Transcript
Datasheet
SATADOM-ML 3ME series -
SATA 6Gb/s interface iSMART disk health monitoring Intelligent error recovery system Excellent data transfer speed Write protection security Zero mechanical interference Anti-vibration mechanical design
Introduction Innodisk SATADOM-ML 3ME is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier. Innodisk SATADOM-ML 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
www.innodisk.com
SATADOM-ML 3ME series Diagram
Contact us for more information about the SATADOM-ML 3ME. Innodisk is a service-driven provider of industrial embedded flash storage and Dram products and technologies, with a focus on the cloud computing, industrial/embedded, and aerospace and defense industries.
Specifications Interface Flash Type Capacity Max. Channels Sequential R/W (MB/sec, max.) Headquarters (Taiwan)
Max. Power Consumption Thermal Sensor
5F., No. 237, Sec. 1, Datong Rd., Xizhi Dist., New Taipei City, Taiwan (R.O.C.) Tel: +886-2-7703-3000 Email:
[email protected]
Extended DRAM buffer
Branch Offices:
MLC 16GB~128GB 2 460/160 2A (5V x 400mA ) ST- Optional/ WT- Default -
H/W Write Protect
√
ATA Security
√
S.M.A.R.T.
√
Dimension (WxLxH)
USA
[email protected] +1-510-770-9421 Europe
[email protected] +31-(0)40-282-1818 Japan
[email protected] +81-45-594-7581 China
[email protected] +86-755-21673689 www.innodisk.com
SATA III
35.5 X 30.0 X 10.8 mm Vibration: 20G @7~2000Hz
Environment
Shock: 1500G @ 0.5ms Storage Temperature: -55°C ~ +95°C MTBF: 3 million hours
© 2012 Innodisk Corporation. All right reserved. Specifications are subject to change without prior notice.
Operation Temp.
16GB
32GB
64GB
128GB
20150108
Standard Grade
DESML16GD06RC1DC(F)
DESML32GD06RC1DC(F)
DESML64GD06RC1QC(F)
DESMLA28D06RCAQC(F)
DESML16GD06SW1DC(F)
DESML32GD06SW1DC(F)
DESML64GD06SW1QC(F)
DESMLA28D06SWAQC(F)
Ordering Information
(0°C ~ +70°C) Industrial Grade (-40°C ~ +85°C)
PN end with F is SATADOM Pin 7 with power supply version, which doesn’t provide power cable.
www.innodisk.com
