Transcript
SCHEDA TECNICA
PINGUINO WASH
From 2 to 4 washing bays Technology housing : Inside 1 or 2 stainless steel technical cabinets to be inserted between each bay In technical room with fireproof precompressed panels and insulated, 50mm thickness On Skid stainless steel structure for inserting inside existing technical room Till 7 washing programs: Pre-wash, brush, rinse, spot-free spot (standard programs) Rim washing, chemical pre-wash, pre wax, Rain-x (optionals) Water treatment system assembled sembled inside cabinet or technical room or on skid structure composed by: volumetric regeneration duplex water-softener for the production of soft water, osmosis system for the production of osmotic water. Soft water directly supplied without storing Osmosis water storing in tank inserted into cabinet or technical room or on skid structure with capacity of 140L, for 2/3 bays, and of 300L, for 4 bays installations. Osmotic water pressurization through centrifuge pump controlled by PLC Hot water producer: for the sole brush system through hrough electric boiler For brush and pre-wash wash through heater with possibility of Methane/GPL gas, diesel, electric supplying For every bay, high pressure group oup with 1 speed engine and INTERPUMP pump (for cold pre-wash) wash) or CAT (for hot pre-wash) pre of 12L/m 110 bar; speed controlled through inverter, mounted on bumpers Pre-wash wash shampoo through electronic dosing pump for every bay Brush shampoo through single proportional electronic dosing pump Rim wash through single proportional pneumatic pump Chemical pre-wash wash through single proportional pneumatic pump Wax program through single proportional electronic dosing pump Rain-X X program through single proportional electronic dosing pump Anti-freeze circuit for lance and brush Anti-freeze closed circuit recirculation system and safety s system for the anti-freeze reeze functionality in case of electricity absence Foam effect for brush through venturi system PLC electrical panel and possibility ossibility of touch screen manual operator board insertion Pushbutton : payment services activation with different prices management, credit introduction through electronic token machine and loyal payments systems through keys or chip card rd th Pushbuttons fixing: n.2 built-in in on part of the technical room for potential 3 or 4 floor bay with stainless steel support, and with SKID technology all with stainless steel support Pushbutton Anti-freeze and anti-condensate condensate system Bay fitting completed with: lances and brushes for chemical products supplying with stainless steel bins for lances and brushes, connection hoses and turning arms Bays structure wholly made in hot-dip dip galvanized steel with possibility of epoxy or powder painting Covered structure outfitting with ABS plastic or Aluminium fairings Washing Heights Washing Heights Washing Heights Bays width : 5000mm technology in technical cabinet, 4500mm or 5000mm technology in technical room Bays lighting through neon or led overhead lights
