Transcript
SCM Flash Card ATA smart voltage The Flash ATA Card is a flash technology based, ATA interface, Type I,II PC Card using NANDflash memory devices. The PC card operates form a single 3.3/5-Volt power supply. Emulating IDE hard disk drives and being fully compatible with PC Card ATA standard, it is a perfect choice of solid-state mass-storage cards for Palmtop, Notebook PC, PDA, PCA. The Flash ATA Card is a low-power design with Flash technologies ruggedness, reliability, performance, and convenience. It has no seek errors, and its solid state construction requires no preventive maintenance. SCM´s Flash ATA Card is about 3 times faster than leading Flash ATA Card Vendor in terms of write performance and data transfer rate, while at the same time consumes less than half of the power. PC Card compliant - Fully compatible with PC Card standard and PC Card ATA - Backward compatible with PCMCIA 2.1 - Support for CIS implemented with attribute memory - Compatible with all PC Card Services and Socket Services ATA/IDA Interface - ATA command set compatible - Support for 8- or 16 bit host data transfers - Programmable and auto-wait-state generation For compatibility with any host speed using IORDY - Compatible with host ATA disk I/O BIOS, DOS/Windows file system, utilities, and application software Extremely rugged and reliable - Solid-state reliability - 1000-G operating and non-operating shock. 15-G vibration
SCM PC-Card GmbH Sperl-Ring 4 – Hettenshausen D-85276 Pfaffenhofen/Ilm
- 3.000.000 power-on hours MTBF - Built-in 32-bit „on-the-fly“ ECC High performance - Fast ATA host-to-buffer burst transfer rates up to 20 Mbytes/second - Supports PIO mode 4 and UDMA mode 4, both at 16,6 Mbytes/second - Buffer transfer rates to and from flash memory up to 8 Mbytes/second - Support background erase operation - Card capacity from 8 up to 1024 Mbytes available - Single 3.3/5 Volt power supply. Very long power consumption with automatic power Management. - Zero-power data retention, no batteries required Technical specifications Dimensions: - Type II card: 85,6mm (L) 54mm (W) 5,0mm (H) - Weight: 50 g Storage Capacities: - 32MB, 64MB, 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, 8GB (unformatted) System Compatibility - PCMCIA/Card Bus Slot (Notebook), PCMCIA/Card Bus Adapter, PCMCIA to ExpressCard/34 Adapter Performance: - Data Transfer Rates - to/from Flash memory: 8 Mbytes / sec - to/from host: 20 Mbytes / sec - Command to DREQ: 200usec (max.) - Sleep to Read: 100usec (max.) - Sleep to Write: 100usec (max.) - Dual-port data buffer 4 Kbytes SRAM Reliability - MTBF: 3.000.000 power-on hours - Error Rate: 1 in 1014 bits read - ECC: 32-bit polynominal supporting two random, single-bit “on-the-fly” corrections
Tel.: +49 84 41 788-810 Fax: +49 84 41 788-900 Internet: http://www.scm-pc-card.de
Subject to change without notice
Ruggedness - Shock, operating or non-operating 1000-G, any axis or direction Vibration, operating or non-operating 15-G 10 - 500 Hz Operating Voltage: 3.3/5V + 10% Power consumption: - Power-saving read: 20 mA (max.) - Power-saving write: 25 mA (max.) - High-performance read: 65 mA (max.) - High-performance write: 80 mA (max.) - Sleep mode: 0,6 mA Environment conditions: - Operating temperature 0°c to 70°c - on request ext. temperature -20°c to 85°c - Storage temperature -20°c to 85°c - Relative humidity 5% to 96% - Altitude 50.000 ft
SCM PC-Card GmbH Sperl-Ring 4 – Hettenshausen D-85276 Pfaffenhofen/Ilm
Tel.: +49 84 41 788-810 Fax: +49 84 41 788-900 Internet: http://www.scm-pc-card.de
Subject to change without notice
