Transcript
RS-232 To RS-422/485
SC-101-I
Ethernet To RS-232/422/485 Features
Easy Installation
Industrial － 3000V DC Isolation Protection
RS-232 Signal Optical Isolation Protection
All RS-422 / 485 Signals provide surge protection
Auto select RS-422 or RS-485
Support Screw Terminal & Standard External DC Power Adapter
Wide Range Power Input Voltage DC 9 ~ 24 V
Specification
Serial Port
Power
Port：RS-232 * 1 port
Standard DC adapter DC 9V
Port：RS-422 / 485 * 1 port
Power consumption：< 2W
Speed：300 bps ~ 115.2 K bps Parity / Data bit / Stop bit auto detect RS-232 Pins：Tx, Rx, GND, ( RTS & CTS shorted ) , ( DTR & DSR shorted ) RS-422：Tx+, Tx- , Rx+, Rx- ( Surge Protect ) RS-485：D+, D- ( Surge Protect )
Input Power：DC +9V ~ 24VDC / 150mA Over Current & Reverse Protection
LED Indicators SYS , TX , Rx
Environment Operating Temperature：0 ~ +70℃
Built in Terminal 100 Ohm, Terminal resistor SW select ON / OFF
Storage Temperature：-10 ~ +80℃
15KV ESD for all signals
Humidity：5 ~ 95% non-condensing
Host connection：Standard DB-9 pin female connector Distance：Up to 4000ft ( 1250 M )
Dimensions 88 * 91 * 27 mm ( W * D * H )
Connection type：Screw terminal for maximum AWG 12 wire
Weight 84 g
Regulatory Approvals CE / FCC RoHS
Warranty 1 year
KSH INTERNATIONAL CO., LTD. 2F., No.17, Minsheng Rd., Xindian Dist., New Taipei City 23150, Taiwan TEL: +886-2-2218-2252 ‧ FAX: +886-2-2218-3531 Website：www.tcpipweb.com.tw ‧ E-mail：
[email protected]
Page 1 of 1
