Transcript
sata drive rack USER MANUAL MODEL 474344
MAN-474344-UM-0707-02
Thank you for purchasing the MANHATTAN ® SATA Drive Rack, Model 474344. This user manual tells you what need to have and do in order to easily install and enjoy the benefits of this product.
Package contents • SATA Drive Rack, Model 474344 • 3 SATA data cables and 3 power cables • 8 screws • User manual
system requirements • 3 internal SATA data connections • 3 Molex 4-pin 12 V power connections • Windows 98/Me/2000/XP/Server 2003; or MAC OS version 9.0 or above
parts Front Panel
1 2 3
1
- Power LED - Activity LED - Latches for front-panel door
2 3 Pull on the latch to unload the hard drive.
Rear Panel 1 2 3
- LED indicator for fan and HDD reading/writing (4-pin) - SATA power connections (15-pin) - SATA data connections (7-pin)
HDD 1 HDD 1
1
HDD 2 HDD 3 HDD 2
HDD 3
2
3
installation 1
3
1. Remove the covers 2 from two available adjacent drive bays. 2. Insert the drive rack; align the screw holes. 3. Secure the rack with the screws (below left). 4. Connect the SATA power cable to the back of the HDD (15P) and the PC power cable (4P); connect the SATA data cable 4 to the back of the HDD (7P) and the motherboard SATA port (7P); connect the small access SATA data cable to the back of the HDD (4P – 4P; e.g., HDD1 – HDD1).
inserting the hard drive 1
3
1. Pull the latch to open the front 2 door. 2. Insert the hard drive in the drive rack, label (printed) side up. CAUTION: The front panel door will not close firmly if the hard drive is inserted backwards. Damage can occur if the door is forced closed. 3. Press the ADDITIONAL CAUTIONS: door shut (pushing 1. Install the SATA port startup software prior the hard to using the device. disk drive 2. If the inserted hard drive has application into the software, always switch the computer off drive rack) before inserting/ejecting the hard drive. until it locks 3. The hard drive is a precision device: Handle in place. with care. Read the manual prior use.
removing the hard drive 1
3
1. Open the door of the 2 drive rack. CAUTION: Do not eject the hard drive while it is running, as damage to the drive or data loss could result. 2. Remove the hard drive from the drive rack, being careful that the bottom of the hard drive does not touch the metal housing inside the SATA drive rack. CAUTION: The hard drive can heat up to as much as 50˚C (122˚F); though not hot enough to burn, the hard drive should still be held only on its edges. Avoid contact with the printed circuit board. 3. Close the front panel door. ADDITIONAL CAUTIONS: 1. Don’t place foreign objects inside the drive rack. 2. Always keep the front panel door closed to prevent damage and dust accumulation.
Specifications General • Supports data transfer speeds up to 3 Gbps • Drive rack connector tested for up to 10,000 insertion/ejection cycles • 2 40 x 40 mm cooling fans • LED power and activity indicators (each drive) • 194 x 146 x 85 mm (7.6 x 5.75 x 3.4 in.); 1.05 kg (37 oz.) Internal Connections • 3 SATA power, 15-pin • 3 SATA L-type data, 7-pin External Connections • 3 SATA power, 15-pin • 3 SATA L-type data, 7-pin • 3 HDD LEDs & fans, 4-pin
MANHATTAN offers a complete line of PC Components, Peripherals, Cables and Accessories. Ask your local computer dealer for more information or visit us online at www.manhattan-products.com ®
Copyright © MANHATTAN All products mentioned are trademarks or registered trademarks of their respective owners.
