Transcript
SPECIFICATIONS SBX220 FEATURES • Highly compact companion subwoofer for all JFX products • Unique baffle design and advanced transducers maximize LF “punch” • Low frequency response to 32 Hz • Reinforced cup for pole mounting JFX loudspeakers • Foot recesses for stable ground stacking in multiples
DESCRIPTION The SBX220 is a compact, high-powered subwoofer with an enclosure styled to complement JFX Series loudspeakers. It contains two advanced 12 inch woofers mounted in a “clam shell” driver arrangement, which provides tight driver coupling to increase output. A massive port radiates the considerable energy needed at the enclosure's tuning frequency to complement the JFX Series' high output.
PHYSICAL
The enclosure includes balance-optimized recessed handles and rubber feet. A reinforced pole-mount receptacle allows the SBX220 to double as a base for use with any JFX full range system. The grille is internally braced to withstand the rigors of portable use. The input connector for the SBX220 is a Neutrik NL4 using pins 2+/-. The input is looped through to a second NL4 for connection to additional SBX220s. Pins 1+/can be used for connection and loop through of the signals for a companion full-range loudspeaker. This means a single loudspeaker cable to the SBX220 can power both the subwoofer and full-range loudspeakers.
System Configuration LF Subsystem Enclosure Materials Finish Connectors Hardware
Grille Dimensions
APPLICATION The SBX220 is intended primarily for portable applications, but it may readily be used in installations where space is restricted. At only 18 inches high, it is very effective in houses of worship, clubs, and theatres where subwoofers must be installed under a low stage.
PERFORMANCE
Height Width Depth Weights Net Weight Shipping Weight Companion Systems
Dedicated subwoofer 2x 12 in cones, vented Exterior grade Baltic birch plywood Wear-resistant textured black paint 2x Neutrik NL4 Speakon Pole mount cup for 1-3/8 in diameter pole (4 ft length recommended) Powder coated perforated steel, foam backed inches millimeters 18.0 457 25.5 648 30.0 762 pounds kilograms 105 47.7 119 54.1 Any JFX full range loudspeaker
Frequency Response (1 W @ 1 m) ±3 dB 38 Hz to 300 Hz -10 dB 32 Hz Axial Sensitivity (dB SPL, 1 W @ 1 m) Sub Bass 98 Impedance (Ohms) Sub Bass 4 Power Handling (Watts, continuous) Sub Bass 1400 Recommended High-Pass Frequency 24dB/Octave 30 Hz Calculated Maximum Output (dB SPL) Sub Bass Peak 135 Sub Bass Long Term 129
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251 SBX220/0006389/001/2 pp
[email protected] February 2003
www.eaw.com Printed in USA
SPECIFICATIONS SBX220 DIMENSIONAL DRAWING 2.00
INPUT PANEL
21.50 C L 12.36
WHITINSVILLE, MA USA 22.10
SBX220
S/N
TOP HAT 30.00
NEUTRIK
26.24 4X HANDLE
TOP
12.78 6.71
25.50
18.42 18.00
C L
C L 4X 6.50
INPUT
C L
6.63
9.75 GRILLE PARTIALLY SHOWN
4X 4.50
FRONT C L
DIMENSIONS APPLY TO BOTH SIDES
NL 4 MPR
3.63
BACK
PIN 2--...LF-PIN 2+...LF+ NEUTRIK
NOTES: 1. SYMBOL INDICATES FOOT CUP. 2. SYMBOL INDICATES RUBBER FOOT. 3. SYMBOL INDICATES CENTER OF BALANCE. 4. WEIGHT APPROX. 105 LBS. 5. SHIPPING WEIGHT APPROX. 119 LBS. 6. HEIGHT OF FEET APPROX. .4"
22.10
0006237 (A) 2/12/03
21.50 2.00
BOTTOM
NL 4 MPR
Manufacturing tolerances are +/- 0.13 and +/- 1°
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 EAW products are continually improved. All specifications are therefore subject to change without notice.
FAX 508 234 8251 SBX220/0006389/001/2 pp
[email protected] February 2003
www.eaw.com Printed in USA
