express or implied shall be limited, at its option, to any one or more of the following. A in case of Goods (i) the replacement of the Goods or the supply of equivalent Goods. (ii) the repair of the goods, (iii) the payment of the cost of replacing the Goods or acquiring equivalent Goods. (iv) The payment of the cost of having the Goods repaired. Provided that any such Goods are returned to the Company by the Purchaser at the Purchaser’s expense. B in the case of services (i) the supply of the services again, (ii) the payment of the cost of having the services supplies again. The Company will not liable for the costs of recovery of the Goods from the field, loss of use of the Goods, loss of time, inconvenience, incidental or consequential loss or damage, nor for any other loss or damage of her than as stated above, whether ordinary or exemplary, caused either directly or indirectly by use of the Goods. The Company warrants that at the time of shipment, Goods manufactured by it will be free from defects in material and workmanship. In the absence of a modified written warranty, the Company agrees to making good any such defects by repairing the same or at the Company’s option by replacement, for a period of (1) one year from the date of shipment. This limited warranty applies provided that: (a) defects have arising solely from faulty materials or workmanship; (b) the Goods have not received maltreatment, inattention or interference; (c) the Goods have been installed in accordance with the Company’s Installation Handbooks using only products supplied by the Company; (d) accessories used with the Goods are manufactured by or approved by the Company ; (e) the Goods are maintained in accordance with Australian Standard 1891.4 (section 9) (f) you notify any claim under this warranty to SafetyLink in writing to the address below no later than 14 days after the event or occurrence concerning the produce giving rise to the claim and you pay all costs related to your claim. This warranty does not apply to any defects or other malfunctions caused to the Goods by accident, neglect, vandalism, misuse, alteration, modification or unusual physical, environment or electrical stress. Please note that the benefits to the purchaser (as a consumer) given by this warranty are in addition to your other rights and remedies under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If any goods are not manufactured by the Company, the guarantee of the manufacturer thereof shall be accepted by the Purchaser as the only express warranty given in respect of the goods. Except as provided in this clause 11, all express and implied warranties, guarantees and conditions under statute or general law as the merchantability, description, quality, suitability or fitness of the Goods for any purpose or as to design, assembly, installation, materials or workmanship or otherwise are hereby expressly excluded (to the extent to which they may be excluded by law).
12.
FITNESS FOR PURPOSE The Purchaser agrees that it does not rely on the skill or judgment of the Company in relation to the suitability of any of the goods for a particular purpose unless it has indicated that purpose in writing to the company and the Company has acknowledged in writing that the Goods will be fit for the particular purpose.
13. 13.1
OWNERSHIP AND CONFIDENTIALITY The Purchaser acknowledges that all proprietary information in respect of the Goods and all right title and interest therein are the sole property of the Company and the Purchaser shall gain no right title or interest in the Proprietary Information whatsoever. The Purchaser specifically acknowledges the Company’s exclusive rights to ownership of any modification, translation or adaptation of the Proprietary information and any other improvement or development based thereon which is developed, supplied, installed or paid for by or on behalf of the purchaser or any customer of the Purchaser. The Purchaser acknowledges that the Proprietary, Information is confidential and contains trade secrets and that its disclosure will cause the company to suffer financial loss. The Purchaser shall implement all measures necessary to safeguard the Company’s ownership and confidentiality of the proprietary information including without limitation. (i) Allowing its employees, agents, and customers access to the Proprietary Information only to the extent necessary to ensure performance of the Goods and to require, as a condition to such access that such persons comply with the provisions of this part of these Terms of Sale. (ii) To co-operate with company in the enforcement of such compliance by the Purchasers employees, agents and customers, (iii) Not to remove any nor permit the removal of any or alteration of any copyright or confidentiality labels placed on the goods by the Company. (iv) Not to disassemble, decompile or reverse engineer any part of the Goods whether software or hardware. (v) Not to or reproduce any part of the Goods whether software or hardware.
13.2 13.3
The Purchaser indemnifies, and agrees to keep indemnified the Company against any loss, cost, expenses, damages, and harm suffered or incurred by the Company in connection with or arising out of or as a result of the breach by the Purchaser of any of the provisions of this clause.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 33 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
11. 11.1 11.2
1300 789 545
www.heightsafety.com
1300 789 545
DEFINITION For the purposes of this clause “Proprietary Information” means any and all information relating to the goods or the installation thereof including designs, drawing, instruction booklets, specifications, circuit drawings, componentry, trade marks and patents an any and all proprietary information, intellectual property and copyright in such proprietary information.
15.
SALES AND GOODS AND SERVICES TAX Should any sales tax, Goods and Services Tax as levied under the A New Tax System (Goods & Services Tax) Act 1999 (as amended) and any other tax, fee, levy or duty imposed by any competent authority he payable on any of the Goods supplied by the Company, such tax, fee, levy or duty will be to the Purchaser’s account and shall be calculated using the rates and methods of assessment in force at the time of Delivery. The Purchaser is liable of any other applicable tax, including, without limitation withholding tax.
16. 16.1
DISPUTES Any disputes between the parties arising from the performance of the provisions of these Terms of Sale must be settled through Friendly consultation by the Parties. All disputes arising in respect of these Terms of Sale which are not resolved within thirty (30) days of first arising will be finally settled under the Rules of Conciliation and Arbitration of the International Chamber of Commerce by a single arbitrator appointed in accordance with the said Rules. The place of arbitration will be the Sate from which the goods are sold by the Company (‘the Sate”). The procedural law applicable to the arbitration will be that of the State. The decision of the arbitration is final and binding upon both parties. During the period in which the dispute is being resolved, the parties must continue to perform all of the provisions of these Terms of Sale which are not under dispute and which are able to be performed by the parties.
16.2
17.
FORCE MAJEURE The Company shall not be liable for any claims of non-fulfillment or late Delivery should actual Delivery of the Goods or any parts be delayed in consequence of unforeseen events such as strikes, unforeseen breakdown of machinery (save where caused by improper maintenance or operation by untrained personnel), suspension of electricity or other relevant power supply, riots, war, robber, civil commotion, adverse non foreseeable weather conditions, disaster caused by fire and/or water, action of government or port authority, delay of vessel, rail-road embargoes, inability to obtain transportation facilities or due to a failure of an original equipment manufacturer to supply components by the due date.
18.
ENTIRE AGREEMENT These Terms of Sale contain the entire agreement between the parties hereto on the subject matter of this agreement. Any variation or modification of these Terms of Sale must be in writing.
18.1
The company reserves the right to review and amend its terms of sale from time to time. Written notification forwarded to the Purchaser by ordinary mail shall be deemed sufficient notification to bind the Purchaser to any revised or amended terms of sale for all orders place by the Purchaser and accepted by the Company after receipt of such notification.
19.
SEVERANCE If any provision of the Contract is deemed to be unlawful or unenforceable, such provision shall be severed from the Contract and all other provisions shall remain in force.
20.
NON WAIVER The failure of any party to enforce the provisions of this Contract or to exercise provisions or rights and shall not affect the enforcement of this Contract or preclude or prejudice such party from exercising the same or any other rights it may have.
21.
JURISDICTION The parties agree that this Contract shall be governed by the Laws of New South Wales and submit to the exclusive jurisdiction of the Courts of New South Wales.
NOTHING IN THESE CONDITIONS SHALL BE READ OR APPLIED SO AS TO EXCLUDE, RESTRICT OR MODIFY OR HAVE THE EFFECT OF EXCLUDING, RESTRICTING OR MODIFYING ANY CONDITION, WARRANTY, GUARANTEE, RIGHT OR REMEDY IMPLIED BY LAW (INCLUDING THE AUSTRALIAN CONSUMER LAW (CTH) AND WHICH BY LAW CANNOT BE EXCLUDED, RESTRICTED OR MODIFIED.
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 34 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
14.
www.heightsafety.com
1300 789 545
INSPECTION PROTOCOLS All personal fall protection equipment must be inspected in accordance with AS1891.4. The inspection protocol is as follows:
The operator or user conducts this inspection.
PERIODIC INSPECTION OF ALL IN-SERVICE EQUIPMENT This must be conducted by a competent person in accordance with AS1891.4. Any item that is not in use must be inspected prior to being placed back into service. Periodic inspections must be recorded on an equipment log. Inspected items may also be tagged with a colour-coded tag to reflect next inspection date. Periodic inspections are conducted at the following times: • Type I, II and III fall arrest devices - Every 3 months - external check only • Harnesses and lanyards - Every 6 months • Horizontal lifeline systems and anchorages - Every 12 months. *See Note *Note: AS 1891.4 states that fixed anchorages should be inspected every 12 months by the installer or competent person and the inspection date recorded on a fixed sign permanently mounted near to the anchor item. However, some State Regulations require that anchorage that is permanently fixed and in regular use should be inspected at intervals not greater than 6 months; and in the case of an anchorage that is permanently fixed but not in regular use, inspected before it is used. Users should familiarize themselves with individual State requirements. A Fall Protection Equipment Log is included at Appendix 3 for your use.
MAINTENANCE OF PERSONAL FALL PROTECTION EQUIPMENT The following will damage personal fall protection equipment: • Direct sunlight for extended periods (webbing products). Don't store equipment where exposure to sun can occur. The testing of harnesses simulates 10 years of UV exposure. • Acid and alkaline. Chemicals can damage the webbing. They include battery acid, solvents, petrol, caustic products, adhesives, some paints, etc. Soft products such as harnesses and lanyards should not be stored on floors, especially concrete which can cause chemical damage over time. Ropes should be stored in rope bags. • As a general rule: polyester (used in the manufacture of harnesses and lanyards) is acid resistant but susceptible to alkalines. Nylon (used in the manufacture of ropes etc,) is alkaline resistant but susceptible to acids. Always refer to the manufacturer for advice. • Heat/flame over 170 degrees. Welding splatter and grinding sparks will very quickly render a harness unserviceable. • Damp conditions, resulting in mildew of the webbing and corrosion of the buckles if not manufactured from stainless steel. Store harnesses in a ventilated cabinet or kit bag. Clean prior to inspection, harnesses and webbing products can be washed in cool water with mild detergent or purpose made cleaning products such as 'Citra Force'. Store hung up, dry and clean away from contaminants and direct sunlight.
MARKING Harnesses and webbing products: as per manufacturer's instructions. Safety labels should not be written over.
HARNESS VIDEOS Harness Features
Harness Safety Check
www.youtube.com/watch?v=zH_38p3XWv8
www.youtube.com/watch?v=PGdL7byss1k
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 35 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
BEFORE AND AFTER USE
www.heightsafety.com
1300 789 545
FALL PROTECTION EQUIPMENT LOG EXAMPLE ID No:
FALL PROTECTION EQUIPMENT LOG Date of Manufacture:
Manufacturer:
Expiry Date:
Description:
Date of inspection
Defects found at time of inspection
Recreational Catalogue – Version: 03.2017
Signature & Name of inspector
Click Back to Table of Contents
Next Inspection Due
Page 36 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Model:
www.heightsafety.com
1300 789 545
PERMANENT LADDER SYSTEM click on photos to find out more information CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
PERMANENT LADDER WITH CAGE
P E R MA N E N T L A D D E R W I T H V E R T IC A L ST A T IC L IN E & D O O R Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 37 of 40
www.heightsafety.com
1300 789 545
QR CODES
PPE CATALOGUE FLYERS PPE ONELINE SHOP
LADDER CATALOGUE LADDER FLYERS LADDER HANDBOOK
LIFELINE CATALOGUE LIFELINE FLYERS
ANCHOR CATALOGUE ANCHOR FLYERS ANCHOR HANDBOOK
LIFELINE HANDBOOK Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 38 of 40
CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
scan to find out more information or click on photos to link up with our website
www.heightsafety.com
1300 789 545
NOTES …….. CLICK ON PHOTOS TO PURCHASE VIA SAFETYLINKS ONLINE SHOP @ www.allsafetyshop.com
Recreational Catalogue – Version: 03.2017
Click Back to Table of Contents
Page 39 of 40
NEW FROGLINE LIFELINE
DISTRIBUTOR:
Page 40 of 40