Transcript
www.hertzaudiovideo.com
HDP 4
1000 w MAX
D CLASS FULL RANGE FOUR CHANNEL
Power Supply Power supply voltage:
11÷15 VDC
Idling current:
1,5 A
Idling current when off:
0.04 mA
Consumption @ 2Ω, 14.4 VDC (Max Musical Power):
50 A
1
Thermally optimized double extruded heatsink, ergonomic and aluminium die-cast end caps;
2 3
4 LEDs monitor the status of the amplifier and communicate with the user; Special balanced input circuitry to reject electromagnetic disturbances present on the Pre-amplified or Speaker level inputs; HDP Input featuring either Speaker In (OEM radio) and RCA In (Aftermarket radio) inputs; ART™, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (available on Speaker In only); Full range Pre-out, also available when using Speaker Level In inputs; 12 dB/Oct. continuously adjustable (50 to 5k Hz and 80 to 3.3k Hz) active crossover with Lo-Pass/Hi-Pass or Full Range settings; A/B Input switch eliminates the need for RCA Y-Adapters; Power supply stage featuring multiple winding transformer, Low-ESR 105°C capacitors, D-Class 2 Ω stable output stage based on solid T220-5pin power Mosfets.
Amplifier stage 4 Distorsion - THD (100 Hz @ 4Ω):
0.08 %
Bandwidth (-3 dB):
5 ÷ 55k Hz
S/N Ratio (A weighted @ 1 V):
100 dB
Damping factor (100 Hz @ 4Ω): Pre-In sensitivity:
50 15 kΩ 1.4 ÷ 24 V RMS
Speaker-In impedance: Load impedance: 4 Ch 3 Ch 2 Ch
6 7
0.3 ÷ 5 V RMS
Pre-In impedance: Speaker-In sensitivity:
5
470 Ω 2Ω 2 x 2Ω ÷ 1 x 4Ω 4Ω
8 9
Filter config.
A channels
B input
A input
A 80-3.3k Hz
CEA 2006-A RATINGS RMS Power (4 Ω, ≤ 1 % 120 W x 4Ch THD+N, 14.4 V): S/N Ratio (ref. 1 W output):
Signals Inputs and Selector
Speakers Output B channels
50-5k Hz
Lo-pass
Lo-pass
80-3.3k Hz
50-5k Hz
INPUT B A
INPUT B A
80 dBA
INPUT B
Inputs / Filters Inputs: Outputs:
Pre IN / Speakers IN Pre OUT
A Ch Filters: Full/Hi-Pass/Lo-Pass 50 ÷ 5k Hz (2 range) @ 12 dB/Oct.
Other functions Remote In: Remote Out:
B Ch Filters: Full/Hi-Pass/Lo-Pass 6 ÷ 15 VDC - 1 mA 12 VDC - 15 mA
80 ÷ 3.3k Hz @ 12 dB/Oct.
Size / Weight
ART : Automatic Remote Turn-On/Off with Speaker-In
Maz size (mm/inches): 171 x 284 x 46.70 / 6.73” x 11.18” x 1.83”
Fuse:
Weight (kg/lb):
TM
2 x 40 A
2.45 / 5.4
- 62018 Potenza Picena (MC) Italy - T +39 0733 870870 - F+39 0733 870880 - www.elettromedia.it
All Specifications Subject to Change Without Notice 16/05/2011
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 4 Ch 150 W x 4 (4Ω) 4 Ch 250 W x 4 (2Ω) 3 Ch 150 W x 2 (4Ω) + 500 W x 1 (4Ω) 3 Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω) 2 Ch 500 W x 2 (4Ω)
www.hertzaudiovideo.com
ES 250
500 Watt
Technical Specifications Subwoofer 500 250
Impedance
Ohm
4
Frequency response
Hz
28 - 300
Sensitivity
dB/SPL
89
Outer diameter
mm
264
Mounting hole diameter
mm
234
Magnet size
mm
120
Total depth
mm
136
Mounting depth
mm
119
Total driver displacement
lit
1,2
Weight of one component
Kg
3,980
Voice coil diameter
mm
50
Magnet Cone Xmech*
Double magnet, High density flux ferrite Water repellent, pressed paper cone mm
14,5
Electro-Acoustic Parameters D mm Xmax mm Re Ohm Fs Hz Le mH@1kHz Le mH@10kHz Vas lit Mms gr Cms mm/N BL T-m Qts Qes Qms Spl (1m/2,83V) dB
212 9 2,9 27 2,85 1,09 54,00 112,0 0,31 9,70 0,54 0,58 7,50 89
Xmech* maximum mechanic excursion: it indicates the motion range in the speaker linear functioning area, in both ways.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
High thermal dissipation and magnetic permeability plates, providing constant, even flux. Large double magnet, for perfect control under high power, high excursion conditions. Copper voice coil, wound on aluminium former, for startling thermal and mechanical capacity. Back plate vent holes, for very good thermal dissipation. Back Vented Spider support, for perfect symmetry under high excursion and thermal dissipation. Butyl rubber gasket provides ideal coupling to the mounting surface, damping basket resonance. Butyl rubber magnet ring provides protection against abrasions. Internally reinforced basket, protected from abrasions by high resistance paint. High current, tin-plated terminals. Silver plated silicone shielded lead wires for maximum reliability and conductivity. Basket and motor coupled and damped through special epoxy glue. Wide-wave, resin-bonded fibre spider for mechanical reliability and consistent parameters. High density Foam surround, for linear movement even under high excursion conditions. Water-repellent pressed paper cone.
1000
100
50
10
1
- 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
19/09/2007
peak continuous program
264
250 (10”)
234
Power Handling (Watt)
mm
136
Size
119
Component:
www.hertzaudiovideo.com
desiGn
ES 250
The speaker overall volume must be taken into account when designing a box: if the driver is mounted with its magnet facing the box inner part, add the volume indicated in the Technical Specifications (Total driver displacement) to total volume calculation. The volumes of Reflex projects include tubes and ports overall dimensions.
Sealed Box - Dimension
Sealed Box Vcc = Fc =
The box is deliberately small in order to optimize the overall bulk at most; this is the right solution for those who have a narrow space but nevertheless do not renounce a powerful bass.
17 52
Lit Hz
Damping material: FONOFORM on all the inside walls except for the speaker’s
Sealed Box - Performance
Sealed Box Vcc = Fc =
Bigger, both in dimensions and sound, it responds with a full bodily bass and excellent dynamics.
22,7 Lit 47 Hz
Damping material: FONOFORM on all the inside walls except for the speaker’s
Reflex Box - Dimension
Damping material: FONOFORM on all the inside walls except for the speaker’s
Almost the same dimensions as the Sealed Box Performance, yet offering a wider extension, with a strong sound and an excellent articulation.
Reflex Box - Performance
Damping material: FONOFORM on all the inside walls except for the speaker’s
Great power handling, high sensitivity values and great impact; this is the biggest sub for a powerful bass with every kind of music.
Reflex Box Vb = 20 Lit Fb = 40 Hz Reflex Tube
Ø = AR 65V L = 105 mm
Reflex Box Vb = 28 Lit Fb = 35 Hz Reflex Tube
Ø = AR 65V L = 155 mm
- 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
www.hertzaudiovideo.com
250
HSK 165
Watt
Technical Specifications 2 way system
Power Handling
W peak W continuous
250 125
Impedance
Ω
4
Frequency response
Hz
50 ÷ 22k
Sensitivity
dB/SPL
92
Crossover included
LO/HI-pass
3.2 kHz @ 12/12 dB OCT.
Component adjustment
Tweeter
-2; 0; +2
Outer Ø mm
Woofer Tweeter
167 44
Mounting Ø mm
Woofer Tweeter
146 41
Total depth mm
Woofer Tweeter
79 26
Mount. depth mm
Woofer Tweeter
69 15
Magnet size mm
Woofer Tweeter
85 24,5
Weight of one component kg
Woofer Tweeter
1,13 0,06
Voice coil Ø mm
Woofer Tweeter
30 25
HV 165 Electro-Acoustic Parameters D mm Xmax mm Re Ω Fs Hz Le mH@1kHz Le mH@10kHz Vas l Mms g Cms mm/N BL T-m Qts Qes Qms Spl (1m/2,83V) dB
130 3 3,0 70 0,40 0,23 8,00 13,5 0,32 6,00 0,60 0,65 10,00 92
Tweeter: 1 Tetolon® soft dome tweeter. 2 25mm ø, ferrofluid-cooled mobile voice coil. 3 High energy Neodymium magnet. 4 Rear acoustic chamber. 5 Revolving support and accessories for factory location and flush mounting. 6 Very flexible, high current input cable. Woofer: 1 Soft iron plates for high heat dissipation, part of the symmetrical magnetic flux motor. 2 Over-sized magnet; provides outstanding energy for maximum control. 3 Pure copper voice coil wound on a KSV former; for excellent thermal and mechanical capability. 4 Vented bottom plate; improves linearity and thermal dissipation. 5 Damped Mesh Fibre Cone; for extended bandwidth and smooth response. 6 V-cone®; for the best off-axis dispersion and mid-high frequency detail. 7 Anti-vibration rubber magnet cover; damps spurious vibrations. 8 Aerodynamic die-cast aluminium basket; eliminating rear wave reflections. 9 Radial Venting System; for efficient thermal management. 10 Loss-less Polymer Rubber Surround; for long throw and maximum damping. 11 Grille included.
146 mm 167 mm
41 mm 44 mm
114 mm
- 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
10/04/2009
165 (6”1/2) 25 (1”)
22 mm
HV 165 woofer HT 25 tweeter
79 mm 69 mm
Size mm
26 mm 15 mm
Component
