Preview only show first 10 pages with watermark. For full document please download

Sata18powrau This 18in `upward` Right Angle Sata Cable Features

   EMBED

Share

Transcript

18in Upward Right Angle SATA Cable with LP4 Adapter StarTech ID: SATA18POWRAU This 18in 'upward' right angle SATA cable features an upward right-angled (90°) combination SATA data and power connector, that breaks out into one LP4 power (male) connector and one SATA female data connector - allowing you to connect a Serial ATA drive to a power supply that may not offer a SATA power connector, as well as to the motherboard SATA controller. The data segment of the cable uses the 7-pin SATA architecture to keep the cable ultra-thin, narrow and flexible, giving you more room and better airflow inside your case. The keyed contacts of the Serial ATA connector prevent broken or bent pins and allow a firmly seated connection with minimal pressure. Designed and constructed to provide a dependable and convenient SATA connection, the right angled Serial ATA Data Cable is backed by StarTech.com's Lifetime Warranty. Applications ATA Drive Arrays Compatible with all Serial ATA Hard Drives For use in servers and storage subsystems Mini tower computers Features Designed to meet/exceed SATA standards Molded 9010/30/2012eg; connector Supports data transfers of up to 6 Gbps Compliant with Serial ATA III Specifications intrl.startech.com Technical Specifications Warranty Lifetime Cable Jacket Type PVC - Polyvinyl Chloride Connector A 1 - LP4 (4 pin; Molex Large Drive Power) Male Connector A 1 - SATA (7 pin; Data) Receptacle Connector B 1 - SATA Data & Power Combo (7+15 pin) Receptacle Type and Rate SATA III (6 Gbps) Color Red Connector Style Right Angled Cable Length 18 in [457.2 mm] Shipping (Package) Weight 0.1 lb [0 kg] Included in Package 1 - Right upward angled SATA Cable with LP4 adapter Certifications, Reports and Compatibility intrl.startech.com