Transcript
SCORPIO™ DIRECT VENT GAS FIREPLACES ARTISANALLY CRAFTED LOG SETS NOW OFFERED IN: CHARRED OAK OR DRIFTWOOD
Traditional
Fireplace Design Collection
FEATURED Scorpio shown with Old Town Red Herringbone Ceramic Fiber Liners, Charred Oak Logs and interior illumination
SCORPIO The superbly designed Scorpio Series Direct Vent Gas Fireplaces are the embodiment of traditional style and performance. Dressed with an array of standard features, such as ceramic glass, factory-installed blower, full-function remote control, interior illumination, and your choice of either Driftwood or Charred Oak high-definition logs, these fireplaces are the perfect centerpiece for any room. Tradition. Style. Performance. That’s the essence of the Astria Scorpio Series Direct Vent Gas Fireplaces.
Options Log sets and interior liners (one each Required) Choose from two beautifully detailed logs sets and four distinctive liners.
Choose from high definition, artisinally crafted logs sets shown in Driftwood (top) or Charred Oak (bottom). Shown with Buff Stacked Ceramic Fiber Liners.
Black Reflective Porcelain Liners
Buff Stacked
Vintage Red Stacked
Old Town Red Herringbone
EXCLUSIVE FEATURES Available in 35”, 40” and 45” clean-faced models Combo top/rear flue configuration for all models Electronic ignition with seamless battery backup to provide continued operation in the event of a power outage Outstanding heating efficiency for increased comfort and lower operating costs Ceramic glass for optimum heat transfer and a protective screen* High definition log selections (required) consist of Charred Oak or Driftwood Durable textured powder coat finish Factory installed blower with six speed settings to fine tune your heating needs
Included multi-function touch remote ADDITIONAL OPTIONS
Interior selections (required) consist of black reflective porcelain or a variety of ceramic fiber liners Mood enhancing interior illumination, with six distinctive settings Multi-function touch remote control (thermostat, flame, blower, lighting, IPI/CPI) Limited Lifetime Warranty *All applicable models comply with ANSI Z21.50/88 barrier requirements.
Traditional andirons
APPLIANCE SPECIFICATIONS
F
FRAMING SPECIFICATIONS NOTE: Dimension “D” is the required framing depth when the finish material (drywall) thickness is 1/2” (13mm).
Uses IHP SV 4-1/2"x7-1/2" direct vent pipe
G
10 1/2 (267)
Vent Framing—Top Vent with One 90° Elbow
J Blower Access
Framing construction to be 2 x 4, or larger.
5 1/8 7 (178) (130)
Gas Entry
12 1/8 (308)
C M
LB I E
OE ND 1/2 K A
KA
C D
A
B Gas Entry
Junction Box Access
BSCORPIO 40C 40-3/8" 36 1/4 - 895 38 3/4 - 984 41-1/4"* 41 1/4 - 1022
43 3/4 - 1111
41 1/4 -18" 1022
43 3/4 - 1111
43-3/4"
C =O Minimum height of top vent installations 23-3/8" 28-1/4"
H
A B C D E F G H I J
Model SCORPIO A 35 * K 35-3/8" 35” Model 35 1/4 - 895 L 36-1/4" * 40 1/4 - 1022 40” Model M 38-3/4" 45”NModel18" 45 1/4- 1149
SCORPIO 45 E D 45-3/8" 18 - 457 23 3/8 - 594 41-1/4"* 18 - 457 28 1/4 - 717 43-3/4" 1818"- 457 28 1/4 - 717 28-1/4"
4" for fold-up standoffs E *=Includes Minimum height of rear vent installations * Minimum opening size; additional 1/8” per side is recommended.
SCORPIO 35
SCORPIO 40
SCORPIO 45
32-1/8"
37-1/8"
37-1/8"
28-3/4"
33-1/4"
33-1/4"
22-1/4"
27-1/4"
27-1/4"
MODEL
FUEL
BTU/HR
AFUE**
P4 / ENERGUIDE*
32-3/8"
37-3/8"
42-3/8"
SCORPIO 35
NG
20,000
66%
64.0%
35-1/4"
40-1/4"
45-1/4"
SCORPIO 35
LP
19,000
66%
64.0%
25"
30"
35"
SCORPIO 40
NG
24,000
66%
64.0%
12-1/2"
15"
17-1/2"
32-7/8"
37-7/8"
FIREPLACE EFFICIENCIES
42-7/8"
17"
17"
17"
6-7/8"
6-7/8"
6-7/8"
SCORPIO 40
LP
22,000
66%
64.0%
SCORPIO 45
NG
28,000
67%
65.0%
SCORPIO 45
LP
26,000
67%
65.0%
*Intermittent ignition systems. **Annual Fuel Utilization Efficiency (AFUE) is the recognized U.S. rating system for the total efficiency of heating products.
On the cover: Scorpio shown with Black Reflective Porcelain Liners, Driftwood Logs and interior illumination.
IMPORTANT NOTES:
As with any fireplace, this appliance is extremely hot during operation. Read and understand all operating instructions before using this appliance. For further information, consult your dealer. Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance of the fire and heating performance. Performance can also vary with home design and insulation, climate, condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated. Diagrams, illustrations and photographs are not to scale—consult installation instructions. Product designs, materials, dimensions, specifications, colors and prices are subject to change or discontinuance without notice.
Approved for use with European Copper and Chimney Classics chimney tops, which improve performance and add an elegant touch.
Visit us online
PFS
© 2016 Innovative Hearth Products 785681M 10/16
Astria.us.com
C
®
US
Report #F13-094
Based on CSA P.4.1-09
