Sbp200 — 4 Point All Purpose Knob Hardware W

Transcript

SBP200 TECHNICAL DATA The SBP200 Includes: 1. Solid Back (Must specify all dimensions upon ordering.) 2. All Purpose Knob Hardware x4 (2 Left, 2 right) — 4 Point All Purpose Knob Hardware w/ Solid Back 1. 5/32 tool for 1/4– 20 button head screws (mounting hardware). 2. 3/16 tool for 1/4—20 socket head screws (adjustments). SELLING POINTS 1.Solid Back 1. Removable knob hardware makes it quick and easy to remove back. 2. Smooth finished edging on every piece. 3. Fully adjustable to accommodate the needs of almost any client. STANDARD CONFIGURATION DIMENSIONS Cane clamp is designed to fit 1 inch, 7/8” inch or 3/4 inch canes. Use these standard dimensions to determine which configuration you will need. See back for back modifications. (Must specify upon ordering) 2.25” Mounting hardware is also available in a single slot double hook style bracket. Specify upon ordering. 2.All Purpose Knob Hardware 4.125” SBP200 Solid Back with 4 Point All Purpose Adjustable Clamps; Double Slot, Single Hook L Bracket(E2617) The SBP200 is a 1/2 inch wood solid back with All Purpose Adjustable Knob Hardware and Double Slot, Single Hook “L” Brackets. The hardware is fully adjustable to mount to almost any chair size. The solid back can be fully modified to accommodate the needs of almost any client. The cane clamps can be attached to 1”, 7/8”, or 3/4” canes (specify cane size) 1” Mounting hardware has 4 inches of fore/aft adjustability to cane mount to almost any chair. SP-Dashboard • 1 SBP200 Modifications Structural Back Modifications Back Cover Modifications Foam Modifications BMD218 — Elastic Slip on Cover BMD200 — 1/2” Pudgee Foam BMD219 — Velcro Cap Cover BMD201 — 1” Pudgee Foam BMD229 — Standard Cover for Back BMD204 — 1/2” Cubed Gel (Zipper Cover) BMD259 — Cover for Sling Back BMD205 — 1/2” Extra Soft Sunmate BMD282 — Back of Back Cover (BOB) BMD236 BMD223 BMD220 Scapular Cutout Biangular Back “I” Style Back BMD221 “T” Style Back BMD206 — 1” Extra Soft Sunmate BMD258 — Embroidery Design for Back BMD207 — 1/2” Soft Sunmate BMD208 — Half Round Lumbar Roll Custom Dimensions BMD214 — Aluminum Base for Back BMD217 — Biangular 2 Piece for Back BMD209 — 1” Soft Sunmate All dimensions for solid back and modifications must be specified upon ordering BMD211 — 1” Medium Sunmate BMD220 — “I” Style Back BMD221 — “T” Style Back BMD223 — Biangular 1 Piece for Back BMD210 — 1/2” Medium Sunmate Scapular Cutout Back Mod Height BMD212 — 1/2” Firm Sunmate BMD213 — 1” Firm Sunmate BMD224 — Curved Wood for Back BMD215 — Grid Cut 2x2x3 BMD235 — Curved Foam for Planar Back BMD216 — Grid Cut 2x2x4 BMD236 — Scapular Cutout BMD222 — Grid Cut 2x2x2 BMD237 — FIPS Package with Cover BMD243 — 1/2” Flat Gel BMD239 — 1 Unit FIPS Soft Sunmate Bowl Pack “I” Back Mod BMD240 — 1/2 Unit FIPS Soft Sunmate Bowl Pack BMD241 — Fixed Lumbar Support BMD287 — 1/2” HR1 BMD288 — 1” HR1 “T” Back Mod BMD242 — 6” Adjustable Lumbar Support BMD289 — 1/2” HR2 BMD244 — 1/4” Wood for Back BMD290 — 1” HR2 BMD256 — Rear Upright Foam Overlay for Back BMD257 — 10” Adjustable Lumbar Support BMD281 — 1/2” Closed Cell BMD291 — 1/2” HR3 Width Solid Back BMD292 — 1” HR3 SP-Dashboard • 2