Transcript
SATA to Compact Flash SSD Adapter StarTech ID: SAT2CF
This SATA to CF SSD adapter features a SATA male power connector and a SATA male data connector, as well as a Compact Flash port, allowing you to connect a Compact Flash type media card to a laptop computer in place of a serial ATA hard drive. A Do-it-yourself SSD solution, the CF to SATA adapter allows Compact Flash, Compact Flash 2, or MicroDrive media to be used on a notebook computer as a bootable hard drive and requires no software or driver installation. Applications
Convert a CF card into a bootable SATA solid state drive (SSD) for reduced power consumption, greater reliability and reduced heat generation Add cost-effective solid state storage to a small form factor or embedded computing solution Create a compact SSD for use in volatile environments such as handheld, mobile, or industrial environments Features
Compatible with Compact Flash I/II, MicroDrive™ Small, compact form factor No driver of software installation required
www.startech.com 1 800 265 1844
Technical Specifications
Warranty 2 Years External Ports 1 - CompactFlash (50 pin) Slot External Ports 1 - SATA (7 pin; Data) Plug External Ports 1 - SATA Power (15 pin) Plug Memory Media Type CF (Compact Flash I/II Card) Memory Media Type IBM Micro Drive MTBF 3,864,231 Hours OS Compatibility OS independent; No software or drivers required Note Hot swapping not supported Product Length 2.9 in [74 mm] Product Width 2 in [51 mm] Product Height 0.2 in [6 mm] Product Weight 0.7 oz [20 g] Operating Temperature 5°C to 50°C (41°F to 122°F) Storage Temperature -25°C to 70°C (-13°F to 158°F) Humidity 20% to 80% RH Shipping (Package) Weight 0.3 lb [0.1 kg] Included in Package 1 - SATA to Compact Flash Adapter Included in Package 1 - Instruction Manual Certifications, Reports and Compatibility
www.startech.com 1 800 265 1844
