Scorpion Recording System

Transcript

Scorpion recording system CENTRAL SYSTEM HARDWARE CRS FEATURES & SPECIFICATIONS CRS (Central Recording System) x x x Shock protected for off-road vehicle or heli-portable operations Two ruggedized PCs are mounted in the enclosure Graphical User Interface (GUI)      x 64-bit multi-processor PC Runs all Windows®-based applications RAID level 5 disk storage Multi-monitor video support Microsoft® Windows® Server 2003 Real-Time Engine (RTE)        64-bit multi-processor PC TIM Field Electronics Interface (FEI) Seismic Data Processor (SDP) TIP Maximum output record length 64 sec @ 2 ms RAID level 5 disk storage Gigabit Ethernet ports Input voltage: 110-240 VAC, 50/60Hz Power consumption < 1000W with standard equipment Operatingg temperature: mp TIM (Truck Interface Module) x Truck Network Switch x x Advanced network packet telemetry x x x Provides master clock and source timing Provides connectivity between CRS and TIP (Truck Interface Panel) Source controller hardware interface (12 volt power supplied) Six integrated Delta Sigma analog auxiliary channels Storage ag temperature: mp - Input voltage: 110-240 VAC, 50/60Hz Humidity: 20% - 80% non-condensing Power consumption < 220W with Source Controller Total CRS Dimensions: 73cm x 53.3cm x 49cm Operating g temperature: mp Total CRS Weight: 71.4 kg (157.0 lb) (without tape drive module) Storage ag temperature: mp Humidity: 20% - 80% non-condensing Total TIM Dimensions: 15.3cm x 394cm x 41.9cm Total TIM Weight: 12.3 kg (27.0 lb) © 2010 INOVA Geophysical Equipment Ltd. All rights reserved. Information subject to change without notice. Revised May, 2010. 1018-040016H Corporate Headquarters 12200 Parc Crest Drive Stafford, TX 77477 p +1.281.552.3800 f +1.281.552.3811 inovageo.com CENTRAL SYSTEM HARDWARE TIP (Truck Input Panel) x Provides physical interface between the TIM and the XLUs x Includes four cross line ports x Support up to 120 active lines Dimensions: 4cm x 38.8cm x 38.8cm Weight: 4.3 kg (9.5 lb) Tape Drive Options x Scorpion Internal Tape Drive, P/N 0017-000012  Includes dual LTO-2 drives x SCSI LVD Kit, P/N 0017-000013  Supports external dual; LTO-2, LTO-3, 3580 x SCSI HVD Kit, P/N 0017-000014  Supports external dual; 3490, 3590 x Fiber Channel Kit, P/N 0017-000015  Supports external dual 3592 (P/N 0014-040027) Monitors (3 standard with system) x x Dimensions: 44.4cm x 19.3cm x 63.5cm Weight: 5.22 kg (11.5 lb) Printer x Standard: HP DeskJetTM series Dimensions: 57.4cm x 40.9cm x 18.6cm Weight: 6.44 kg (14.2 lbs) Plotter x ISYS V12 with Ethernet Interface Dimensions: 43.2cm x 31.8cm 15.2cm Weight: 11.34 kg (25.0 lb) © 2010 INOVA Geophysical Equipment Ltd. All rights reserved. Information subject to change without notice. Revised May, 2010. 1018-040016H